Looks sweet, I'll be installing this alongside farmcp!
|
|
|
I figured it out. Essentially all these PSUs which *claim* to be able to put out 504w on the 12v rail are not even capable of putting out 300w, wow.
Returned them all and picked up some higher quality ones.
|
|
|
I have (7) 6 5 4 3 brand new H81 BTC Pros for sale. I'm asking 0.22 BTC shipped for them. I will take BTC, LTC, DOGE. I will of course escrow upon request with a trusted community member, you pay the fees. Shipping is USA only.
|
|
|
So, I'm completely at a loss here. I have 18 GPUs mining away here with no problems at all, except this damn special one.
I set him at intensity of "11" and all is well, except a garbage mining rate of like 110khs on a 7950.
I set him at intensity of "12" and BAM, the card shuts down, the PSU powers off, and must be unplugged before it will power on again. I've never seen anything like it.
This is a 650w PSU with 512w on the 12v rail, I have tried FIVE different power supplies and TWO different motherboards, and yet this problem persists. Has anyone heard of this?
For reference, I *am* doing scrypt mining, however, this issues happens just the same if I switch to bitcoin mining, therefore what I am mining/profitability is irrelevant.
|
|
|
I looked, but I don't see a price listed for the 12MHS?
|
|
|
Okay, so I've shot this dude a PM.
I read this whole damn thread, lol.
So, the LA6M looks like it might get 10MHs on the new firmware? That's awesome, hoping to be able to buy one ASAP!
|
|
|
[bla bla bla] this is all that matters: Seriously good stuff there man, I think that tells it all way more than any other BS people throw out.
|
|
|
Ebay prices are allways outrageous... Sell it on ebay if you want that much. Just don't come crying when someone bricks it or scams you and then wants a refund which you are obligated to give them due to the 45 day no questions asked warranty you give on every item you sell. Where did you get that? Any sources? Err that's standard eBay rules.. Paypal can give them their money back within 45 days.
|
|
|
I have one available as well if OP sells his.
|
|
|
Does this need to be run on a miner, or can it be installed on any linux machine on the same network as the miners?
I've got 3 instances of it running on my monitoring VM - just needs to be able to access the JSON RPC of cgminer.
|
|
|
This looks awesome! Trying it out now!
|
|
|
Still waiting for my withdraw on the 18th of Jan to confirm, can't believe how bad you guys have become
|
|
|
Is there a problem with the system?
I switched all my miners over to the DOGE port, stratum+tcp://us-east.multipool.us:3352, miners hashing away happily, waited over 45 mins, nothing showing in my dash at all. What gives?
|
|
|
Hi shibes. I'm looking for large hashers who want a 24 hour contract to mine @ https://pool.chunky.ms/doge/With the recent difficulty increase, our block average has gone up to where it's kind of a pain. If you're interested, shoot me a PM or hop on irc.freenode.net in #chunky Thanks. Define large hashers..
|
|
|
Hey all. Sorry if I missed it some where in this thread. Went back 10 pages and did not see it.
Is the "My hashrate" number correct? Seems stable at 3.5mh/s, but I should be closer to 4.7Mh/s. I've spent several days making sure all of my miners are up (have been for at least 3 solid days) and that the rejected/stale numbers look good. Internet connection is good at both locations they are at. If it is just listed wrong, then I am probably fine. If it is listed right, then I've got some more work to do. /scratcheshead
I've found this number to be highly variable and dependent on the current time mining the current coin, the round length, and the difficult. It's pretty hard for them to calculate your actual number, I really just ignore it unless we've been in the current round for 30+ mins stable.
|
|
|
Hey aTriz or any other Hashcow employee, could I get a small update please? I read back a few pages but all I'm seeing is trolls circlejerking. I have 7+ MH/s mining with you guys for the past 48 hours or so (I've recently switched back to you after your hack) and I'm only seeing a confirmed balance of 0.02ish. Is this due to the newer fast retargeting coins and their difficulty/confirmation problems that I read about? Or is this stat just lagging and not fully restored yet? Your pool was fantastic before the hack and I've been itching to get back on here because your pool is the best I've mined at; I have been seriously impressed with the way you all handled it and have certainly earned my trust. I'm using cgminer 3.3.1 on half of my machines and 3.7.2 recompiled with the 5 minute stability code removed, so I know I'm on your server whenever it is up. I'm also on a high-bandwidth low-latency fiber connection. Any light you could shed on this would be most appreciated, I will have 10MHs online soon and want to ensure I can actually pay it off at some point I'm at a similar hashpower and have received similar payouts. Up to a few days ago, I was mining with middlecoin and making about .06/day consistently. There definitely seems to be a problem with hashcows. Thanks for that, guess I'll be switching back to middlecoin for now, they're having a good week
|
|
|
Hey aTriz or any other Hashcow employee, could I get a small update please? I read back a few pages but all I'm seeing is trolls circlejerking. I have 7+ MH/s mining with you guys for the past 48 hours or so (I've recently switched back to you after your hack) and I'm only seeing a confirmed balance of 0.02ish. Is this due to the newer fast retargeting coins and their difficulty/confirmation problems that I read about? Or is this stat just lagging and not fully restored yet? Your pool was fantastic before the hack and I've been itching to get back on here because your pool is the best I've mined at; I have been seriously impressed with the way you all handled it and have certainly earned my trust. I'm using cgminer 3.3.1 on half of my machines and 3.7.2 recompiled with the 5 minute stability code removed, so I know I'm on your server whenever it is up. I'm also on a high-bandwidth low-latency fiber connection. Any light you could shed on this would be most appreciated, I will have 10MHs online soon and want to ensure I can actually pay it off at some point
|
|
|
|