loszhor
|
|
March 30, 2015, 06:17:27 AM |
|
I noticed some posts about syncing issues and I would like to recommend that you close your wallet and reopen it at least one a day but no more than two. Staking over long periods can cause memory leak issues that differ based on a wallet's design and algorithm. Quick coins with memory heavy algorithms can leak a lot of memory over time while slower, less intensive ones can stake for days without issue but if the wallet is poorly designed it could also cause issues and is something to look out for when deciding on what to stake. Doing so may also help you to avoid having stake blocks rejected as if your connection to the network is bad or spotty it can potentially fail to get through or be too late by the time that it does. Also, if your wallet is in a state where it is having memory issues you will not be staking to your full potential. Think of it as trying to do some thing important on your computer when you are lagging bad. A good test that I use to visually tell if a wallet needs to be restarted is to click drag it around a see how far of a "trail" it makes. Nearly all wallets will do so when staking but if it is taking up more memory than usual the trail will be longer and the journey will be "choppy". So take note on what the usual kind of trail your wallets makes. So if you have an expected block time of a few hours and you have barely staked anything within a few days and likewise have not closed your wallet in that much time as well you might consider doing so. Remember, the act of stopping and restarting staking does not affect you in anyway. Only the act of moving them will do so. Taking what I just said above into account, I would like to bring up some helpful staking information to aid you all if you are doing so and need some more information. Using coin control is essential to get the most out of your staking long term so make sure to take full advantage of it. Blocks that are too small will not be helpful in staking and they will just take up space. So make sure to combine blocks when necessary. This is also a good practice to ensure that you do not use up too much memory if you have many coins. As stated in the Hobonickels wiki, many small blocks take up more resources to process. See both articles for good information. Proof of stake: http://wiki.hobonickels.info/index.php?title=Proof_of_StakeCoin Control: http://wiki.hobonickels.info/index.php?title=Coin_Control The numbers given for the blocks sizes are for that coin's settings and since LDOGE is a full block per stake a yearly percent is not applicable. Let me know if you having any questions and I will answer the best that I can.
|
16wQCVFXYuSp4AYsBqV9Uqa2dd1V4YXvJ5
|
|
|
loszhor
|
|
March 30, 2015, 06:18:40 AM |
|
your wallet has a coin control featuers why dont you guys make a Youtube video for that, it would be really nice for the community and should be helpful in market your coin, check d57heinz and minerFTW PM on IRC channel What timing, I just mentioned that as of right now. Do you need help on how to use it?
|
16wQCVFXYuSp4AYsBqV9Uqa2dd1V4YXvJ5
|
|
|
kevin1234a
Legendary
Offline
Activity: 1162
Merit: 1000
Decentralizing Jesus on the Blockchain
|
|
March 30, 2015, 06:22:06 AM |
|
your wallet has a coin control featuers why dont you guys make a Youtube video for that, it would be really nice for the community and should be helpful in market your coin, check d57heinz and minerFTW PM on IRC channel What timing, I just mentioned that as of right now. Do you need help on how to use it? yeah man its coincidence, you can also quote hyperstake they have similar features and youtube clips too. loving your write up
|
|
|
|
loszhor
|
|
March 30, 2015, 06:31:58 AM |
|
your wallet has a coin control featuers why dont you guys make a Youtube video for that, it would be really nice for the community and should be helpful in market your coin, check d57heinz and minerFTW PM on IRC channel What timing, I just mentioned that as of right now. Do you need help on how to use it? yeah man its coincidence, you can also quote hyperstake they have similar features and youtube clips too. loving your write up HYP has a wonderful "set threshold" feature that allows you to set how big you want your blocks to be at all times and will automatically split blocks as they come in. It is a very convenient feature that I wish other coins would adopt. Let me know what you specifically want to know and I will help you the best that I can.
|
16wQCVFXYuSp4AYsBqV9Uqa2dd1V4YXvJ5
|
|
|
kevin1234a
Legendary
Offline
Activity: 1162
Merit: 1000
Decentralizing Jesus on the Blockchain
|
|
March 30, 2015, 06:44:08 AM |
|
your wallet has a coin control featuers why dont you guys make a Youtube video for that, it would be really nice for the community and should be helpful in market your coin, check d57heinz and minerFTW PM on IRC channel What timing, I just mentioned that as of right now. Do you need help on how to use it? yeah man its coincidence, you can also quote hyperstake they have similar features and youtube clips too. loving your write up HYP has a wonderful "set threshold" feature that allows you to set how big you want your blocks to be at all times and will automatically split blocks as they come in. It is a very convenient feature that I wish other coins would adopt. Let me know what you specifically want to know and I will help you the best that I can. yes pls... PM me pls since it would be unethical to discuss them here i am a supporter to these guys too :D:D
|
|
|
|
Andrewwattson
Member
Offline
Activity: 85
Merit: 10
|
|
March 30, 2015, 03:12:57 PM |
|
Could someone please tell me how to recover a wallet? Im glad I didn't send any to the one I had as I am not able to recover it and the only options are to backup and export. Of course sign and verify a message is there to but I don't see a open option. I even tryed adding it to the appdata and that didn't work either. Any help would be appreciated. Not sure if this was covered apologies if so.
