Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[JKDK]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

[Valik]

Hello, could you help me with an issue please?

My video card is a R390X.

Today I'd plugged in an old card (4870) just to see if it still worked. Then I took it out and also re-installed the Radeon software. But after I'd turned on the miner again, it no longer outputs the purple text strings with the temperature and fan speed of my card.

It still recognizes the R390X and mines normally, but this lack of information on temp is making me nervous.

If its windows then I suppose you need to go for DDU and then reinstall drivers.

I've used DDU's driver removal function and installed my drivers again. Now it shows this:

https://imgur.com/EKdlyDi (#1 is "Standard VGA graphics adapter")

Still no temp strings...

[cryptoillusion1]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

[Rickirs]

Hello, could you help me with an issue please?

My video card is a R390X.

Today I'd plugged in an old card (4870) just to see if it still worked. Then I took it out and also re-installed the Radeon software. But after I'd turned on the miner again, it no longer outputs the purple text strings with the temperature and fan speed of my card.

It still recognizes the R390X and mines normally, but this lack of information on temp is making me nervous.

If its windows then I suppose you need to go for DDU and then reinstall drivers.

I've used DDU's driver removal function and installed my drivers again. Now it shows this:

(#1 is "Standard VGA graphics adapter")

Still no temp strings...

If its showing Standard VGA graphic adapter then correct drivers are not installed. May be from device manager, update driver for it manually and see if that helps.

[JKDK]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

[Valik]

Hello, could you help me with an issue please?

My video card is a R390X.

Today I'd plugged in an old card (4870) just to see if it still worked. Then I took it out and also re-installed the Radeon software. But after I'd turned on the miner again, it no longer outputs the purple text strings with the temperature and fan speed of my card.

It still recognizes the R390X and mines normally, but this lack of information on temp is making me nervous.

If its windows then I suppose you need to go for DDU and then reinstall drivers.

I've used DDU's driver removal function and installed my drivers again. Now it shows this:

https://imgur.com/EKdlyDi (#1 is "Standard VGA graphics adapter")

Still no temp strings...

If its showing Standard VGA graphic adapter then correct drivers are not installed. May be from device manager, update driver for it manually and see if that helps.

It's showing like I have two GPUs; one is my normal R390X, and another is "standard".
I have two screens, if that has something to do with...

[muzuca]

Hi,

I am having a hard time with my voltage setup on my second rig so any help would be great, I have the below setup.

Asrock H81 BTC Pro R2.0
6 x Sapphire RX480 Nitro+ 8GB
2 x EVGA 750 G2 PSU

All bios mods are running Ubermix 3.1 via PBE 1.6.4

It currently runs cards at 1100/2000 875/850 & a couple at 1050/2000 850/850

I am getting between 29.2MH/s & 29.5MH/s per card total of 175.5MH/s for entire rig.

Running WIN10PROx64, Claymore 10.1, using DAGFIX drivers mining ETH only, but it is pulling over 900w at the wall, using Wattman to control speeds etc. (Temps range from 57-62)

My rigs run relatively quiet, due to their locations, quiet enough the wife is happy to have them in the room and quiet enough you can hold a conversation next to them (Saves me having to turn on the heating)

I had this running at just under 800w a few weeks ago, but unable to reproduce how I did this, so any help would be great

Managed to reset everything and start again, now pulling 840w-845w.  alot better than the 960w it was pulling. And managed to squeeze out another 1MH/s and lower temps a degree or 2

Not sure what happened overnight, but woke up to the rig going nuts, pulling 1150w, killed miner and restarted, now pulling 765w - 770w WTF?

After a reboot its now pulling 900w - 920w erratically.

Anyone have any ideas?? its getting frustrating, it can run for weeks stable as hell and poof overnight, no changes it just decides to throw a wobbly.

My 7x RX470 rig has been running for months no issues (fingers crossed), so solid. But the RX480 rig, same OS, same CM, Same Drivers, Same PSU's etc does not.

read my post here: https://bitcointalk.org/index.php?topic=1433925.msg26800863#msg26800863
do not use blockchain drivers and use overdriven for gpu configs

I’m using blockchain drivers, but to stable my rigs I need to open and close the miner program three or four times to get the correct speed and config.

