The second batch is probably getting the tracking detail in the mail somewhere today?
We have the gridseed units in stock today, I am beginning dispatch tomorrow 6th March. I apologise for the delay as the Gridseed factory is very behind schedule. Another issue I am having is that 5-packs are beginning to be dispatch tomorrow but we have to wait until Friday 7th March for dispatch of 10-packs and more. Gridseed have shortage of controllers and those are being shipped to me tomorrow and I will receive them Friday. I apologise to all for the delay encountered. The next batch March 8 will beginning shipping on Monday March 10th now. I will update the post to reflect this. I will post photos of stock tomorrow and on Monday of the huge batch of units that we will have on hand. Cheers |
|
|
|
Am interested in a batch of 20, have sent pm. Awaiting your reply, thx  Replied PM, check inbox pls. |
|
|
|
sent pm as well
Replied pm, pelase check inbox |
|
|
|
atari02, just sent you a pm....thanks.
Replied... check PM |
|
|
|
Can I purchase a controller by itself or can anyone tell me if I can run my gridseed off my computer?
I can sell you a controller for $75. But shipping will be around $40, depending on location. Better to run of controller than computer due to reset scripts being on the controller. |
|
|
|
I'm interested in the 20 gridseed offer. will PM right away
PM sent |
|
|
|
You can only estimate the hashrate with your pool. I have 6 running and I see it from 1600-2300kh....works for me. They are running on the cpu miner, it's scrypt only, the cpu miner can't read the gridseeds hashrate. I haven't really found how to run them in dual mode without having the controller. Also, it's important to note each chip is 7w, not each gridseed. So the gridseed runs at about 35w on scrypt, plus about 10w for the fan, a lot of people remove the fans when they build fancy setups, I am not going to do that.I just opened up the pool I am mining on and it says about 1900kh with 6 gridseeds, as long as it doesn't say something like 500kh, I'm not too worried. This is true if you run the original version of Gridseeds CPUminer, which didn't disable the SHA256 cores in Scrypt-only mode. Crypto Mining Blog have a modified CPUminer available which disables the SHA256 cores, thus ensuring that each unit (including fan) consumes ~10W. Thanks for the link scryptographer. BTW, are you interested in more units? =) |
|
|
|
I just wanted to post 1 more picture for you guys. I was in batch 1. Mine are all running hashcows (a switchpool that jumps to most profitable at the time), and I would have to take a video, but it seems these switch and pick up the new stratum slightly faster than the gpus which is kind of nice. I have already mined, TIPS, POT, DOGE, DGB, and a ton of other scrypt coins. My setup is hot mess right now because I used to have 2 computers running 9 gpus on that contraption I built, but I sold one computer as the 6 gridseeds I have are faster than that computer with 7850s was. They sell 6ft, 12ft and 15ft usb to usb mini (don't buy micro) on tigerdirect for $2-$3 each. I just order 8 to be safe, 12ft cables, so I can move them away from the gpu rig and build them their own contraption. You can also buy long 12v 7a power cords (made for led lighting) on ebay for $10 each. I have a bunch of them on their way as well. I guess since I already bought the amount I needed, these power the gridseeds I have 1 gridseed running on one right now. http://www.ebay.com/itm/350626186462?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649If you don't get a controller, you have to run a separate instance of miner-d for each gridseed you have, not really too big of a deal.  Nice pic. I like your style. Don't worry, miner is even more ghetto. I used an upside down caged basket with cutouts on every side for access. |
|
|
|
Hello atari,
im from Romania and interested in buying 10x gridseed dualminers.
How mutch will cost shippment?
Thx
PM sent |
|
|
|
Mybe a dumb question but because of all of the topics about gridseed I don't know where to look for.
Can it mine alternative currency like Dogecoin ?
Thanks again!
Yes, you can mine all scrypt coins. |
|
|
|
Hey thanks for that. But does anyone have a working version of cgminer or bfgminer for this GS3355 units? I can offer 0.3BTC for a working cgminer or bfgminer (preferred) version. I am currently working on my own version of GS miners, similar to lightningAsic. It will be in English with more features. And users will not be locked out of their controller. I am still tossing up on whether to build this on the GS controller or Raspberry PI. I think Pi is the way to go though. |
|
|
|
I finally received my LA3M yesterday and got it up and running very quickly. However I'm just getting maximum around 3.5M, any idea how to get this higher and close to 5M which was what was originally stated by Jack.
