For all the slagging that KNC have got over the titan (and I have done some of it), it's been by a long way the most profitable of all the machines I have bought off them So here is something not seen in this thread for a long time ...... "Thank you KNC"  Yes and me too after hundreds of hours of research , and testing to "finish their work". AFTER they are modded , they work flawlessly , without problems, as long as you want to run them. Vegas |
|
|
|
|
Ok im SURE one of you guys are pro at Graphics. I got a good laugh , but seriously, can someone with graphic skills produce something professional?
Vegas
|
|
|
|
I'm on linux pc and the exe wouldn't start with wine but I have the wallet going in a windows VM. It crashed once but started the 2nd time no problem.
The 'pump' tab on the wallet is easy to figure out and populate with addresses. I sent 1 SNRG to join the (test) pump and was sent back 3 blocks later with the (test) coin and exchange pick.
I saw your registration come in and manually sent you the pick. I updated pumps a few minutes ago, so please see if your Pick entry is populated at the top right of the pump page. It should be the same as the narration you noticed in your transaction list. Hi Dev, Im having the same issue. Picks not populating. It gave me a few pop up windows, but thats all. If you need more details, please PM me. Vegas |
|
|
|
|
Price of CON holding strong as most every other alt is crashing.
Vegas
|
|
|
|
|
Thanks for the cheap diamonds. When the price went to 180k +, I was upset I didnt by more when the prices where much lower. Wont make that mistake again.
Vegas
|
|
|
|
|
Guys we are looking for someone that can help with graphics. We want to remove the KNCminer logo as we do not want to be associated with them in any way. If any of you have graphic skills can you make a nice logo that has the same dark blue color as the Kncminer logo, except it will just say "Titan Miner". This will be used in the Titan Gui. Make it nice and fancy as you can. Be original, and please submit your work here on this thread. Also we need some help with our new OP. Can someone create a nice looking op with our current information compiled and post the code here, so we can create a new professional looking OP?
Thank you
Vegas
|
|
|
|
|
Greg, first thank you for your support on my project, FLY. I fully trust and support you. I am VERY excited to see your first coin, and will invest in you!! AWESOME!! I will also post on my site that gets 20,000 visitors a month, all crypto enthusiats to get the word out about your coin when it launches. I would like to see a pow also, but it doesnt matter either way, im in!!! Please PM my when your coin is near launch or when you want me to post an article about your coin.
Thank you
Vegas
|
|
|
|
Ok I need to gain some Funds for getting Two things Sorted
1. A Multipool For Fury
2. Android Wallet with POS For Fury
Now I'm not too sure about how easy it will be to raise the funds as it is quite a lot well to me anyway
1. 1.5BTC for Us FURY to be added onto xpool.ca
2. 1.17BTC For Fury Android wallet with POS
Do you think that is cheap or too expensive.
Any Ideas on how I could obtain such funds Short of Advertising Myself For Hire For X amount of Time.
Thanks 1.5BTC to be added to a multipool is VERY excessive. Do YOU make a percent of the money generated from that pool? If so, how long do you speculate it will take to recover 1.5BTC. Why not setup your OWN multipool, or find someone MUCH cheaper to do it? Dont worry about andriod. Find someone to setup a multipool for much less and generate money from that. Vegas |
|
|
|
No one has posted on here for 7 days?
I noticed TEK took a huge hit today. Anyone know what is going on?
I can guess. BTC took a huge hit, and the fourtunes of TEK always seem to ride that wave. That's what it is, a guess, but I think it fairly accurate. EVERYTHING is down right now, everything. Its a buyers market. Enjoy the low prices on everything! Vegas |
|
|
|
|
Could it be that your fudding this thread, and hurting prices? I am a large 8-bit investor, and respect your work too. So you are hurting YOUR investors too! Want to give it a rest for a while and let the price recover? Btw the price OF EVERYTHING is at a low right now. BTC is under $200!! I follow both of your threads, and a high holder on both of your coins, and you BOTH of you are fudding each others threads, and it needs to stop, now. Ill cash out from both of you, and be done. I call a truce!!! Your investors are taking the hurt from the actions of BOTH of you. Thank you.
Vegas
|
|
|
|
Two months ago this shit was worth 10x more. masteretarded plays a fool "nothing had happened, development will continue". Within next 2 months it will be worth 500 satoshi.
So finally, we paid for coins that are going to be worth nothing to fund HIS website.
Who is an owner of toshidesk and other crap? Who has permission to sell it or do anything he wants?
This is classic scam, similiar to Butterfly preorders, you pay for the project, you pay for the production, you pay for the distrubution, they use them as long as they bring their profit. Once they bring no profit they start to deliver.
In this case we paid for the project that it's not our and got shit-worth coins called MTR.
