|
heavensopen
|
 |
June 01, 2015, 12:02:34 PM |
|
remove your foking sell walls! Don't bother, for them it is a lose either way 1) Or they sell too low > 3 Satoshi, while LiteDoge is worth much more 2) Or they sell even lower because they run out of patience  Either way the sell wall will be gone eventually, meanwhile we can finish the hi pos/new wallet. BTW check buy support, more buys then sells... LiteDoge is here to stay would you like to see a billion +something added to bittrex today? you wouldn't worry, huh? |
|
|
|
|
aquitasIJ (OP)
Member
 Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 12:16:02 PM |
|
remove your foking sell walls! Don't bother, for them it is a lose either way 1) Or they sell too low > 3 Satoshi, while LiteDoge is worth much more 2) Or they sell even lower because they run out of patience Either way the sell wall will be gone eventually, meanwhile we can finish the hi pos/new wallet. BTW check buy support, more buys then sells... LiteDoge is here to stay would you like to see a billion +something added to bittrex today? you wouldn't worry, huh? i don't understand this when do good development or any good things happen = price crash and big sell walls happen to make it impossible to rise. looks like someone with alot of money has something against this coin like he hates it or something. |
|
|
|
|
|
heavensopen
|
|
June 01, 2015, 12:17:51 PM |
|
It was slow with the old wallet too.
I'll find the cause of this in the future.
Having some problems with the wallet. Been trying to make it into a masternode.. And now I got closer to getting it done. The only problem I have now is that masternode start commend gives me an error. "Not capable masternode: Could not connect to IPADDRESS:17014" Any suggestions? try putting right ports That is the right port??? 17014 this is how my litedoge.conf looks like rpcuser=REPLACEME rpcpassword=REPLACEMEALSO rpcallowip=127.0.0.1 rpcport=17015 server=1 listen=1 staking=0 port=17014 masternode=1 masternodeaddr=REPLACEME:17014 masternodeprivkey=REPLACEME and masternode is working. are you sure you have your correct IP? my conf - and it is not working: rpcallowip=127.0.0.1 rpcuser=****** rpcpassword=******* rpcport=17015 server=1 daemon=1 listen=1 staking=0 port=17014 masternodeaddr=*******:17014 masternode=1 masternodeprivkey=******** addnode=93.157.4.11 addnode=91.121.6.19 addnode=183.91.4.3 yes, IP is correct and the privkey belongs to collateral address with the 5M ldoge (in one transaction only) |
|
|
|
|
aquitasIJ (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 12:25:24 PM |
|
It was slow with the old wallet too.
I'll find the cause of this in the future.
Having some problems with the wallet. Been trying to make it into a masternode.. And now I got closer to getting it done. The only problem I have now is that masternode start commend gives me an error. "Not capable masternode: Could not connect to IPADDRESS:17014" Any suggestions? try putting right ports That is the right port??? 17014 this is how my litedoge.conf looks like rpcuser=REPLACEME rpcpassword=REPLACEMEALSO rpcallowip=127.0.0.1 rpcport=17015 server=1 listen=1 staking=0 port=17014 masternode=1 masternodeaddr=REPLACEME:17014 masternodeprivkey=REPLACEME and masternode is working. are you sure you have your correct IP? my conf - and it is not working: rpcallowip=127.0.0.1 rpcuser=****** rpcpassword=******* rpcport=17015 server=1 daemon=1 listen=1 staking=0 port=17014 masternodeaddr=*******:17014 masternode=1 masternodeprivkey=******** addnode=93.157.4.11 addnode=91.121.6.19 addnode=183.91.4.3 yes, IP is correct and the privkey belongs to collateral address with the 5M ldoge (in one transaction only) did you put the masternode private key, not the private key for the address? are you sure you can connect to port? and thats your ip? remove those addnodes also you don't need them. are you sure your sure your wallet is fully unlocked? on my vps making a masternode worked. also 2 other people made one. |
|
|
|
|
|
heavensopen
|
|
June 01, 2015, 12:25:51 PM |
|