get the latest wallet version from the first page Then delete everything in your appdata folder ONLY DO NOT DELETE WALLET.DAT. Ok thanks but the issue seems to be that I cant rename wallets. Never had that issue before. If you rename your main wallet it will replace it with a new one named wallet.dat when you try to recover it.
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
March 30, 2015, 03:49:44 PM |
|
Could someone please tell me how to recover a wallet? Im glad I didn't send any to the one I had as I am not able to recover it and the only options are to backup and export. Of course sign and verify a message is there to but I don't see a open option. I even tryed adding it to the appdata and that didn't work either. Any help would be appreciated. Not sure if this was covered apologies if so.
get the latest wallet version from the first page Then delete everything in your appdata folder ONLY DO NOT DELETE WALLET.DAT. Ok thanks but the issue seems to be that I cant rename wallets. Never had that issue before. If you rename your main wallet it will replace it with a new one named wallet.dat when you try to recover it. first backup the wallet your needing to recover.. Then goto the appdata directory and just copy the one you want to that folder and tehn make sure its named wallet.dat and it will automatically find it on wallet start.. I hope that gets ya going Once you get it rolling post your address ill send ya some to get ya started staking.. just remember its doesn't start staking till 8 hours after I send to you. then depending on amount staking you will get your "expected" time to stake.. and I say that loosely as you can get lucky and find one right away or it could be double the time.. Edit: this wallet doesn't allow for multiple wallets such as multibit for btc.. If you want multiple wallets you will have to have them running on multiple machines as the wallet doesn't allow you to rename or open a new one.. basically your only option at this time would be keeping track of certain wallet.dat by a folder.. just name the folder the same as your wallet address then whne you need to open that wallet you can just copy the one your using in appdata to the corresponding folder named after the wallet addy then copy the other folder wallet.dat to appdata.. its a round about way of getting it done.. but that is all i can come up with atm Best Regards d57heinz
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
March 30, 2015, 03:57:27 PM Last edit: March 30, 2015, 04:13:47 PM by d57heinz |
|
It also may be possible to run multiple instances of a wallet using the datadir=wallet directory in your conf file.. I haven't done this myself but im sure its possible to run many wallets of the same coin on one computer.. Edit after thinking about this a bit longer.. I think you would have to pass a flag to the wallet start where to find the conf file.. idk as the wallet will default to the main conf and if you try to run two it will both use same data directory which will not work.. let me do some more digging and il get back to you Edit got some good help in irc.. you would have to start your wallet with the litedoged --datadir=walletdirectory then once that is started goto second wallet instance and start with litedoged --datadir=2ndwalletdirectory you may also need to rename the 2nd litedoged start file for the second instance not too sure Best Regards d57heinz
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
|
bitrev
|
|
March 30, 2015, 06:46:56 PM |
|
|
|
|
|
Andrewwattson
Member
Offline
Activity: 85
Merit: 10
|
|
March 30, 2015, 06:56:02 PM |
|
Could someone please tell me how to recover a wallet? Im glad I didn't send any to the one I had as I am not able to recover it and the only options are to backup and export. Of course sign and verify a message is there to but I don't see a open option. I even tryed adding it to the appdata and that didn't work either. Any help would be appreciated. Not sure if this was covered apologies if so.
get the latest wallet version from the first page Then delete everything in your appdata folder ONLY DO NOT DELETE WALLET.DAT. Ok thanks but the issue seems to be that I cant rename wallets. Never had that issue before. If you rename your main wallet it will replace it with a new one named wallet.dat when you try to recover it. first backup the wallet your needing to recover.. Then goto the appdata directory and just copy the one you want to that folder and tehn make sure its named wallet.dat and it will automatically find it on wallet start.. I hope that gets ya going Once you get it rolling post your address ill send ya some to get ya started staking.. just remember its doesn't start staking till 8 hours after I send to you. then depending on amount staking you will get your "expected" time to stake.. and I say that loosely as you can get lucky and find one right away or it could be double the time.. Edit: this wallet doesn't allow for multiple wallets such as multibit for btc.. If you want multiple wallets you will have to have them running on multiple machines as the wallet doesn't allow you to rename or open a new one.. basically your only option at this time would be keeping track of certain wallet.dat by a folder.. just name the folder the same as your wallet address then whne you need to open that wallet you can just copy the one your using in appdata to the corresponding folder named after the wallet addy then copy the other folder wallet.dat to appdata.. its a round about way of getting it done.. but that is all i can come up with atm Best Regards d57heinz Thanks for the information definitely appreciated. dEMcCDjXPjg69dUsx7WmYWmw9X8mxw6WGK
|
|
|
|
Abitcoinfuture
|
|
March 31, 2015, 12:31:10 AM |
|
After Fixing my Sync issue I was able to recover my tens of millions of Ldoge... now when I try to send a transaction the wallet closes and returns and error, any suggestions?