There is only one winner here, it's masteretarded with our BTC from IPO.
Time to wake up my friends.
I hope you realize you are really hurting the investors. I appreciate your opinion. Now, Im going to ask you nicely to stop. Youve made your point. Thank you. Vegas |
|
|
|
My problem was described at May the 9th here it is ...
I'm getting crazy because I am trying to upgrade, but after I upload the 2.0 and reboot, it start rebooting but then freeze in the screen at kncminer spinux. And don't move. So I flashed back to 1.02 and it works. When I try to upgrade in whatever version (even the 1.15) it freezes.
Please help me finding the clue of it. It makes me crasy! Some things you can try: Try a different flash disc Start with ONLY 1 cube and see if it boots Let me know from there. Vegas |
|
|
|
|
My vote turn logging off.
Vegas
|
|
|
|
No I wont, all of my successes in life have never been based on luck. Its honesty and hard work. Whats really going to contrast, is when a guy like me, that cannot write a line of code, and creates his first coin, and it goes to the moon  Thanks for bumping the thread and getting the word out for me. By the way, I am already 10 steps ahead of you. There are LOADS of surprises in store as there have been in the past. Careful not to fall into any of my traps that have already been set for you. Vegas |
|
|
|
|
No worries, its in the works now as we speak.
Vegas
|
|
|
|
Where to buy the premium version? Only on Ebay? Very intrested in the hardware manual, have 4 titan rigs and multiple cubes with different kinds of problems with some dies...
You can contact him directly for access to the premium code Naw, lets not confuse people, vegasguy handles all the premium sales =) ... if the .75% donation one works for you, thats already available as a flashable .img file from my github. https://github.com/GenTarkin/Titan/releases/tag/v.98Hey GenTarkin, what are your thoughts on starting a new thread with links on the OP? Seems that our links and information is splintered throughout this thread. That way we can update the OP with latest information and latest links to free and premium. Let me know your thoughts. Anyone else is welcome to chime in. Vegas |
|
|
|
|
AWESOME!!!!!!!!!!!!!!!!!!!!! Lets hijack Bittrex with PURE VOLUME!! WE DID IT!!!!!!!!!!!!!!!!!!!!!!!!
VEGAS
|
|
|
|
|
Great suggestions. Thanks for your input. Im already using thicker gauge wire in my Y connectors, but the main fault lies in the male PCI-E plug. Thats were most of the heat generates.
Anyway hardware updates:
Ive fixed so many cubes, I think my hands are going to fall off. Most people are reluctant to ship their cubes to me , and I dont blame them. It could be that they dont want to be without them, or dont want to incur the expensive shipping , or risk having them damaged in shipping. As I am the only person that I know of that can repair them, and even make them stronger than factory, I am getting so many cubes, im having a hard time keeping up. So Ive made some decisions that I think you guys are going to like.
Im going to start a manual that will include everything I know about repairing titan cubes. Ive put in a few hundered hours with these things. Most of it initially was all trial and error as there is no information about them on the internet, and Kncminer read the same old script when you call for support that says to tighten the single screw near the exhaust. blah, blah balh. I Tried that on 11 different cubes and it does NOT work, not once. Total lies. No surprise there. The same 11 cubes Ive repaired MY WAY to fully working order with MUCH lower temps and full voltage, no more .8v (dead dies). They are actually not dead by the way, they are idle. More on this in the manual. This manual will be the "master manual of titan cube repair". It will be massively detailed. The good news is , the repairs are very simple once you know what to do. There are about 10 different parts you will need that might cost under $100 total. The manual will include LOADS of pictures and some videos. The manual will have links to purchase the exact parts youll need. Initially I will be emailing the manual to our paid premium customers as a reward for early adopters and supporting us. I encourage those that receive the manual to please comment here on what your results were, good or bad. Im confident that youll be able to fix all of your cubes with the information contained. I respecfully ask, that you do NOT reveal the contents that are in this manual as I have spent hundreds of hours of testing to figure all of this out. You may comment on your results, and your opinion about the quality of the manual. Later down the road, it may become a separate paid item, not sure yet. I will be constantly updating the manual and will email a new version as it comes out. I have not started the manual yet as I needed to be positive that what I was doing was working, and that my repairs did not fail in a short time. ALL of my repairs have held, and not failed after the repair. So, I will begin the manual in the next few days, and we should see our first version released in about a month. Its going to be long and VERY detailed. I own 6 sets of titan batch 2, so just before release, I will create a you tube video showing how long my miners have been running (it will be over 24 hours on all of them), then I will go through each miner in the advanced section and show that all of them have low temps, and ALL of them have full voltage. Im seeing around 48C-55C on vrm temps after 24 hours @300MHZ. This will be absolute "proof of repair".
Vegas
|
|
|
|
|
Show Posts