I don't think you will get that speed. Has anyone got that speed for a stable consistent period? I think it was a marketing ploy. So sorry. When I boot up my miners, some of them are running at speeds of 600-800kh for 5 mins. But that's because the output is based on accepted shares. That is not the real long term speed. I can keep rebooting the miners until I get the reading I like and screenshot it. I have measured these thing. The best they can hash at is around 3.6-4.0mh at the miner. Pools will report lower due to rejected shares. Think about it, if Gridseed could have got better speeds out if it, they would have. Not leave it to a reseller to make a better firmware. Gridseed has a team of 20 people. How many works at LightningAsic? |
|
|
|
***** PRE-ORDER DISCOUNT FOR 10-PACKS (Shipping STARTS 8th March) *****
Pay by 4th March midnight
US$2,350
GMT +10 hours
Interested. Hope to get a 10 pack local on Monday or Tuesday and if those work I will want more. Please PM. Thanks! Cartman, PM me and give me your address and I will see what I can do for you. My pipeline is getting full. And it is a first come first serve basis. The earliest you can get it is dispatched by me from the 8th March. Now that stock is running low and in about another day I am going to close it and start on Batch #4 which will be March 15. Everything is shipped out from China, and the invoices are done whereby customers don't need to pay tax and the units will pass customs easy. We are very familiar with all import laws and taxes for most countries to be able to deal with it. Cheers At this price I would go for it. You still have my info? PM sent. Check inbox and reply with confirmation and I will allocate stock for you. Cheers Hey there left you a message. I think you sent me a bit more than the amount listed here. THanks. hey there bearsworth, sorry for the misunderstanding, it was always that sale price plus shipping and paypal fees (if using paypal). I understand if the price is not suitable for you, but at this price I am still the cheapest price around. |
|
|
|
Hi, Thanks for the setup guide. Donation sent!! |
|
|
|
***** PRE-ORDER DISCOUNT FOR 10-PACKS (Shipping STARTS 8th March) *****
Pay by 4th March midnight
US$2,350
GMT +10 hours
Interested. Hope to get a 10 pack local on Monday or Tuesday and if those work I will want more. Please PM. Thanks! Cartman, PM me and give me your address and I will see what I can do for you. My pipeline is getting full. And it is a first come first serve basis. The earliest you can get it is dispatched by me from the 8th March. Now that stock is running low and in about another day I am going to close it and start on Batch #4 which will be March 15. Everything is shipped out from China, and the invoices are done whereby customers don't need to pay tax and the units will pass customs easy. We are very familiar with all import laws and taxes for most countries to be able to deal with it. Cheers At this price I would go for it. You still have my info? PM sent. Check inbox and reply with confirmation and I will allocate stock for you. Cheers |
|
|
|
Please check your PM.
PM sent, check inbox |
|
|
|
Talk about overpriced hardware. Cheez not everyone is that desperate.
Oh right, you have 496 units of these in stock at $7,000. So you have $3.5m in stock. If you are going to lie about it make it more believable. Anyway, I can get the sale price closer to $5k And by the way I am in talks with the makers and they only have beta units atm. The real ones are only released on March 10. So don't BS =) |
|
|
|
***** PRE-ORDER DISCOUNT FOR 10-PACKS (Shipping STARTS 8th March) *****
Pay by 4th March midnight
US$2,350
GMT +10 hours
Interested. Hope to get a 10 pack local on Monday or Tuesday and if those work I will want more. Please PM. Thanks! Cartman, PM me and give me your address and I will see what I can do for you. My pipeline is getting full. And it is a first come first serve basis. The earliest you can get it is dispatched by me from the 8th March. Now that stock is running low and in about another day I am going to close it and start on Batch #4 which will be March 15. Everything is shipped out from China, and the invoices are done whereby customers don't need to pay tax and the units will pass customs easy. We are very familiar with all import laws and taxes for most countries to be able to deal with it. Cheers |
|
|
|
Will you be getting more in stock after the March 8th sale? Would love to get an order in, although I don't think I'll have funds cleared by that time. Next batch is March 15th. Cheers |
|
|
|
PM sent
PM replied. Check inbox |
|
|
|
|
Show Posts
