[ANN][GRE] GreenCoin - A Blockchain-Based Social Carbon Ecosystem

[biodieselchris]

Staking was working now after a reboot, nothing. Stake appears to be 0.

do I need to put in the line command "walletpassphrase <pass> <time> true" every time I boot up in order to enable stake?

yes, anytime the client is closed and reopened.

Chris..thnx for the confirmation...now how do I ensure all my coins are staked?

I put the command line in and after 10 mins about 2% of available coins in my wallet are staking. How do I get it up to 100% staked? Yes, the coins are all >24 hours old...do I need the wallet on for 24 hours IOT to stake them?

I have never delved into PoS before so maybe a few lines on how PoS works, how to enable and the particulars of greencoin PoS might be useful in the near future.

I'm not quite sure if those #'s mean exactly what is staking or not. For a lot of other coins I have noticed it doesn't really reflect these splits. Maybe Ahmed can elaborate?

[1715468073]

1715468073

[1715468073]

1715468073

[1715468073]

1715468073

[mrbodz]

yep, the number of coins that will stake depend on what coins have weight, the difficulty, the coinage etc

Ahmed

[Cranky4u]

Staking was working now after a reboot, nothing. Stake appears to be 0.

do I need to put in the line command "walletpassphrase <pass> <time> true" every time I boot up in order to enable stake?

yes, anytime the client is closed and reopened.

Chris..thnx for the confirmation...now how do I ensure all my coins are staked?

I put the command line in and after 10 mins about 2% of available coins in my wallet are staking. How do I get it up to 100% staked? Yes, the coins are all >24 hours old...do I need the wallet on for 24 hours IOT to stake them?

I have never delved into PoS before so maybe a few lines on how PoS works, how to enable and the particulars of greencoin PoS might be useful in the near future.

I'm not quite sure if those #'s mean exactly what is staking or not. For a lot of other coins I have noticed it doesn't really reflect these splits. Maybe Ahmed can elaborate?

I also read up on the walletpassphrase command > rom https://en.bitcoin.it/wiki/Original_Bitcoin_client/API_calls_list >>> walletpassphrase: Stores the wallet decryption key in memory for <timeout> seconds.

Assuming a wallet is not encrypted, one should not need to re-enter the walletpassphrase for every reboot as the walletpass is not used. Is this correct?

Also, the staking amount on display goes between 0 to a few million, not all, yet the little electric zap symbol in the bottom left of the wallet states all coins staked...any idea which one is telling the truth? Note: the spendable coins are in line with the total - stake display.

[james42]

I've had 0 connections all day, is there something wrong?

[psychofractor]

I've had 0 connections all day, is there something wrong?

Same-same, haven't synced for days... Nodes? Are the old ones still valid?

[biodieselchris]

Ahmed said the seed node went off line but is back up. Here is my peer listing if you want to use addnode:

Code:

[
{
"addr" : "149.210.234.234:11517",
"addrlocal" : "67.170.32.46:63417",
"services" : "00000001",
"lastsend" : 1452534208,
"lastrecv" : 1452534208,
"bytessent" : 10686,
"bytesrecv" : 8962,
"conntime" : 1452532045,
"timeoffset" : -6,
"pingtime" : 0.21500800,
"version" : 60018,
"subver" : "/Satoshi:1.2.1/",
"inbound" : false,
"startingheight" : 3966,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "212.243.7.37:11517",
"addrlocal" : "67.170.32.46:63418",
"services" : "00000001",
"lastsend" : 1452534208,
"lastrecv" : 1452534208,
"bytessent" : 10779,
"bytesrecv" : 16735,
"conntime" : 1452532045,
"timeoffset" : -6,
"pingtime" : 0.21000800,
"version" : 60018,
"subver" : "/Satoshi:1.2.1/",
"inbound" : false,
"startingheight" : 3966,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2a01:7c8:aab9:45:5054:ff:fe19:4707]:11517",
"addrlocal" : "[2601:602:8b00:c5f5:58fa:3695:b303:f5e7]:63419",
"services" : "00000001",
"lastsend" : 1452534208,
"lastrecv" : 1452534208,
"bytessent" : 5699,
"bytesrecv" : 4690,
"conntime" : 1452532046,
"timeoffset" : -6,
"pingtime" : 0.18000800,
"version" : 60018,
"subver" : "/Satoshi:1.2.1/",
"inbound" : false,
"startingheight" : 3966,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "45.55.250.196:11517",
"addrlocal" : "67.170.32.46:63420",
"services" : "00000001",
"lastsend" : 1452534208,
"lastrecv" : 1452534208,
"bytessent" : 10418,
"bytesrecv" : 4347,
"conntime" : 1452532046,
"timeoffset" : -6,
"pingtime" : 0.14500400,
"version" : 60018,
"subver" : "/Satoshi:1.2.1/",
"inbound" : false,
"startingheight" : 3966,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2001:918:ffdf:320:dc88:47ff:fea6:dc8e]:11517",
"addrlocal" : "[2601:602:8b00:c5f5:58fa:3695:b303:f5e7]:63431",
"services" : "00000001",
"lastsend" : 1452534198,
"lastrecv" : 1452534134,
"bytessent" : 4629,
"bytesrecv" : 5211,
"conntime" : 1452532092,
"timeoffset" : -5,
"pingtime" : 0.39000000,
"version" : 60018,
"subver" : "/Satoshi:1.2.1/",
"inbound" : false,
"startingheight" : 3966,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "[2601:602:8b00:c5f5:4050:c88f:f16:7ca8]:55954",
"addrlocal" : "[2601:602:8b00:c5f5:58fa:3695:b303:f5e7]:11517",
"services" : "00000001",
"lastsend" : 1452534201,
"lastrecv" : 1452534201,
"bytessent" : 8757,
"bytesrecv" : 8295,
"conntime" : 1452532400,
"timeoffset" : 1,
"pingtime" : 0.00300000,
"version" : 60018,
"subver" : "/Satoshi:1.2.1/",
"inbound" : true,
"startingheight" : 3970,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "94.211.9.70:11517",
"addrlocal" : "67.170.32.46:64007",
"services" : "00000001",
"lastsend" : 1452534198,
"lastrecv" : 1452534198,
"bytessent" : 3546,
"bytesrecv" : 1576,
"conntime" : 1452533549,
"timeoffset" : -5,
"pingtime" : 0.49600200,
"version" : 60018,
"subver" : "/Satoshi:1.2.1/",
"inbound" : false,
"startingheight" : 3980,
"banscore" : 0,
"syncnode" : false
}
]

[psychofractor]

Ahmed said the seed node went off line but is back up. Here is my peer listing if you want to use addnode:

Thanks! Here is the conf version:

addnode=149.210.234.234:11517
addnode=212.243.7.37:11517
addnode=45.55.250.196:11517
addnode=94.211.9.70:11517
addnode=[2001:918:ffdf:320:dc88:47ff:fea6:dc8e]:11517
addnode=[2a01:7c8:aab9:45:5054:ff:fe19:4707]:11517
addnode=[2601:602:8b00:c5f5:4050:c88f:f16:7ca8]:55954

[Lightsplasher]

Staking was working now after a reboot, nothing. Stake appears to be 0.

do I need to put in the line command "walletpassphrase <pass> <time> true" every time I boot up in order to enable stake?

yes, anytime the client is closed and reopened.

Chris..thnx for the confirmation...now how do I ensure all my coins are staked?

I put the command line in and after 10 mins about 2% of available coins in my wallet are staking. How do I get it up to 100% staked? Yes, the coins are all >24 hours old...do I need the wallet on for 24 hours IOT to stake them?

I have never delved into PoS before so maybe a few lines on how PoS works, how to enable and the particulars of greencoin PoS might be useful in the near future.

I'm not quite sure if those #'s mean exactly what is staking or not. For a lot of other coins I have noticed it doesn't really reflect these splits. Maybe Ahmed can elaborate?

I also read up on the walletpassphrase command > rom https://en.bitcoin.it/wiki/Original_Bitcoin_client/API_calls_list >>> walletpassphrase: Stores the wallet decryption key in memory for <timeout> seconds.

Assuming a wallet is not encrypted, one should not need to re-enter the walletpassphrase for every reboot as the walletpass is not used. Is this correct?

Also, the staking amount on display goes between 0 to a few million, not all, yet the little electric zap symbol in the bottom left of the wallet states all coins staked...any idea which one is telling the truth? Note: the spendable coins are in line with the total - stake display.

A few notes on staking.  Your wallet needs to be unlocked to stake but if it was never encrypted it is by definition unlocked.  The value shown under “Stake” on the dashboard shows coins that are temporarily unavailable because they have recently staked (minted) a block.  These coins become available after 21 confirmations and begin to show up again in the “weight” shown under the little lighting bolt icon.  (There does not appear to be a 24 hour waiting period after the coins stake and I am very unclear what this is referring too.)