remove your foking sell walls! Don't bother, for them it is a lose either way 1) Or they sell too low > 3 Satoshi, while LiteDoge is worth much more 2) Or they sell even lower because they run out of patience Either way the sell wall will be gone eventually, meanwhile we can finish the hi pos/new wallet. BTW check buy support, more buys then sells... LiteDoge is here to stay would you like to see a billion +something added to bittrex today? you wouldn't worry, huh? i don't understand this when do good development or any good things happen = price crash and big sell walls happen to make it impossible to rise. looks like someone with alot of money has something against this coin like he hates it or something. Dev, I have invested in this coin, so I would be an idiot to hate it I will only tell you what happened recently with another coin and you can think if this is a similar situation: Recently a coin moved from POW to POS. All happened very smoothly, no forks at all, in both stages. Rewards seemed nice too. But, there was a slight problem: some people with a lot of coins started acting like they own it. No one was "allowed" to raise another voice and disagree with anything, he was automatically accused as a "FUD" and a liar. You weren't even able to say that you are not getting the POS rewards you should, according to the coins you were staking. And when masternodes started appearing, there were only a bunch of people close to dev that were able to setup a masternode. What happened is that the price crashed by 95% and never recovered. And there is no interest in this coin anymore, other than the interest the few people who were around dev are showing. Does this ring a bell? |
|
|
|
|
aquitasIJ (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 12:29:44 PM |
|
remove your foking sell walls! Don't bother, for them it is a lose either way 1) Or they sell too low > 3 Satoshi, while LiteDoge is worth much more 2) Or they sell even lower because they run out of patience Either way the sell wall will be gone eventually, meanwhile we can finish the hi pos/new wallet. BTW check buy support, more buys then sells... LiteDoge is here to stay would you like to see a billion +something added to bittrex today? you wouldn't worry, huh? i don't understand this when do good development or any good things happen = price crash and big sell walls happen to make it impossible to rise. looks like someone with alot of money has something against this coin like he hates it or something. Dev, I have invested in this coin, so I would be an idiot to hate it I will only tell you what happened recently with another coin and you can think if this is a similar situation: Recently a coin moved from POW to POS. All happened very smoothly, no forks at all, in both stages. Rewards seemed nice too. But, there was a slight problem: some people with a lot of coins started acting like they own it. No one was "allowed" to raise another voice and disagree with anything, he was automatically accused as a "FUD" and a liar. You weren't even able to say that you are not getting the POS rewards you should, according to the coins you were staking. And when masternodes started appearing, there were only a bunch of people close to dev that were able to setup a masternode. What happened is that the price crashed by 95% and never recovered. And there is no interest in this coin anymore, other than the interest the few people who were around dev are showing. Does this ring a bell? no it doesn't ring a bell. also i don't know any of the people who made the other 2 masternodes on the network. making a masternode in litedoge is the same way as making a masternode in dash and crave. anyone can do it if they have 5 million litedoge. |
|
|
|
|
|
heavensopen
|
|
June 01, 2015, 12:30:33 PM |
|
my conf - and it is not working:
rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*******
rpcport=17015
server=1
daemon=1
listen=1
staking=0
port=17014
masternodeaddr=*******:17014
masternode=1
masternodeprivkey=********
addnode=93.157.4.11
addnode=91.121.6.19
addnode=183.91.4.3
yes, IP is correct
and the privkey belongs to collateral address with the 5M ldoge (in one transaction only)
did you put the masternode private key, not the private key for the address? are you sure you can connect to port? and thats your ip? remove those addnodes also you don't need them. are you sure your sure your wallet is fully unlocked? on my vps making a masternode worked. also 2 other people made one. *sighs* yes, the privkey is the mastenode's privkey - not it's address (i know the difference) I have opened ports 17014 and 17015 to my router just to be sure and disabled firewalls completely I am even forwarding those ports to the specific machine I want to run the masternode on ok, I will remove the addnodes but this won't solve the problem and my wallet is unlocked, I actually unlock it before starting the masternode. Unless you mean that the wallet must remain completely unlocked and unencrypted at all times is this the problem? |