The process is: click in the claymore miner, waits until setting up all the Dag files, before start really mine, I close and repeat the process until the speed is ok.

I have 3 rigs, 480 and 580 nitro 8gb, the most stable are the 580 nitro... when stabilize the rigs works for more than 40 hours.

I’m using all the config commands of claymore to set the clock and voltage.

[muzuca]

These days I got the error 511 incorrect temperature and I solve changing the power supply of the riser.

I tried change the raiser and using the same energy plug unsuccess... only works when I changed the energy plug of the riser.

[JKDK]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

[muzuca]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start again.

This process works for me.

[JKDK]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start again.

This process works for me.

Thanks for the replay but still no

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

[muzuca]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

 -cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

[JKDK]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

 -cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

It gives the same :/

I use 10.2 and the 23aug driver too.
And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/

When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again

[Rickirs]

It's showing like I have two GPUs; one is my normal R390X, and another is "standard".
I have two screens, if that has something to do with...

There is some confusion here, so you are saying now your old card is not detected properly if you have both carts in use ?
I hope you know that latest drivers won't work with HD 4xxx series.

I am not sure if both can be worked together, my advice is that download relevant driver for your old card and unzip somewhere and from there manually update driver for "older one" using device manager.

Also, from the FAQs , I can see this...

- I see only one card instead of two in temperature management info.
  Disable CrossFire, don't use Remote Desktop Connection.

[Valik]

I hope you know that latest drivers won't work with HD 4xxx series.

Yeah, I've already seen that. I've removed the old card before writing the first post, and later I've removed Catalyst with DDU and did a 'clean' install of the new Radeon drivers.

- I see only one card instead of two in temperature management info.
  Disable CrossFire, don't use Remote Desktop Connection.

I haven't been using either. There's only one card installed as of now, and the miner gives no temperature info at all.

[Ursul0]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start again.

This process works for me.

Thanks for the replay but still no

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

you should try to dance around your rig naked between 2nd and 3rd miner restart.
please also share your experience with us.

[muzuca]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

 -cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

It gives the same :/

I use 10.2 and the 23aug driver too.
And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/

When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again

I think this is a normal behavior, only the led that in my case still on independent of the miner.

The link that you share support Hynix and Samsung memories, I didn’t see for Micron, that is your card.

[JKDK]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

 -cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

It gives the same :/

I use 10.2 and the 23aug driver too.
And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/

When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again

I think this is a normal behavior, only the led that in my case still on independent of the miner.

The link that you share support Hynix and Samsung memories, I didn’t see for Micron, that is your card.

There is a link to the Micron firmware in the comments section https://mega.nz/#F!oi4QERJb!CyJ8-6mNNe0NQApBL2vE0g

[muzuca]

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this

 -epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

 -cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

It gives the same :/

I use 10.2 and the 23aug driver too.
And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/

When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again

I think this is a normal behavior, only the led that in my case still on independent of the miner.

The link that you share support Hynix and Samsung memories, I didn’t see for Micron, that is your card.

There is a link to the Micron firmware in the comments section https://mega.nz/#F!oi4QERJb!CyJ8-6mNNe0NQApBL2vE0g

So, the next step in my opinion it's changing these configs direct in the bios using Polaris Editor... it's quite easy... I had to do that in some cards when I was using a old version of claymore.

Look my 580 nitro micron gpu config in Polaris: https://ibb.co/dJ4KX6

[Rickirs]

I hope you know that latest drivers won't work with HD 4xxx series.

Yeah, I've already seen that. I've removed the old card before writing the first post, and later I've removed Catalyst with DDU and did a 'clean' install of the new Radeon drivers.

- I see only one card instead of two in temperature management info.
  Disable CrossFire, don't use Remote Desktop Connection.

I haven't been using either. There's only one card installed as of now, and the miner gives no temperature info at all.

Thats odd, I am out of ideas, may be someone else can help here. Its all about proper driver. Tried Claymore10.0 ?