As more coins and wallets join up the time to stake a block will increase because you are competing with the other miners to earn the block reward and mint the next block.  At this point I'm showing a 12 hour wait to stake the next block.  If I go off-line with the wallet of course this time will go up because this is really just showing the chance of something happening based on the current conditions.  

I hope that helps a bit.

[biodieselchris]

I anticipate running 3 pays worth of Producer payouts tonight (1/9, 1/10, and 1/11). The totals won't match the website just yet because the website uses a formula to calculate coins based on the old blockchain. They will be paid base don the new daily coin totals which haven't been integrated at www.grcoin.com yet. I'll work backwards to get that to match as I update the web.

I also want to add data to the blockchain, something like "P: 1; SYSTYPE: PVS; MR: 1200, MDIFF: 6.0; CC: 2.886; KGC: 2.8; TKGC 13842.3432"

P = GreenCoin Foundation Renewable Producer #
SYSTYPE = System type (e.g. PVSolar or WV-Biodiesel)
MR = Meter read
MDIFF = meter differential from previous reading
CC: carbon conversion for given system type (i.e., PVsolar and Biofuel are different)
KG = carbon dioxide equivalent, in kg
TKG = total CO2 for that day among all producers

Comments can be added to payouts simply in quotes such as $./greencoind sendtoaddress <greencoinaddress> <amount> [comment] [comment-to]
It can also be placed in the OP_RETURN

(not sure the difference between "comment" or "comment-to" if someone knows)

The reason for this is 3rd parties could build explorers and databases that makes use of this data for free. That might be helpful in expanding our carbon crediting imperative if people can see and utilize this information right off the blockchain.

So let me know any thoughts on that idea.

[bumbacoin]

that's cool idea.
using something like JSON format or other recognisable data format might be useful for more efficient parsing.

i recall some coins only like one OP_RETURN per block ?


edit.
although if you create your own consistent format you may be able to squeeze more data in (that of course does not preclude using a recognisable data format as well for your reduced info)
you could assume headers for example, so that information could be removed from input making it smaller

i.e. your example above, if you assume the headers/ordering you use
"P: 1; SYSTYPE: PVS; MR: 1200, MDIFF: 6.0; CC: 2.886; KGC: 2.8; TKGC 13842.3432"

becomes

"1; PVS; 1200; 6.0; 2.886; 2.8; 13842.3432"

[biodieselchris]

that's cool idea.
using something like JSON format or other recognisable data format might be useful for more efficient parsing.

i recall some coins only like one OP_RETURN per block ?


edit.
although if you create your own consistent format you may be able to squeeze more data in (that of course does not preclude using a recognisable data format as well for your reduced info)
you could assume headers for example, so that information could be removed from input making it smaller

i.e. your example above, if you assume the headers/ordering you use
"P: 1; SYSTYPE: PVS; MR: 1200, MDIFF: 6.0; CC: 2.886; KGC: 2.8; TKGC 13842.3432"

becomes

"1; PVS; 1200; 6.0; 2.886; 2.8; 13842.3432"

I see. I was going for the key value pair but you don't think that's fruitful (i.e., not JSON-y?). There are two places to put data, the OP_RETURN could be encrypted but since this isn't personal info I didn't see the need for OP_RETURN use in this case, though the 1 OP_RETURN per block is troubling if anyone else knows about that.

[biodieselchris]

Producers: I am finalizing the set-up to payout the new coins. Here are some of the facts, comments, and forward-looking intentions as it relates to the first 11 days of this year and the completed PoS switchover, with respect to getting the Producer payout system back up and running fully:

The Foundation officially supported the old block chain until Block # 801739 (Block Time: January 2, 2016, 23:51:42 GMT)

The entire January 1st, 2016 payout day occurred before the end of this support (#800594 was the actual last block # a tx shows up).

January 2nd through January 7th I continued to pay out on the old chain. During this time the final status of a successful switch to PoS was uncertain. On January 9th (and before paying out the Jan 8 file), the PoS began working on the new chain, block #564 at time = 1/9/16 12:33 PM. Without a block explorer I went and found all of the blocks that occur just prior to 4 AM GMT, which is the official daily cutoff for payments going back to the first operating day. They are as follows:

Payout day   Block   Coins
1/9/16         2718   ~4,188,000
1/10/16       3567   ~1,698,000
1/11/16       4320   ~1,506,000

Today I successfully got the new Foundation wallet up and running on a linux machine. The coin amounts above are estimated. I know the balance of the Foundation wallet now and subtract back for the block # by 2000 coins/block. However, I don't know the exact balance at the given points in time so I will use these.