|
|
|
|
aquitasIJ (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 12:32:50 PM |
|
my conf - and it is not working:
rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*******
rpcport=17015
server=1
daemon=1
listen=1
staking=0
port=17014
masternodeaddr=*******:17014
masternode=1
masternodeprivkey=********
addnode=93.157.4.11
addnode=91.121.6.19
addnode=183.91.4.3
yes, IP is correct
and the privkey belongs to collateral address with the 5M ldoge (in one transaction only)
did you put the masternode private key, not the private key for the address? are you sure you can connect to port? and thats your ip? remove those addnodes also you don't need them. are you sure your sure your wallet is fully unlocked? on my vps making a masternode worked. also 2 other people made one. *sighs* yes, the privkey is the mastenode's privkey - not it's address (i know the difference) I have opened ports 17014 and 17015 to my router just to be sure and disabled firewalls completely I am even forwarding those ports to the specific machine I want to run the masternode on ok, I will remove the addnodes but this won't solve the problem and my wallet is unlocked, I actually unlock it before starting the masternode. Unless you mean that the wallet must remain completely unlocked and unencrypted at all times is this the problem? there is a difference between the masternode private key and the masternode address's private key get it from the get config option in the masternode tab. |
|
|
|
|
|
heavensopen
|
|
June 01, 2015, 12:36:56 PM |
|
my conf - and it is not working:
rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*******
rpcport=17015
server=1
daemon=1
listen=1
staking=0
port=17014
masternodeaddr=*******:17014
masternode=1
masternodeprivkey=********
addnode=93.157.4.11
addnode=91.121.6.19
addnode=183.91.4.3
yes, IP is correct
and the privkey belongs to collateral address with the 5M ldoge (in one transaction only)
did you put the masternode private key, not the private key for the address? are you sure you can connect to port? and thats your ip? remove those addnodes also you don't need them. are you sure your sure your wallet is fully unlocked? on my vps making a masternode worked. also 2 other people made one. *sighs* yes, the privkey is the mastenode's privkey - not it's address (i know the difference) I have opened ports 17014 and 17015 to my router just to be sure and disabled firewalls completely I am even forwarding those ports to the specific machine I want to run the masternode on ok, I will remove the addnodes but this won't solve the problem and my wallet is unlocked, I actually unlock it before starting the masternode. Unless you mean that the wallet must remain completely unlocked and unencrypted at all times is this the problem? there is a difference between the masternode private key and the masternode address's private key get it from the get config option in the masternode tab. This is what I did actually but, to be sure, I've run the command dumpprivkey [address] to be sure it is different (and to keep it backed up) |
|
|
|
|
aquitasIJ (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 12:46:18 PM |
|
my conf - and it is not working:
rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*******
rpcport=17015
server=1
daemon=1
listen=1
staking=0
port=17014
masternodeaddr=*******:17014
masternode=1
masternodeprivkey=********
addnode=93.157.4.11
addnode=91.121.6.19
addnode=183.91.4.3
yes, IP is correct
and the privkey belongs to collateral address with the 5M ldoge (in one transaction only)
did you put the masternode private key, not the private key for the address? are you sure you can connect to port? and thats your ip? remove those addnodes also you don't need them. are you sure your sure your wallet is fully unlocked? on my vps making a masternode worked. also 2 other people made one. *sighs* yes, the privkey is the mastenode's privkey - not it's address (i know the difference) I have opened ports 17014 and 17015 to my router just to be sure and disabled firewalls completely I am even forwarding those ports to the specific machine I want to run the masternode on ok, I will remove the addnodes but this won't solve the problem and my wallet is unlocked, I actually unlock it before starting the masternode. Unless you mean that the wallet must remain completely