i quit

[minerjoen]

hey guys, i just closed the wallet because i didnt earn any stake while my coins are older then 8,5 hours. Now when reopen the wallet it dont sync and dont connect to the nodes.
I checked the .conf file and nothing changed, so the nodes are still inside.

I dont ask to close and re-open the wallet because maybe u guys will get the same problem, but what can i do?

edit: i used the next example:
rpcuser=litedogerpc
rpcpassword=litedogepasw
listen=1
daemon=1
server=1
maxconnections=1024
rpcport=17015
rpcallowip=127.0.0.1
enableaccounts=1
staking=0
addnode=ldoge.manhattanmine.com
addnode=ldoge.minerpools.com
addnode=ldoge.binpool.com
addnode=45.56.117.191
addnode=212.71.254.189

Now its synced again, but should u put staking=0 on a 1 to get stake or isn't it important to get the stake?

Give it some more time..

Its not like the coins will stake instantly after the 8 hours.

yeah indeed i understand that, but then still the question, in my .conf file, should it be staking=1 or 0, normaly 0 is off, and 1 is on.  So with some simply toughts it should be staking=1. Or maybe delete the whole command line?

Simply delete it.

1 would be ON, 0 would be OFF. You want 1 - which is the Default.

Thanks, indeed normally i dont even got the command line: staking=1 or =0, and it still stake. But because a pool owner posted this command line i tought maybe it works different on this coin.

Anyway, i will delete the commandling staking=x

[shimlbit]

I like the little doge but failed to mine any 


Anyone like to give me a few  dR4VyQVrx93Ssv6yecEvfRePTHrcEJvrXM

I'd help promote or something 

i sent you several litedoge after confirmed coin on my pool

Cool Thankyou.

what a scrounger

[minerjoen]

haha buy orders from 1 sat on alcurex? Come on:P nobody is that stupid. Beter start asking at 10 sat, so we can grow till 60-100 sat. But dont start with 1 sat.. thats sad

[halibit]

Such LIte Doge can now trade on alcurEX.
https://alcurex.org/index.php/crypto/market?pair=LDOGE_BTC

Welcome to alcurEX LiteDoge

LiteDoge added also on LTC market section.
https://alcurex.org/index.php/crypto/market?pair=LDOGE_LTC

it's good sir , now i can't sell but i can buy some LDOGE

Soon you can also sell and we are ready with market.
On meanwhile .. if you have not yet, Go open account on alcurEX exchange:)
It's free of course.

[lordcisco]

How will you know if your staking is working some post a screen shot plox

[ncsupanda]

How will you know if your staking is working some post a screen shot plox

Bottom left, look at the lightning bolt.

[lordcisco]

what about the bolt does it light up none of the icons there are hoverable or clickable?

[Tuwie2]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block. 

[minerjoen]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block.  

mine say: not staking

And why not? my coins are almost 10 hours old.

Edit: i enter the command line: staking=1 in my .conf and now he sayd wallet is not staking because wallet is offline -.-

[Framauro]

hey guys, i just closed the wallet because i didnt earn any stake while my coins are older then 8,5 hours. Now when reopen the wallet it dont sync and dont connect to the nodes.
I checked the .conf file and nothing changed, so the nodes are still inside.

I dont ask to close and re-open the wallet because maybe u guys will get the same problem, but what can i do?

edit: i used the next example:
rpcuser=litedogerpc
rpcpassword=litedogepasw
listen=1
daemon=1
server=1
maxconnections=1024
rpcport=17015
rpcallowip=127.0.0.1
enableaccounts=1
staking=0
addnode=ldoge.manhattanmine.com
addnode=ldoge.minerpools.com
addnode=ldoge.binpool.com
addnode=45.56.117.191
addnode=212.71.254.189

Now its synced again, but should u put staking=0 on a 1 to get stake or isn't it important to get the stake?

Give it some more time..

Its not like the coins will stake instantly after the 8 hours.

yeah indeed i understand that, but then still the question, in my .conf file, should it be staking=1 or 0, normaly 0 is off, and 1 is on.  So with some simply toughts it should be staking=1. Or maybe delete the whole command line?

Simply delete it.

1 would be ON, 0 would be OFF. You want 1 - which is the Default.

Thanks, indeed normally i dont even got the command line: staking=1 or =0, and it still stake. But because a pool owner posted this command line i tought maybe it works different on this coin.

