Maybe for someone more experienced in HashFlare,
If i invested 24k with reinvest option on and it is telling me that return on investment will be roughly 3 months my question is does it make more sense to eventually take a large portion out to start a new contract depending on the outlook of hashflare, or to let the complete contract play out?
I am new here guys thank you for the help.
These guy created a google sheet that help with your question https://www.reddit.com/r/hashflare/comments/7k6k38/i_made_an_upgraded_calculator_for_hashflare_with/I did a guide to help who wants invest in Hashflare: https://conquistarbitcoins.blogspot.com.br/2017/12/how-to-mine-bitcoin-in-cloud.htmlI have 8 months of experience using Hashflare, and I bought 50 TH/s during some months... now I’m in profit mode... in the last withdraw I got all the money that I invested. I didn’t reinvested nothing, always putting new money and of course I sold when the Bitcoin was high. |
|
|
|
Hello guys
When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.
Are this a bug in the program or do i something wrong?
My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12
When i OC with afterburner it work fine on all cards. But i want to use the miner to do it
You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu It does the same with this  -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12 I just try on another server but it dont work there :/ I have also try to put it into the config file -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 #-asm 0 But still only GPU0 there get the settings Try to put just one value for each parameter or specify just in some of them, example: -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12 Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam. This process works for me. Thanks for the replay but still no Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfeCard1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230Did you mod the bios? What version of claymore are you using? Try a different config for gpu1, just to test, like: -cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000 This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2 It gives the same :/ I use 10.2 and the 23aug driver too. And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again I think this is a normal behavior, only the led that in my case still on independent of the miner. The link that you share support Hynix and Samsung memories, I didn’t see for Micron, that is your card. There is a link to the Micron firmware in the comments section https://mega.nz/#F!oi4QERJb!CyJ8-6mNNe0NQApBL2vE0gSo, the next step in my opinion it's changing these configs direct in the bios using Polaris Editor... it's quite easy... I had to do that in some cards when I was using a old version of claymore. Look my 580 nitro micron gpu config in Polaris: https://ibb.co/dJ4KX6 |
|
|
|
|
I have this card... I’m using claymore v10.2 and blockchain drivers Aug 23.
The bios is modded and the best config that I did: cclock 1150 / mclock 2150 / 900 v
With this config in average I get 29 mh/s.
|
|
|
|
Hello guys
When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.
Are this a bug in the program or do i something wrong?
My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12
When i OC with afterburner it work fine on all cards. But i want to use the miner to do it
You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu It does the same with this -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12 I just try on another server but it dont work there :/ I have also try to put it into the config file -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 #-asm 0 But still only GPU0 there get the settings Try to put just one value for each parameter or specify just in some of them, example: -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12 Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam. This process works for me. Thanks for the replay but still no Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfeCard1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230Did you mod the bios? What version of claymore are you using? Try a different config for gpu1, just to test, like: -cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000 This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2 It gives the same :/ I use 10.2 and the 23aug driver too. And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again I think this is a normal behavior, only the led that in my case still on independent of the miner. The link that you share support Hynix and Samsung memories, I didn’t see for Micron, that is your card. |
|
|
|
Hello guys
When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.
Are this a bug in the program or do i something wrong?
My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12
When i OC with afterburner it work fine on all cards. But i want to use the miner to do it
You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu It does the same with this -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12 I just try on another server but it dont work there :/ I have also try to put it into the config file -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 #-asm 0 But still only GPU0 there get the settings Try to put just one value for each parameter or specify just in some of them, example: -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12 Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam. This process works for me. Thanks for the replay but still no Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfeCard1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230Did you mod the bios? What version of claymore are you using? Try a different config for gpu1, just to test, like: -cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000 This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2 |
|
|
|
Hello guys
When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.
Are this a bug in the program or do i something wrong?
My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12
When i OC with afterburner it work fine on all cards. But i want to use the miner to do it
You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu It does the same with this -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12 I just try on another server but it dont work there :/ I have also try to put it into the config file -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 #-asm 0 But still only GPU0 there get the settings Try to put just one value for each parameter or specify just in some of them, example: -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12 Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start again. This process works for me. |
|
|
|
|
These days I got the error 511 incorrect temperature and I solve changing the power supply of the riser.
I tried change the raiser and using the same energy plug unsuccess... only works when I changed the energy plug of the riser.
|
|
|
|
Hi,
I am having a hard time with my voltage setup on my second rig so any help would be great, I have the below setup.
