So, 7770 is 1.5 times slower than 5770?  What a waste of money on this junk. 7770 is a overpowered model of 7750, I think you may be wrong as I am using 7750 for some further havesting. |
|
|
|
|
Each design will cost you .50 BTC. (Paper work)
Interested party can pm me about the service, Will provide demos if in needs before assignment.
|
|
|
|
You replied? Well, I also am one of these seller too. However, I think I should do bigger. Let see if it works. |
|
|
|
|
I think, to slow down the nightmare, Why don't you apply Mineral oil with?
I am still asking if the method is applicable with HPC.
I have read a report that If using liquid cooling, the cooling cost is reduced very great due to density and the heat capacity which has been using on engines for at least a century.
|
|
|
|
|
What would you like to. I am good at Chinese Mandarin and with little german respect.
|
|
|
|
For building up, Interested party can use the stratum to follow up, The points below are p2pool powered for sure. Fee is 0.5%, to ensure the maturity BTC: http://noirpool852.no-ip.biz:9332LTC: http://noirpool852.no-ip.biz:9327Additional investment can be made with the following address BTC: 17nTc6vWaMwRLVTeK3nyU4oKFMxDsCyb7z LTC: LWEWnvPmTRT31fY4YnUuPqUE91Mne8SQW1 Purpose for the 0.5% fee: Oil Pool with Stronger rigs if the fund is enough to build up. (Which should be at least 40BTC (USD 4,000 at least) to construct), Also power cost. Note that the rig performs at least 1Mhash/s in scrypt based with how many BTC collected. The rig will be applied on Scrypt mining first as scrypt mining is more trustful right now. I also am considering to put some SHA-2 ASIC in the pool at the later stage. |
|
|
|
can any php pros of you create me one? id like to have it like this one http://www.bitcoinx.com/profit/it dosent need to have graphics. i dont have any coins left atm but i will give you up to 0.50BTC when i recharge and like ur script. Kashim You just ask How to, I have provided how, Only the part one is not easy, the second part is just plain thing, which a K3 student can count it out. |
|
|
|
Looking How to? There are two parts, The first parts is the most critical as the second part is very simple as How much by the unit price minus the operating cost for profit, the detail is ignored in this post. The basic point is Using The reward per block, Divides The share(Difficulty) Then You will need to put hashrate (Need Real, for example 600M means 600,000,000) by 86400 / 4294967296 If applied the thing above, for 600mh/s, You will get 0.005 BTC (can be anything) a day based on 50M difficulty and 25 per block. If you like to predict, Then you will need to sum up. The second part is all about cost issues, which let yourself to do, it is simple. Out minus In, If In smaller than Out, then Black. Otherwise, Red. Why 2^32? For 32-bit System as 32-bit system is still on main line. (The actual is 4,294,967,296) 1 day contains 86400 seconds, each hour is 3600 seconds. Source: http://bitcoin.stackexchange.com/questions/493/exactly-how-does-one-calculate-how-many-btc-they-will-get-a-certain-hashrate, Accessed on 24 August 2013 I think, If you understand the rule, then you should read the php programming guide to build it. The idea is currently still free, but source code is not free. |
|
|
|
我还是新人, 也想了解如何赚比特币.
如何賺? 只要算力夠多(例如200GH/s),就可以了. 不過, 人們通常用買賣賺取差價算了. 另外, 我來自香港的. 不是珠海. 珠海與香港, 只是兩小時內的事情. |
|
|
|
|
It looks like the 7750 is more reasonable than 7770.
I may be able to perform the 150Mh/s as I am able to perform 150Khash/s scrypt mining.
It looks like you have configured something wrong, I only use 895/1295 for it.
|
|
|
|
|
It looks like you will not change very often
You should use oil cooling to avoid more problem.