|
|
|
|
kbroadfoot
Legendary
Offline
Activity: 1302
Merit: 1000
Bass Player
|
|
March 31, 2015, 12:47:55 AM |
|
After Fixing my Sync issue I was able to recover my tens of millions of Ldoge... now when I try to send a transaction the wallet closes and returns and error, any suggestions?
How large a transaction? Some coins have size limits... 10's of millions may qualify...
|
|
|
|
Abitcoinfuture
|
|
March 31, 2015, 01:45:52 AM |
|
After Fixing my Sync issue I was able to recover my tens of millions of Ldoge... now when I try to send a transaction the wallet closes and returns and error, any suggestions?
How large a transaction? Some coins have size limits... 10's of millions may qualify... Nah just trying to send 500k to bittrex to test the network make sure it's correct... so that shouldnt be an issue. It just crashes when I hit send after putting in my passphrase.
|
|
|
|
striker7334 2.0
Sr. Member
Offline
Activity: 560
Merit: 300
Unprofessional shitcoin trader since 2011
|
|
March 31, 2015, 01:49:02 AM |
|
Looks cool killer logo my girl fell in love with it. I doubt this coin is dead its gaining attention quick and its not like the price can really even go down lol with that said... BUY, HOLD, STAKE!!!
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
March 31, 2015, 02:45:10 AM |
|
Could someone please tell me how to recover a wallet? Im glad I didn't send any to the one I had as I am not able to recover it and the only options are to backup and export. Of course sign and verify a message is there to but I don't see a open option. I even tryed adding it to the appdata and that didn't work either. Any help would be appreciated. Not sure if this was covered apologies if so.
get the latest wallet version from the first page Then delete everything in your appdata folder ONLY DO NOT DELETE WALLET.DAT. Ok thanks but the issue seems to be that I cant rename wallets. Never had that issue before. If you rename your main wallet it will replace it with a new one named wallet.dat when you try to recover it. first backup the wallet your needing to recover.. Then goto the appdata directory and just copy the one you want to that folder and tehn make sure its named wallet.dat and it will automatically find it on wallet start.. I hope that gets ya going Once you get it rolling post your address ill send ya some to get ya started staking.. just remember its doesn't start staking till 8 hours after I send to you. then depending on amount staking you will get your "expected" time to stake.. and I say that loosely as you can get lucky and find one right away or it could be double the time.. Edit: this wallet doesn't allow for multiple wallets such as multibit for btc.. If you want multiple wallets you will have to have them running on multiple machines as the wallet doesn't allow you to rename or open a new one.. basically your only option at this time would be keeping track of certain wallet.dat by a folder.. just name the folder the same as your wallet address then whne you need to open that wallet you can just copy the one your using in appdata to the corresponding folder named after the wallet addy then copy the other folder wallet.dat to appdata.. its a round about way of getting it done.. but that is all i can come up with atm Best Regards d57heinz Thanks for the information definitely appreciated. dEMcCDjXPjg69dUsx7WmYWmw9X8mxw6WGK Sent ya a little just got back to pc:) Happy staking!! Best regards d57heinz
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
Abitcoinfuture
|
|
March 31, 2015, 04:33:40 AM |
|
Wallet
Sometimes I get error number -30xxx and it says cannot open database, but that is when it crashes while staking, if I try to send a transaction while not staking I get the following error..