Anyway, i will delete the commandling staking=x

Now we on the subject of the config file, what does enableaccount=1..

[Tuwie2]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block. 

mine say: not staking

And why not? my coins are almost 10 hours old.

What does it say, exactly.  Does it say not staking because you dont have mature coins?


Make sure you dont have staking=0 in your conf file.  If you do, remove it.

[minerjoen]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block.  

mine say: not staking

And why not? my coins are almost 10 hours old.

What does it say, exactly.  Does it say not staking because you dont have mature coins?


Make sure you dont have staking=0 in your conf file.  If you do, remove it.

only thing i have inside my .conf is:
addnode=ldoge.manhattanmine.com
addnode=ldoge.minerpools.com
addnode=ldoge.binpool.com
addnode=45.56.117.191
addnode=212.71.254.189

message: wallet is not staking because wallet is offline.

edit: after 1 min, the lightning bolt say: not staking  (that's it, no reason )

[lordcisco]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block. 

"not staking because you don't have mature coins"   how longs that take im almost up to 2 mil coins and been mining since creation, Is anyone else out there able to stake yet?

[netoo]

The only thing that needs to be in your config file is

addnode=45.56.117.191
addnode=212.71.254.189


your wallet will start staking if its not locked "password protected"

edit :   my wallet is staking it says "expected time to earn a reward is 43 minutes"

[hayan]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block. 

"not staking because you don't have mature coins"   how longs that take im almost up to 2 mil coins and been mining since creation, Is anyone else out there able to stake yet?

You need to have had your coins for 8 hours without spending them, even if you have some left over. (Technically "don't spend them at all" isn't quite accurate, but if you don't understand how staking works, it's a good guideline to use for now.)

[Tuwie2]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block. 

"not staking because you don't have mature coins"   how longs that take im almost up to 2 mil coins and been mining since creation, Is anyone else out there able to stake yet?

Well, there is your answer, your coins havent matured yet.  THey need to be in your wallet for at least 8 hours.  That means, you mine it, wait 510 confirms to send it from the pool to your wallet, then you wait 8 hours for the coins to mature and be able to stake.

PoS is working fine, I just got another PoS block a couple minutes ago

[nikkers]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block.  

"not staking because you don't have mature coins"   how longs that take im almost up to 2 mil coins and been mining since creation, Is anyone else out there able to stake yet?

Yes i had a couple of juicy stakes already

All i've done is add the addnodes, nothing else, wallet is as i downloded it .

[lordcisco]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block. 

"not staking because you don't have mature coins"   how longs that take im almost up to 2 mil coins and been mining since creation, Is anyone else out there able to stake yet?

You need to have had your coins for 8 hours without spending them, even if you have some left over. (Technically "don't spend them at all" isn't quite accurate, but if you don't understand how staking works, it's a good guideline to use for now.)

ok I think I get it mine aren't mature yet because haven't gone through the 510 yet since I just dumped in from pool a coup mil and set up an auto transfer now, guess I should have gotten that set up right away thanks for the help people .

[halibit]

First LiteDoge landing on alcurEX. 
https://alcurex.org/index.php/crypto/market?pair=LDOGE_BTC

[Tuwie2]

what about the bolt does it light up none of the icons there are hoverable or clickable?

Just mouseover on the lightning icon, it will either tell you that you dont have mature coins yet, or it will show your stake weight and estimated time to earn a PoS block. 

"not staking because you don't have mature coins"   how longs that take im almost up to 2 mil coins and been mining since creation, Is anyone else out there able to stake yet?

You need to have had your coins for 8 hours without spending them, even if you have some left over. (Technically "don't spend them at all" isn't quite accurate, but if you don't understand how staking works, it's a good guideline to use for now.)

ok I think I get it mine aren't mature yet because haven't gone through the 510 yet since I just dumped in from pool a coup mil and set up an auto transfer now, guess I should have gotten that set up right away thanks for the help people .

Just to clarify, from the time they hit your wallet, count 8 hours.  That is when they will start staking.

So if you just put them in your wallet at say 10am eastern time, they will start to stake at 6pm eastern time.

The 510 confirms, is how long it takes mined coins to mature, so when you find a block, wether its PoW or PoS block, the coins earned from finding it will be available to spend after 510 confirms.