AwesomeMiner Coin Updater 0.7- Added support for Insight Explorer API
- Added support for any coin at minerpool, see example below or in OP
- Added support for using /api/getdifficulty on Iquidus explorers
- Fixed WebAPI not returning the latest released version
You can find the latest update in the Mega link. Example minerpool { CoinFullName: "Victorium", CoinShortName: "VIC", Algo: "Ethereum", BlockReward: 6.25, BlockTime: 30, BlockExplorer: "minerpool"} Realize I posted this on the AM thread and not the plug in thread so figured I'd put it where it makes more sense... This latest release appears to have issues with all of cryptoid's coins. Any ideas? Says blockexplorer is not supposed for all the coins I have using that. (was working on the previous 0.6 version). - Fixed a logic bug introduced due to the minerpool addition
- Learned how to create unit tests and have begun implementing them so this kind of thing doesn't happen again!
You can find the latest update in the Mega link. |
|
|
|
AwesomeMiner Coin Updater 0.7- Added support for Insight Explorer API
- Added support for any coin at minerpool, see example below or in OP
- Added support for using /api/getdifficulty on Iquidus explorers
- Fixed WebAPI not returning the latest released version
You can find the latest update in the Mega link. Example minerpool { CoinFullName: "Victorium", CoinShortName: "VIC", Algo: "Ethereum", BlockReward: 6.25, BlockTime: 30, BlockExplorer: "minerpool"} Realize I posted this on the AM thread and not the plug in thread so figured I'd put it where it makes more sense... This latest release appears to have issues with all of cryptoid's coins. Any ideas? Says blockexplorer is not supposed for all the coins I have using that. (was working on the previous 0.6 version). Strange, I didn't change anything there - I'll take a look |
|
|
|
AwesomeMiner Coin Updater 0.7- Added support for Insight Explorer API
- Added support for any coin at minerpool, see example below or in OP
- Added support for using /api/getdifficulty on Iquidus explorers
- Fixed WebAPI not returning the latest released version
You can find the latest update in the Mega link. Example minerpool { CoinFullName: "Victorium", CoinShortName: "VIC", Algo: "Ethereum", BlockReward: 6.25, BlockTime: 30, BlockExplorer: "minerpool"}
|
|
|
|
AwesomeMiner Coin Updater 0.7- Added support for Insight Explorer API
- Added support for any coin at minerpool, see example below or in OP
- Added support for using /api/getdifficulty on Iquidus explorers
- Fixed WebAPI not returning the latest released version
You can find the latest update in the Mega link. Example minerpool { CoinFullName: "Victorium", CoinShortName: "VIC", Algo: "Ethereum", BlockReward: 6.25, BlockTime: 30, BlockExplorer: "minerpool"}
|
|
|
|
Lastly, in appears you do not support the Insight api?
I second the possibility for insight api support. It's on my list.. I just have never run across the need for it. Might take another look at it today. |
|
|
|
I have this for stipend: {CoinFullName: "Stipend", CoinShortName: "SPD", Algo: "C11", BlockReward: 15, BlockTime: 90, BlockExplorer: " http://explorer.stipend.me/ext/summary", BlockExplorerType: "Iquidus"} ...which is totally useless. Stop and think about what you're doing. Look at the data. It's clearly returning proof of stake difficulty most of the time. It's not marked from what I see as PoS.. are you telling me that it sometimes returns PoW and sometimes PoS in the "difficulty" field? If so that is monumentally stupid on their part... |
|
|
|
Sentinel is fine. Mnchecker reports blocks are good Command line mnstatus reports online I can remotely connect via masternode command and it's online. This is getting annoying. |
|
|
|
Thanks I'll check this out |
|
|
|
I know that's not ideal, but i encountered lots of explorer that dont give me the summary page.
In that case cant you implement to get /getdifficulty only?