EXCEPTION: St13runtime_error CWallet:;GenerateNewKey() : AddKey failed C:\Users\Owner\Desktop\Litedoge-qt.exe in Runaway exception
|
|
|
|
DogePentagon
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 31, 2015, 04:34:54 AM |
|
https://i.imgur.com/UY6iMMs.pngThe most important thing you need to know is that you must not delete your wallet.dat file! As long as you backup your current wallet.dat file, you will be safe.Here’s how to sync and repair your LiteDoge wallet:Step 1:Backup your wallet.dat file Copy your wallet.dat to a new location! Failure to do this will result in A LOSS OF ALL COINS Wallet locations: C:\Users\ %username% \AppData\Roaming\LiteDoge\wallet.datStep 2:Download the LiteDoge wallet from first page First page: https://bitcointalk.org/index.php?topic=985182.0Source: https://mega.co.nz/#!2VMTHT5T!BaU_KBPiJX0cyDq6xe6vFGi-B7C_0Sm9-VvluFCwEAQStep 3:Move the LiteDoge user data folder (rename to LiteDoge.old) Step 4:Install the new client Step 4a:Start the LiteDoge program briefly to create the LiteDoge data folder (otherwise theres nowhere to put the backed up wallet.dat). Step 4b:Close the LiteDoge QT (the wallet) Step 5:Replace the new wallet.dat with your backed up version Step 6:Run the wallet and wait the blockchain to resync. (Failed resync? => "LiteDoge.conf" with latest addnodes at C:\Users\ %username% \AppData\Roaming\LiteDoge\ or just copy "LiteDoge.conf" from your "Step 3" renamed folder "LiteDoge.old" ) Step 7:Run a repair on your wallet. In the debug window under Help type “repairwallet” or “checkwallet” (LiteDoge Wallet> Help> Debug window> Console) Step 8:Enjoy : )
|
|
|
|
Abitcoinfuture
|
|
March 31, 2015, 04:39:45 AM |
|
The most important thing you need to know is that you must not delete your wallet.dat file! As long as you backup your current wallet.dat file, you will be safe.Here’s how to sync and repair your LiteDoge wallet:Step 1:Backup your wallet.dat file Copy your wallet.dat to a new location! Failure to do this will result in A LOSS OF ALL COINS Wallet locations: C:\Users\ %username% \AppData\Roaming\LiteDoge\wallet.datStep 2:Download the LiteDoge wallet from first page First page: https://bitcointalk.org/index.php?topic=985182.0Source: https://mega.co.nz/#!2VMTHT5T!BaU_KBPiJX0cyDq6xe6vFGi-B7C_0Sm9-VvluFCwEAQStep 3:Move the LiteDoge user data folder (rename to LiteDoge.old) Step 4:Install the new client Step 4a:Start the LiteDoge program briefly to create the LiteDoge data folder (otherwise theres nowhere to put the backed up wallet.dat). Step 5:Replace the new wallet.dat with your backed up version Step 6:Run the wallet and wait the blockchain to resync. (Failed resync? => "LiteDoge.conf" with latest addnodes at C:\Users\ %username% \AppData\Roaming\LiteDoge\ or just copy "LiteDoge.conf" from your "Step 3" renamed folder "LiteDoge.old" ) Step 7:Run a repair on your wallet. In the debug window under Help type “repairwallet” or “checkwallet” (LiteDoge Wallet> Help> Debug window> Console) Step 8:Enjoy : ) I think we all did this but maybe the repair or check wallet commands will help me, I will let you know, I will also try a 3rd time to delete everything in roaming I am very experienced in altcoin and wallet issues this one is just so damn repetitive and without an actual wallet update ppl are trying to basically trick the 1.0.0.1 version into working for them. Needless to say a few million of my coins are not in my wallet even though they should be, nearly 5 million doge is actually missing from all this mishaps and me finding blocks incorrectly.
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
March 31, 2015, 04:51:07 AM |
|
I think we all did this but maybe the repair or check wallet commands will help me, I will let you know, I will also try a 3rd time to delete everything in roaming I am very experienced in altcoin and wallet issues this one is just so damn repetitive and without an actual wallet update ppl are trying to basically trick the 1.0.0.1 version into working for them. Needless to say a few million of my coins are not in my wallet even though they should be, nearly 5 million doge is actually missing from all this mishaps and me finding blocks incorrectly. [/quote]
I found this on another thread.. try this out..
"Now, make sure you back up the old wallet before doing any of this.
1/ Reload the client
2/ Go into the console and type "dumpprivkey yourlitedogeaddress" where litedogeaddress is the address that supposedly holds any coins.
3/ Repeat 2 for every litedoge address that is supposed to contain your coins.
Store these keys somewhere safe. If you lose the keys you will lose your coins forever.
When you have stored these keys, rename your wallet.dat to wallet.old, make sure you do NOT delete it. The inventor of Bitcoin himself advised that you should NEVER delete a wallet.
Reload the client. Your balance will be zero since Litedoge-QT will create a new wallet.dat that it will then work with.
You can then rebuild the wallet by going into the console and typing "importprivkey 5YourPrivateKey" where 5YourPrivateKey is the private key that I mentioned above, in the case of more than 1 private key, repeat the same command until all the keys are imported into the wallet.
If your old wallet is badly corrupted, you may need to ask someone more knowledgeable than me, if the above steps do not work for you"
Best regards d57heinz
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
|