Asrock H81 BTC Pro R2.0
6 x Sapphire RX480 Nitro+ 8GB
2 x EVGA 750 G2 PSU
All bios mods are running Ubermix 3.1 via PBE 1.6.4
It currently runs cards at 1100/2000 875/850 & a couple at 1050/2000 850/850
I am getting between 29.2MH/s & 29.5MH/s per card total of 175.5MH/s for entire rig.
Running WIN10PROx64, Claymore 10.1, using DAGFIX drivers mining ETH only, but it is pulling over 900w at the wall, using Wattman to control speeds etc. (Temps range from 57-62)
My rigs run relatively quiet, due to their locations, quiet enough the wife is happy to have them in the room and quiet enough you can hold a conversation next to them (Saves me having to turn on the heating)
I had this running at just under 800w a few weeks ago, but unable to reproduce how I did this, so any help would be great
Managed to reset everything and start again, now pulling 840w-845w. alot better than the 960w it was pulling. And managed to squeeze out another 1MH/s and lower temps a degree or 2 Not sure what happened overnight, but woke up to the rig going nuts, pulling 1150w, killed miner and restarted, now pulling 765w - 770w WTF? After a reboot its now pulling 900w - 920w erratically. Anyone have any ideas?? its getting frustrating, it can run for weeks stable as hell and poof overnight, no changes it just decides to throw a wobbly. My 7x RX470 rig has been running for months no issues (fingers crossed), so solid. But the RX480 rig, same OS, same CM, Same Drivers, Same PSU's etc does not. read my post here: https://bitcointalk.org/index.php?topic=1433925.msg26800863#msg26800863do not use blockchain drivers and use overdriven for gpu configs I’m using blockchain drivers, but to stable my rigs I need to open and close the miner program three or four times to get the correct speed and config. The process is: click in the claymore miner, waits until setting up all the Dag files, before start really mine, I close and repeat the process until the speed is ok. I have 3 rigs, 480 and 580 nitro 8gb, the most stable are the 580 nitro... when stabilize the rigs works for more than 40 hours. I’m using all the config commands of claymore to set the clock and voltage. |
|
|
|
|
These days I got the error 511 incorrect temperature and I solve changing the power supply of the riser.
I tried change the raiser and using the same energy plug unsuccess... only works when I changed the energy plug of the riser.
|
|
|
|
|
Hello guys... I do realize that Hashflare don’t pay all the block reward, they pay only the fix part, the fee transaction part they didn’t pay.
I saw in Btc.com that the block reward is almost 20 BTC per block, 12.5 fix and the 7.5 is the transaction fee.
Do you know if Genesis Mining pays?
|
|
|
|
Man, can't you just go on BTC.com and see what are the block rewards? https://btc.com/Yes, it is due to high fees, as you might know the fees are added to the mined blocks as reward for miners to confirm transactions. Tks man. It’s clear now. Now the block reward is extremely high and we are not receiving this from Hashflare. Anyone knows if other cloud mining companies do the same?. I read this site to understand how the transaction fee affect the block reward: https://www.bitcoinmining.com/bitcoin-mining-fees/ |
|
|
|
Cryptocompare calculator does not factor the corrent block reward and calculation is based on 12.5. Only CoinWarz calculator has the ability to factor the block reward, just put there 19 in block reward as that is the current average, from 16th december.
If you know someone with an ASIC just ask him how much he is doing currently per 1 TH/s of hashpower, you'll be surprised as you should be making more than before the difficulty rasies because of the high block reward.
Hummm I didn’t know about that, I was thinking that the block reward is fix, always. So, how the block reward is more than 12.5? Because the high fee per transaction? In this case I agree with you. |
|
|
|
Of course you cannot trust to any site like that, online mining services, I mean. Many sites like this one turned out to be scams, so don't invest your hard earned money into online mining. If they are giving some mining power for free use that like you can use their referral system and that can pay out for you, but do not invest your money. Good luck!
Ok, but I’m just telling my experience using their services in 8 months... and with some patience I was be able to get my money back and for now one I’m having only profit. Of course 8 months ago the crypto currencies world was different... and now the ROI is uncertain, because the bitcoin price and that they rise the price to buy hashpower. I’m using this BTC calculator: https://www.cryptocompare.com/mining/calculator/btc?HashingPower=1&HashingUnit=TH%2Fs&PowerConsumption=0&CostPerkWh=0 |
|
|
|
Hashflare.io does not instill confidence in its users at all. I have a bad feeling about this service now that they have a high minimum withdraw. Why can't their users just pay the higher fee and withdraw whenever they want? I hope they are implementing user-selectable fees.