unlocked and unencrypted at all times is this the problem? there is a difference between the masternode private key and the masternode address's private key get it from the get config option in the masternode tab. This is what I did actually but, to be sure, I've run the command dumpprivkey [address] to be sure it is different (and to keep it backed up) here is what i did to make a masternode step by step on my vps first rent a linux ubuntu 14.04 vps then on my computer i created a masternode get config on my computer get config and enter the vps IP address in it when creating it. install the deps and secp256k1 for compiling on the vps compile the daemon strip the daemon cp the daemon to /usr/local/bin cd cd .litedoge nano litedoge.conf put the masternode config in the litedoge.conf save and exit cd into /usr/local/bin start the wallet ./litedoged then get the actaul private key of the address and import it in the wallet then stop the wallet ./litedoged stop then start the wallet ./litedoged then send 5 million litedoge to the masternode address then wait for fully confirmed then typed ./litedoged masternode start then it said "masternode started remotely" then it started getting payments. |
|
|
|
|
|
heavensopen
|
|
June 01, 2015, 12:51:38 PM |
|
my conf - and it is not working:
rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*******
rpcport=17015
server=1
daemon=1
listen=1
staking=0
port=17014
masternodeaddr=*******:17014
masternode=1
masternodeprivkey=********
addnode=93.157.4.11
addnode=91.121.6.19
addnode=183.91.4.3
yes, IP is correct
and the privkey belongs to collateral address with the 5M ldoge (in one transaction only)
did you put the masternode private key, not the private key for the address? are you sure you can connect to port? and thats your ip? remove those addnodes also you don't need them. are you sure your sure your wallet is fully unlocked? on my vps making a masternode worked. also 2 other people made one. *sighs* yes, the privkey is the mastenode's privkey - not it's address (i know the difference) I have opened ports 17014 and 17015 to my router just to be sure and disabled firewalls completely I am even forwarding those ports to the specific machine I want to run the masternode on ok, I will remove the addnodes but this won't solve the problem and my wallet is unlocked, I actually unlock it before starting the masternode. Unless you mean that the wallet must remain completely unlocked and unencrypted at all times is this the problem? there is a difference between the masternode private key and the masternode address's private key get it from the get config option in the masternode tab. This is what I did actually but, to be sure, I've run the command dumpprivkey [address] to be sure it is different (and to keep it backed up) here is what i did to make a masternode step by step first rent a linux ubuntu 14.04 VPS install the deps and secp256k1 for compiling compile the daemon strip the daemon cp the daemon to /usr/local/bin cd cd .litedoge nano litedoge.conf put the masternode config in the litedoge.conf save and exit cd into /usr/local/bin start the wallet ./litedoged then get the actaul private key of the address and import it in the wallet then stop the wallet ./litedoged stop then start the wallet ./litedoged then send 5 million litedoge to the masternode address then wait for fully confirmed then typed ./litedoged masternode start then it said "masternode started remotely" then it started getting payments. I am trying to setup a masternode on a windows wallet but, this would be my next question, I have a few VPS's used for hosting purposes and I have shell access maybe I can setup a couple of masternodes there too back to the problem, this is CRAVE's config: rpcallowip=127.0.0.1
rpcuser=MAKEUPYOUROWNUSERNAME
rpcpassword=MAKEUPYOUROWNPASSWORD
rpcport=MAKEUPYOUROWNPORT
server=1
daemon=1
listen=1
staking=0
port=9999
masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMANDand I notice a similarity in "Put your name of your masternode as the Alias and put your IP with :9999 next to it. so for example xxx.xxx.xxx.xxx:9999"I asked earlier if the port should be 9999 (because I knew CRAVE uses it) instead of 17014 - but no one answered |
|
|
|
|
Hamuki
Legendary
Offline
Activity: 1022
Merit: 1000
|
|
June 01, 2015, 12:54:03 PM |
|
I sent my Masternode wallet 5 million coins and its just stuck in "Amount and Rounds"
"5.000.000 Ldoge / 2 Rounds"
How do I get that Ldoge back?
