Soliciting suggestions on what to do with the 10 million rows in the WDC confirmed rewards table.
Thinking about just dumping it. Does anyone care about WDC block data from two months ago or more? MNC and DGC are getting up there, too.
|
|
|
why do i get reject ratio over 5% when i mine on multipool ? any idea ?
We're mining Worldcoin right now, when we're on a slower coin you should get a lower reject rate.
|
|
|
This may have been reported before, so ignore if it has....
On pool2, custom diff settings aren't being used, it is defaulting to 64 for me.
EDIT: never mind, I see that you had to disable it.
I don't see where this was mentioned, why was it disabled on the beta pool? It shouldn't have been.. I'll take a look.
|
|
|
there are no data in account section ... any idea ?
oops! Should be better now.
|
|
|
Multipool CAP pool has been reopened, however I am requiring 200 confirmations before payout. The Multiport will not mine CAP until all issues have been addressed.
|
|
|
The CAP pool has been re-enabled, but the multiport will not mine it until the network is stable. For now it's considered mine at your own risk, as your blocks will not be paid if they are orphaned by a fork.
Payout confirmations are set to 200.
|
|
|
Effective immediately, there is no longer a minimum on-demand withdrawal threshold. However, the user pays the network transaction fees for withdrawals less than 1 coin.
Automated withdrawal minimum is still 1 coin.
|
|
|
I think I've finally tracked down this issue. Please let me know if you see an improvement.
Will do, thanks. Will you be enabling diff selection on the EU servers once it is done on the US servers? Interested to have a play with this and see if it makes any difference. Great pool btw. I enabled it across all of the servers at one point, and some people had issues submitting shares. So I disabled it. I'd need someone who was having issues at the time to help me debug in order to determine the cause and fix the code before I can enable it on the rest of the servers.
|
|
|
Thanks, still getting used to navigating this forum and missed yours and Aurum's replies. I am getting a lot of disconnects on the EU server and not just when switching coins. Not sure if this is common: [2013-08-19 22:04:40] Accepted 8a2cb101 Diff 73/64 GPU 0 pool 0 [2013-08-19 22:05:50] Found block for pool 0! [2013-08-19 22:06:10] Stratum connection to pool 0 interrupted [2013-08-19 22:06:10] Lost 56 shares due to stratum disconnect on pool 0 [2013-08-19 22:07:10] Pool 0 stratum+tcp://pool1.eu.multipool.us:7777 not responding! [2013-08-19 22:07:10] Switching to pool 1 stratum+tcp://pool2.us.multipool.us:7777 [2013-08-19 22:07:18] Stratum from pool 1 detected new block [2013-08-19 22:07:21] Accepted d6c071b3 Diff 341/192 GPU 1 pool 1 [2013-08-19 22:07:25] Stratum from pool 1 detected new block [2013-08-19 22:07:29] Found block for pool 1! [2013-08-19 22:07:29] Accepted ca8b58dd Diff 36.6K/192 BLOCK! GPU 0 pool 1 I think I've finally tracked down this issue. Please let me know if you see an improvement.
|
|
|
Something funny is going on.. I'm restarting the db and the LTC pools right now. It seems like all the shares are making it into the DB, but not sure why the 10 minute hashrates are low.
|
|
|
CAP has been disabled for a while. The new client came out this morning, so I'll be compiling it shortly and I'll turn the CAP pool on after that. I'll re-enable CAP on the MP once it has been stable for a few days. If it forks again after that, I'll be leaning toward removing it permanently.
Is CAP re-enabled? Can we min it directly to test it out? It's currently still down. I will most likely re-enable the CAP pool tomorrow at or after 12PM EST when the old nodes are due to be disconnected from the network, assuming there are no major forks and I don't need to redownload the blockchain again. So I am guessing you pushed this back because they updated to 1.4.2, and the network is still struggling for stability? You guessed correctly. And also because I had downloaded the correct chain sometime yesterday and yet somehow still got on a fork, and got on another fork after I installed 1.4.2. We finally are on the "right" chain now. We'll see if this holds up for 24 hours.
|
|
|
$ bottlecapsd getpeerinfo|grep height "startingheight" : 80137, "startingheight" : 80137, "startingheight" : 80137, "startingheight" : 80137, "startingheight" : 80138, "startingheight" : 80139, "startingheight" : 80139, "startingheight" : 80139, "startingheight" : 80139, "startingheight" : 80115, "startingheight" : 80139, "startingheight" : 80141, "startingheight" : 78474, "startingheight" : 80145, "startingheight" : 80147, Block crawler is currently at 80137, so the above worries me.
|
|
|
Hi im the user of the same login in your pool, after almost one day to find a block , we have foun one, about half hour ago, but doesnt seem to account in my uncomfirmed rewards , the coin is nvc, is the second time it happens to me, Blocks are not scored until they reach 5 confirmations.
|
|
|
My rejects are running 50 to 70% !!!
On what coin? WDC?
|
|
|
Drive filled up on one of the servers.. Stuff's catching up now...
Last 2 days I'm seeing alot of invalid shares when switching over to WDC. It's not 1-2mins of invalid shares but more like 30+mins that's ALOT and can't afford losing 30mins everytime the pool switches to WDC. This will vaporise the advantage of a multi-pool. 10 Minute Hash Rate 1059 Kh/s Valid Round Shares Invalid Round Shares 1728 Your Efficiency 0% Est. Coins/Block 0 Est. Coins/Day 667.9481 Worker Uptime (last 24h) 05:55:12 (24.67%) It's always WDC?
|
|
|
I always avoided them simply because they were listed as being in Slovenia.
As it turns out to be, Slovenia is one of the most BTC friendly places, at the moment. I'm not worried about BTC friendliness as much as being able to actually get my money back if they go belly up.
|
|
|
When mining on multipool after about 24 hours my cg miner crashes and stops mining.
It is fine when mining on an individual coin via multipool and other pools. Do you think it could possibly be related to the the pool switching coins? If so any ideas on how to stop it crashing?
Are you on the latest version? I have no problems with 3.3.1. Some people in our thread have this problem as well, I believe they use cgwatcher to restart cgminer if it drops below a certain hashrate.
|
|
|
I always avoided them simply because they were listed as being in Slovenia.
Coinbase price is very close to Bitstamp and is headquartered in the US, so there is much more in the way of recourse if something goes wrong.
|
|
|
Drive filled up on one of the servers.. Stuff's catching up now...
|
|
|
|