I am planning for this once the first blood from contracts received.
|
|
|
|
The being is no problem at all as the being does not need to upgrade, just replace a newer one. |
|
|
|
|
不是，製冷費用要考慮在內。因為太差，故有人用古法重新包裝，油冷。於是電費不用付很多，432是432
|
|
|
|
油冷,需要特殊的油,菜油肯定不行
用于冷却的油是含氟的有机化合物。 只是市面上的護膚油，強生出品 |
|
|
|
油冷,需要特殊的油,菜油肯定不行
若工程或交予人，當然不好。不過有人測試過粟米油，向日葵油是基本可行的，你可能不知，但要更多數據才行。 |
|
|
|
I had 83 7950s air cooled no aircon ambient temps of over 25c and the cards were still sitting cool  water cooling is good reliable and nearly silent oil cooling is messy runs hotter and voids the warenty PERHAPS, normally liquid cooling voids the warrenty. But there is something wrong in their talk, using water is absolutely to void warrenty because water is good media for electron, I do not fuck my rig up with water. Oil is not, and there are many options like non-flammable oil like mineral oil, vegetable oil, They are safe for transport. Also safe for electronic equipment. The people, except intel, try to answer why use oil is better than air if space is very tight, operational coat is very tight. Only few companies right now, answer it. I am discussing seriously as Intel does big right now. |
|
|
|
You didn't look at my video. They use a passive cooling system but I agree the liquid they use is probably expensive (not mineral oil).
Well, not only puget, even some service provider (I have little idea of the speaking but with 'oleju' :oil in english), the people laugh, but they relise the emotion is completely wrong afterwards , mentioning in oil, they don't use vegetable oil but some medical use oil labeled as baby oil. The concept I have found , before I post, I have to trace the needed including diesel engine. The half-2-4-1 may be the typical method to maintain the engine operational even with no diesel in. looks like I have found, mainly in polish. I think puget is a serious tester like intel. 1. http://m.youtube.com/watch?v=ik2Uo3c98zk (polish) 2. http://m.youtube.com/watch?v=SJUbCGvWO4A (polish) 3. http://m.youtube.com/watch?v=5qQsOmOTFKg (Only little idea, mainly in polish as at last, it mentions company made, packaging the oil PC into scary story(experiment , I just have noticed the pronounciation , demonstrating start from stop to make me comfortable as most video I have watched , filled Live) 4. http://m.youtube.com/watch?v=Eub39NaC4rc&feature=related , alterative solution for oil. Johnson baby oil or the related should be. 5. Company talk, SSKN 2010, http://m.youtube.com/watch?v=HVKWRBBEers&feature=related, the uploader himself has introduced the idea to reduce the cooling cost while providing better service for clients. There will be no laugher anymore, we shall see in future as if temperture differance is too big, then this will be problem. 6. demostration with vegetable oil, http://m.youtube.com/watch?feature=related&v=hbOZbSl-14k&rdm=ufvfz6td&gl=HK&hl=zh_TW&guid=&client=mv-googleAlso puget and intel should be, too . Note that if you like to transform the oil from liquid into stream, You will need 473K to do. Flammable can reach that faster so if you pour gasoline, or diesel in your rig, the rig will be wasted. There are many samples found on youtube, use oil PC or komouter w oleju ( or something like this, it means computer in oil, polish) |
|
|
|
I planned to do it but I gave up because the hardware related to the tank & cooling & mineral oil is way too much expensive.
But maybe I will do it if I ROI with my previous mining rig and investment.
You are wrong. Oil cooling is proven method. Start from vegetable oil. Then you will know why it is practical. Talkers on web, suggest to use vegetable oil or Johnson baby oil instead of that, Intel also does. You meant that I am wrong to think that I can only use expensive mineral oil which is expensive right ? I doesn't change the fact that you have to cool the oil (especially with mining rig) with a water pump and fan system and that is expensive. Yes it is. Just slightly bad but easy to find, price tag is friendly. However the pump and radiator is the thing, but if, comsidering the operational cost, it is more reasonable than normal ones. Think about why the glass-fibre bus is more reasonable on operational cost but not in the initial cost. |
|
|
|
I planned to do it but I gave up because the hardware related to the tank & cooling & mineral oil is way too much expensive.
But maybe I will do it if I ROI with my previous mining rig and investment.
You are wrong. Oil cooling is proven method. Start from vegetable oil. Then you will know why it is practical. Talkers on web, suggest to use vegetable oil or Johnson baby oil instead of that, Intel also does. |
|
|
|
|
Show Posts
)