|
|
|
|
aquitasIJ (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 12:55:52 PM |
|
my conf - and it is not working:
rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*******
rpcport=17015
server=1
daemon=1
listen=1
staking=0
port=17014
masternodeaddr=*******:17014
masternode=1
masternodeprivkey=********
addnode=93.157.4.11
addnode=91.121.6.19
addnode=183.91.4.3
yes, IP is correct
and the privkey belongs to collateral address with the 5M ldoge (in one transaction only)
did you put the masternode private key, not the private key for the address? are you sure you can connect to port? and thats your ip? remove those addnodes also you don't need them. are you sure your sure your wallet is fully unlocked? on my vps making a masternode worked. also 2 other people made one. *sighs* yes, the privkey is the mastenode's privkey - not it's address (i know the difference) I have opened ports 17014 and 17015 to my router just to be sure and disabled firewalls completely I am even forwarding those ports to the specific machine I want to run the masternode on ok, I will remove the addnodes but this won't solve the problem and my wallet is unlocked, I actually unlock it before starting the masternode. Unless you mean that the wallet must remain completely unlocked and unencrypted at all times is this the problem? there is a difference between the masternode private key and the masternode address's private key get it from the get config option in the masternode tab. This is what I did actually but, to be sure, I've run the command dumpprivkey [address] to be sure it is different (and to keep it backed up) here is what i did to make a masternode step by step on my vps first rent a linux ubuntu 14.04 vps then on my computer i created a masternode get config on my computer get config and enter the vps IP address in it when creating it. install the deps and secp256k1 for compiling on the vps compile the daemon strip the daemon cp the daemon to /usr/local/bin cd cd .litedoge nano litedoge.conf put the masternode config in the litedoge.conf save and exit cd into /usr/local/bin start the wallet ./litedoged then get the actaul private key of the address and import it in the wallet then stop the wallet ./litedoged stop then start the wallet ./litedoged then send 5 million litedoge to the masternode address then wait for fully confirmed then typed ./litedoged masternode start then it said "masternode started remotely" then it started getting payments. I am trying to setup a masternode on a windows wallet but, this would be my next question, I have a few VPS's used for hosting purposes and I have shell access maybe I can setup a couple of masternodes there too back to the problem, this is CRAVE's config: rpcallowip=127.0.0.1
rpcuser=MAKEUPYOUROWNUSERNAME
rpcpassword=MAKEUPYOUROWNPASSWORD
rpcport=MAKEUPYOUROWNPORT
server=1
daemon=1
listen=1
staking=0
port=9999
masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMANDand I notice a similarity in "Put your name of your masternode as the Alias and put your IP with :9999 next to it. so for example xxx.xxx.xxx.xxx:9999"I asked earlier if the port should be 9999 (because I knew CRAVE uses it) instead of 17014 - but no one answered you can use any port you want the port 17014 and the rpc port 17015 works yes try to make them on your vps. |
|
|
|
|
aquitasIJ (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 12:56:59 PM |
|
I sent my Masternode wallet 5 million coins and its just stuck in "Amount and Rounds"
"5.000.000 Ldoge / 2 Rounds"
How do I get that Ldoge back?
that means they are being mixed by darksend since you pressed on "darksend start". simply press on "darksend stop". |
|
|
|
|
|
heavensopen
|
|
June 01, 2015, 12:59:08 PM |
|
my conf - and it is not working:
rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*******
rpcport=17015
server=1
daemon=1
listen=1
staking=0
port=17014
masternodeaddr=*******:17014
masternode=1
masternodeprivkey=********
addnode=93.157.4.11
addnode=91.121.6.19
addnode=183.91.4.3
yes, IP is correct
and the privkey belongs to collateral address with the 5M ldoge (in one transaction only)