For the period of Jan 2-8 I was going to donate in coins to match the payouts that were made (calculated) on the old chain. Given that the first day of staking had a rather large total coin gross, I propose utilizing this 4.2M by spreading it over the 3 days prior, that is the 7th-9th, leaving me with the burden of only donating in for the 2nd through the 6th, which is still 5 days (~7M coins). That yields about 1.4M per day for those 3 days, which is close to the daily target of 720 block (1.44M coins).

 

[altcointrader25]

Ahmed said the seed node went off line but is back up. Here is my peer listing if you want to use addnode:

https://1broker.com/m/r.php?i=8768https://www.bitfinex.com/?refcode=JuvbcI1CzIhttps://www.bitmex.com/register/f1qY9qhttps://www.okcoin.com/?invid=2076079https://simplefx.com/?sfx-r=fb817c64-a4af-4d28-9d5e-8eb918121483https://bit4x.com/invite/2c724af5https://localbitcoins.com/?ch=4vi3https://www.quadrigacx.com/?ref=jsmu1vwd8mir1a35fa67ogwbhttps://primedice.com/?ref=CarlJeffhttps://purse.io/?_r=B2Z_KK

Thanks! Here is the conf version:

addnode=149.210.234.234:11517
addnode=212.243.7.37:11517
addnode=45.55.250.196:11517
addnode=94.211.9.70:11517
addnode=[2001:918:ffdf:320:dc88:47ff:fea6:dc8e]:11517
addnode=[2a01:7c8:aab9:45:5054:ff:fe19:4707]:11517
addnode=[2601:602:8b00:c5f5:4050:c88f:f16:7ca8]:55954

Thanks for this, makes it easier.

[psychofractor]

Ahmed said the seed node went off line but is back up. Here is my peer listing if you want to use addnode:

Thanks! Here is the conf version:

addnode=149.210.234.234:11517
addnode=212.243.7.37:11517
addnode=45.55.250.196:11517
addnode=94.211.9.70:11517
addnode=[2001:918:ffdf:320:dc88:47ff:fea6:dc8e]:11517
addnode=[2a01:7c8:aab9:45:5054:ff:fe19:4707]:11517
addnode=[2601:602:8b00:c5f5:4050:c88f:f16:7ca8]:55954

Thanks for this, makes it easier.

Not that it does any good, though, I have 0 connections...

[psycodad]

Ahmed said the seed node went off line but is back up. Here is my peer listing if you want to use addnode:

Thanks! Here is the conf version:

addnode=149.210.234.234:11517
addnode=212.243.7.37:11517
addnode=45.55.250.196:11517
addnode=94.211.9.70:11517
addnode=[2001:918:ffdf:320:dc88:47ff:fea6:dc8e]:11517
addnode=[2a01:7c8:aab9:45:5054:ff:fe19:4707]:11517
addnode=[2601:602:8b00:c5f5:4050:c88f:f16:7ca8]:55954

Thanks for this, makes it easier.

Not that it does any good, though, I have 0 connections...

My node is listed twice above and I have currently 13 connections.
Are you sure you are running the very latest version of the wallet have reindexed/rescanned as per Ahmeds instructions?
I see two rejected/banned IPs in my logs, that's why I am asking.

[psychofractor]

My node is listed twice above and I have currently 13 connections.
Are you sure you are running the very latest version of the wallet have reindexed/rescanned as per Ahmeds instructions?
I see two rejected/banned IPs in my logs, that's why I am asking.

Ok, found the problem: it has to be GreencoinV2.conf, not Greencoin.conf! Seriously, that is NOT obvious!

SO, I'm synced and staking!

[biodieselchris]

My node is listed twice above and I have currently 13 connections.
Are you sure you are running the very latest version of the wallet have reindexed/rescanned as per Ahmeds instructions?
I see two rejected/banned IPs in my logs, that's why I am asking.

Ok, found the problem: it has to be GreencoinV2.conf, not Greencoin.conf! Seriously, that is NOT obvious!

SO, I'm synced and staking!

yep, sorry about needing the conf and we'll ty to get the wallet to an installed version soon. The key here was getting a stable PoS coin out, which Ahmed did a terrific job getting accomplished, and from here we can start piling on the upgrades and features.

[psychofractor]

yep, sorry about needing the conf and we'll ty to get the wallet to an installed version soon. The key here was getting a stable PoS coin out, which Ahmed did a terrific job getting accomplished, and from here we can start piling on the upgrades and features.