I'll add it to my list |
|
|
|
Hi buddy, I am adding denarius to the list. But I get an error about the block explorer not being supported. But I think it is supproted. https://denariusexplorer.org/ext/summaryMay you look into it? thanks! Ugh looks like they changed the API - the difficulty is broken out into a PoW and a PoS section.. Looks like denarius is on CryptoChainz - you don't need to fill out the block explorer section then. Ok I left denarius in teh config without block explorer. It works but it reports completely wrong value http://prntscr.com/itviajIt's open since a couple of hours but still reports wrong value.... CryptoChainz is not as immediate - just verified that they're both correct |
|
|
|
|
All Masternodes reported as "EXPIRED" now in my wallet even those I can "masternode connect" to them just fine.
Restart the wallet and let is re-sync.. still nothing. This is growing frustrating.
|
|
|
|
Patrick,
Can we choose to order the coins value and online services by profit and not by revenue? Some algos take more power and the profit is lower than the revenue...
I will make Revenue and Profit two separate columns in the next release. This will make it possible to sort on any of them. Yesss I forgot to ask for this!  |
|
|
|
Hi buddy, I am adding denarius to the list. But I get an error about the block explorer not being supported. But I think it is supproted. https://denariusexplorer.org/ext/summaryMay you look into it? thanks! Ugh looks like they changed the API - the difficulty is broken out into a PoW and a PoS section.. Looks like denarius is on CryptoChainz - you don't need to fill out the block explorer section then. |
|
|
|
What do you have set for your Quark hash rate in the profit profile? I'm guessing 10GH/s which is a lot for Quark...my 1x 1080TI gets about 55Mh/s
Yes, 10 GH/s. But baikal x10 runs quark at 10 GH/s, that's why I set that value. Other coins using skein (5 GH/s) are correctly updated. I will add another 10 GH/s coin and let you know. Thank you. It is a bug with Awesome miner it looks like with Quark specifically. As a test, try setting instacash to a different algo and set that algo to 10GH/s like you have. It will calculate profit with more realistic numbers. Sootha's plugin is pulling all the data in correctly (value and difficulty) Thanks for debugging that for me - don't think I'd have figured that one out. |
|
|
|
Maybe I'm doing something wrong, but with ICH I get huge values. My config.json: {CoinFullName: "InstaCash", CoinShortName: "ICH", Algo: "Quark", BlockReward: 7.5, BlockTime: 30, BlockExplorer: " http://instacash.network/ext/summary", BlockExplorerType: "Iquidus"} After updating, I should earn 0.375 BTC/day (10 GH/s Quark), instead of 0.0015. That's cool, :-) but I can't find where I'm failing. Other coins seem to be working correctly. I'm using latest release of both AM and AM plugin. Thank you. Did you let it run 10-15 minutes for the averaging to settle the values? |
|
|
|
Would you consider adding support for CURV?
Sure I'll add it to my list. Thanks! ETHF would be the next request. Will it ever be able to be built in such a way like your other plugin where there is a config file or is each MN more unique than a block explorer? They're much more unique. I was able to add the last batch easily because they all share a common BlockExplorer type with minor variances. |
|
|
|
AwesomeMiner Coin Updater 0.6- Did you know that adding 0 and -1 to an array of values kind of destroys a calculated average? I did! But I didn't check for it!
- Fixed numerous bugs in the averaging function (thank you all you eagle eyed mathematicians out there)
- Added support for Crex24 exchange
- Increased coin updating from every minute to 2 minutes (some explorers were banning us)
You can find the latest update: https://bitcointalk.org/index.php?topic=2979494.0
|
|
|
|
AwesomeMiner Coin Updater 0.6- Did you know that adding 0 and -1 to an array of values kind of destroys a calculated average? I did! But I didn't check for it!
- Fixed numerous bugs in the averaging function (thank you all you eagle eyed mathematicians out there)
- Added support for Crex24 exchange
- Increased coin updating from every minute to 2 minutes (some explorers were banning us)
You can find the latest update in the Mega link.
|
|
|
|
|
Show Posts