did you put the masternode private key, not the private key for the address? are you sure you can connect to port? and thats your ip? remove those addnodes also you don't need them. are you sure your sure your wallet is fully unlocked? on my vps making a masternode worked. also 2 other people made one. *sighs* yes, the privkey is the mastenode's privkey - not it's address (i know the difference) I have opened ports 17014 and 17015 to my router just to be sure and disabled firewalls completely I am even forwarding those ports to the specific machine I want to run the masternode on ok, I will remove the addnodes but this won't solve the problem and my wallet is unlocked, I actually unlock it before starting the masternode. Unless you mean that the wallet must remain completely unlocked and unencrypted at all times is this the problem? there is a difference between the masternode private key and the masternode address's private key get it from the get config option in the masternode tab. This is what I did actually but, to be sure, I've run the command dumpprivkey [address] to be sure it is different (and to keep it backed up) here is what i did to make a masternode step by step on my vps first rent a linux ubuntu 14.04 vps then on my computer i created a masternode get config on my computer get config and enter the vps IP address in it when creating it. install the deps and secp256k1 for compiling on the vps compile the daemon strip the daemon cp the daemon to /usr/local/bin cd cd .litedoge nano litedoge.conf put the masternode config in the litedoge.conf save and exit cd into /usr/local/bin start the wallet ./litedoged then get the actaul private key of the address and import it in the wallet then stop the wallet ./litedoged stop then start the wallet ./litedoged then send 5 million litedoge to the masternode address then wait for fully confirmed then typed ./litedoged masternode start then it said "masternode started remotely" then it started getting payments. I am trying to setup a masternode on a windows wallet but, this would be my next question, I have a few VPS's used for hosting purposes and I have shell access maybe I can setup a couple of masternodes there too back to the problem, this is CRAVE's config: rpcallowip=127.0.0.1
rpcuser=MAKEUPYOUROWNUSERNAME
rpcpassword=MAKEUPYOUROWNPASSWORD
rpcport=MAKEUPYOUROWNPORT
server=1
daemon=1
listen=1
staking=0
port=9999
masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMANDand I notice a similarity in "Put your name of your masternode as the Alias and put your IP with :9999 next to it. so for example xxx.xxx.xxx.xxx:9999"I asked earlier if the port should be 9999 (because I knew CRAVE uses it) instead of 17014 - but no one answered you can use any port you want the port 17014 and the rpc port 17015 works yes try to make them on your vps. yes, but the windows masternode problem is still unsolved.. we don't know why it doesn't work? |
|
|
|
|
aquitasIJ (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 01:07:30 PM |
|
yes, but the windows masternode problem is still unsolved..
we don't know why it doesn't work?
it does work on windows though |
|
|
|
|
Hamuki
Legendary
Offline
Activity: 1022
Merit: 1000
|
|
June 01, 2015, 01:08:01 PM |
|
I sent my Masternode wallet 5 million coins and its just stuck in "Amount and Rounds"
"5.000.000 Ldoge / 2 Rounds"
How do I get that Ldoge back?
that means they are being mixed by darksend since you pressed on "darksend start". simply press on "darksend stop". Never pressed on it. And I can only press start, and not stop. EDIT: Now they just popped up into my wallet as normal coins. Will see if I can get the masternode stuff to work. It cant get to my IP address.. That is the problem I have atm. EDIT2: Windows User here. |
|
|
|
aquitasIJ (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
June 01, 2015, 01:10:24 PM |
|
I sent my Masternode wallet 5 million coins and its just stuck in "Amount and Rounds"
"5.000.000 Ldoge / 2 Rounds"
How do I get that Ldoge back?
that means they are being mixed by darksend since you pressed on "darksend start". simply press on "darksend stop". Never pressed on it. And I can only press start, and not stop. then it shouldn't be stuck in mixing if you didn't do anything to start the darksend mixing. are you sure its even stuck? |
|
|
|
|
|
heavensopen
|
|
June 01, 2015, 01:20:27 PM |
|
I sent my Masternode wallet 5 million coins and its just stuck in "Amount and Rounds"
"5.000.000 Ldoge / 2 Rounds"
How do I get that Ldoge back?
that means they are being mixed by darksend since you pressed on "darksend start". simply press on "darksend stop". Never pressed on it. And I can only press start, and not stop. then it shouldn't be stuck in mixing if you didn't do anything to start the darksend mixing. are you sure its even stuck? It is not, he is reading the "amount and rounds" not the "darksend balance" my wallet reports the same and the coins are in masternode's address |
|
|
|
|
|
heavensopen
|
|
June 01, 2015, 01:22:32 PM |
|
yes, but the windows masternode problem is still unsolved..
we don't know why it doesn't work?
it does work on windows though maybe, but this is making me feel like a retard.... I don't like to have no answers and just try to bypass a problem |
|
|
|
|
|