Gotcha, and thank you both for you efforts!

[james42]

Have any producer payouts been made yet? I can't seem to see any in my new wallet

[biodieselchris]

Have any producer payouts been made yet? I can't seem to see any in my new wallet

So on the Producer payouts here is the deal. I've had some website issues which I detail below. However, I want to point out that the Foundation wallet is accumulating coins and ALL COINS WILL EVENTUALLY BE PAID OUT. My request is Producers continue to use the website as they always have, entering meter readings as you've done before because this memorializes the meter data which is the key. What this does is allow me to produce a daily payout using the current website mechanism (the old blockchain data). Once I can get to the proper stage in the web update I will roll the database back to Jan 7th and re-calculate the coins to be paid against the coin totals for that day on the new chain. You will receive coins for that day in the same proportion that they were calculated using the old chain (albeit, updated for the differing coin total shown below --- and in actuality it will be quite close). Below is the payout schedule where we stand as of tonight's payout:

Payout Date     Block #     Daily blocks     Payout coins     Coins in Wallet
1/7/2016              1322                698              1,396,000        1,396,000
1/8/2016              2020                698              1,396,000        2,792,000
1/9/2016              2718                698              1,396,000        4,188,000
1/10/2016            3567                849              1,698,000        5,886,000
1/11/2016            4320                753              1,506,000        7,392,000
1/12/2016            5030                710              1,420,000        8,812,000
1/13/2016            5746                716              1,432,000       10,244,000
1/14/2016            6463                717              1,434,000       11,678,000

As I pointed out previously, all payouts up to and including Jan 1 were made before block 801,739 of the old blockchain and are therefore transferable onto the new blockchain. Payouts for Jan 2 through Jan 6 will be donated by me (through the Foundation) on a 1 for 1 basis. There is nothing to do here, I will send them at some point in the future. I will do this after the web stuff is chugging along so I can memorialize it on a webpage that explains everything and has txid's. The new coin officially began staking on Jan 9, though it found 2718 blocks in that first day of which 624 were PoW (0 reward) and 2,094 were PoS (4,188,000 coins). Since this is about 3X a normal day's worth of staking, I felt it was fair to apply these coins back 2 days (Jan 7th and 8th) as well, thereby effectively making these donation days the responsibility of the Foundation coins. Considering the anomaly of the first days of staking (~3x the # of blocks than normal), I thought and was hoping this would be OK with the Producers for those days. On a side note, the staking seems to have settled down very nicely and is chugging along at ~720 per day which is right on target. Nicely done Ahmed!


So as for the web: I have been using the website (grcoin.com) to spit out the coin payment calculation, which was "professionally done" (the backend is pretty good even the front end isn't much to look at). I didn't have any more funding so I stopped using the contracting services back in 2014. In late 2014 the old coin started to experience issues and that became the priority. I didn't have time or the imperative to do the website stuff if I didn't know if the coin (and therefore the project) would ultimately need to be abandoned. But now in hindsight I wish I had spent more time on it! It obviously took awhile to fix the coin, about 13 months, but now it's done as of 1/9/16 and all of sudden I'm way behind on the web and subsequent heavy marketing that I'd like to do. I have recently begun working on it in earnest by myself but ran into an immediate problem: I can't deploy any updates to the web. I've issued a stack overflow question here.

If anyone can help or knows someone with Rails experience that could spend a little time with this project I would be much obliged, it might help speed things up a bit. For my part I'm committed to staying up late and working on what I can and going to meet-up groups starting next Monday to sit with others who could help and maybe entice them to join the project. Even after I get past the pesky deployment error there's still much to do:

1) update the database to produce the calculation for the new coin [hard]
2) cosmetic upgrades [not that hard, but time-consuming]
3) ease of use for new sign-ups and content [some hard, some time-consuming]

The first step represents the point I need to get to in order to produce the new script files I can feed into the Foundation wallet and payout the new coins, and update the database with the new information so your coin totals are correct on your user pages. At this time I will be able to rip through all of the payments that haven't been made yet in one fell swoop (and will payout the donations for the missed days here as well). The second step is just absolutely necessary to attract users who hear about greencoin through our marketing efforts (or watch the slick movie), and the third is necessary to make signing up solar producers seamless and easy (automatic emails, easy to find instructions, etc.).

This is all a lot of work, for which I am totally committed, but at the same time any additional help just accelerates things along.

I hope this sounds like an actionable plan for everyone.