Just for information, I was be able to withdraw my bitcoin balance yeasterday without a problem. The process took 3 hours. |
|
|
|
Still not clear if reinvestment amount will be considered as a new contract purchase which will last one year. Can anyone please clarify this?
Yes, every reinvestment is a contract of its own and will last about 365 days. I do not know this by experience, I read about somewhere else plus. Also I applied logic. Since the initial purchase is limited to a year also every purchase per reinvest must be limited to one year. Also there is this calculator I linked below. https://whatsmyip.com/hashflareYou can set your initial investment and the hashrate you got. I'm one of the people who tried first buying a little hashrate, then deciding several days later it is worth buying a decent amount of hashrate. The second purchase is stil pending. I recon the 14 days you have to wait for withdraw, after registering or setting/changing wallet adress also counts for purchases. It is nowhere clearly stated but many people who make their first purchase are getting through. And I am sitting here and presumably waiting for the 14 days period to end so my second purchase can start. Wrote a ticket and the stated time that I have to be patient for an answer is after christmas eve. Since I trust HF (do I have even a choice after making payment in BTC?) I planned to reinvest for about 4 to 6 months. Withdraving BTC to a trusted wallet when I can get initial investment plus 10%. The rest I'd just let sit there for the cummulative contracts to end and then decide wether I should reinvest. I like this calculator, so probably do some reinvestment is good... I don't think that reinvest all your balance it's the best choice, because it's too risk ... in some case I try to put new money to buy hashpower. If someone need help to invest in hashflare, I created this guide: https://conquistarbitcoins.blogspot.com.br/2017/12/how-to-mine-bitcoin-in-cloud.html |
|
|
|
Have you got the contract amount returned to you after you have invested on it. Keep investing on cloudmining is worst part of investing on mining platform. You will not get the returns after 6 months also but you are saying here in the 3 months of retuned is possible. Truely it is not possible. Try to buy some cards and start mining with the GPU rig. That will be profitable. Yes, I got it... but I didn't reinvest the BTC generated by mining, I always put new money to buy hash... and when the BTC reach a good price I transform in USD. As I only know Hashflare... what cloud mining do you invested and didn't have the ROI? |
|
|
|
Why not mixing it up?
Step 1: Get back your initial investment (if Hashflares calculation ist correct this should happen after 2.5 - 3 months)
Step 2: Cash out a set amount of winning (e.g. after another month)
Step 3: re-invest for one month to add to your mining capacity
Go back to step 2
This way you will realize winnings but also keep your mining running without new investments from scratch.
I made a guide with updated values... I still recommend them, but you have to be patient in some cases. See: http://conquistarbitcoins.blogspot.com.br/2017/12/how-to-mine-bitcoin-in-cloud.htmlROI today is about 4.5 months, but I'm hoping bitcoin will continue to grow. Been wondering on how did you able to calculate the roi for 4.5 months which i cant see this thing for it to be possible and even on 1 year contract you cant able to reach out roi this is why i dont really suggest to reinvest again your funds into Hashflare. If you are really eager on investing then only put up on the money that you can afford to lose .Just dont blame us if you lose money and dont tell us that we didnt warn you. I'm using their services for more than 8 months and I already had my ROI... ok, bitcoin difficulty is high nowadays, the TH/s price increased... but using the cryptocompare btc calculator will you see that the ROI will be less than 4.5 months... Look: https://www.cryptocompare.com/mining/calculator/btc?HashingPower=1&HashingUnit=TH%2Fs&PowerConsumption=0&CostPerkWh=0With 1 TH/s that costs USD 220 in Hashflare, you may have more or less USD 667 in one year, discounting the maintenance fee. Of course I hope that the increase of the mining difficulty will be compensate by the btc value. |
|
|
|
Why not mixing it up?
Step 1: Get back your initial investment (if Hashflares calculation ist correct this should happen after 2.5 - 3 months)
Step 2: Cash out a set amount of winning (e.g. after another month)
Step 3: re-invest for one month to add to your mining capacity
Go back to step 2
This way you will realize winnings but also keep your mining running without new investments from scratch.
I made a guide with updated values... I still recommend them, but you have to be patient in some cases. See: http://conquistarbitcoins.blogspot.com.br/2017/12/how-to-mine-bitcoin-in-cloud.htmlROI today is about 4.5 months, but I'm hoping bitcoin will continue to grow. |
|
|
|
|
Show Posts
?? 
