SCAM POOL.
Earnings for 6 hours = ZERO!
Not scam.Due to attack on the pool, the balancing and payments were autostopped , therefore delayed. After manually checking all payouts were transferred immediately.  |
|
|
|
Max pool stuck?
Please, MAX is going up and I didn't get any payout last night! :-( Dear members, because of a bug in open source pool engine, our pool based on, shares of "moria"-server were not calculated from 15.03. That's why "erebor"-miners got too many coins, you were overpaid from "moria"-miners. Yesterday I recalculated all shares and balances for last two days. The payments redistributed fairly according to all your sent shares for this time. Please check your payments summarizing 15-17.03.PS: I'll sent the patch to developers! I'm sorry for troubles and Thank you again! |
|
|
|
so, if interest exists, we could suggest to owners to give to miners community all rights for helixcoin and try to promote/support it by ourselves
all coins based on the bitcoin code are open source. The community already has the right to do with it as they wish. absolutely nothing is stopping anyone from developing this coin. this is not about open source, but domain name and also premine for giveaway. if they'd hand it over, at least the greater part of premine, you can start a promotion program, otherwise.. |
|
|
|
Will do. Your pool is fantastic. Thank you!! |
|
|
|
Explain please, what with the speed at pools? Why so round long? And coins are not credited?
you get your payments not earlier than an immature block becomes "confirmed", it takes about an hour |
|
|
|
So you do not care about coin only about your fee? No so good.
I have been also asked by other coin devs almost every day, to add thier coin to my pool. But I have sadly no time for all what I'd like to actualize! Now tell me, I just enjoy my fee for nothing doing |
|
|
|
So you do not care about coin only about your fee? No so good.
I am 18-20 hours a day, every day busy with technical issues for coins. If you have any technical question, I support my users every time! (by email it goes faster). I communicate with developers every day, also offering some advancement ideas. But you know, if devs lose any interest to coin, no matter what does the community do, the coin will die One of examples: https://bitcointalk.org/index.php?topic=489172.msg5472647#msg5472647https://bitcointalk.org/index.php?topic=489172.msg5489969#msg5489969I do not search all my posts from all coins, I also do not show you my privat correspondence, but Dwarfpool has a good and sure reputation Just some of the comments from last added coin: Dwarfpool turns out to be a kickass pool. Have pointed my keccak miners to the dwarf. The hourly payouts and monitoring thing works brilliantly. Clean interface and fewer steps to get setup - no registration. Nice. I agree those germans did a good job here! I enjoy mining with them. Dwarfpool is awesome. Agreed. It's like a little brown Mercedes Benz in the land of KIA. Thanks. Dwarf is da bomb. All good. I'm proud of my work! So, I'm really sorry that I have no more time for marketing thing! |
|
|
|
Any problems with dwarfs? stats not updating?
Yes. DWARF, CHECK-IN PLEASE. sorry, I turned off the stats just for few minutes to check one issue, but pool is and has been worked all time! |
|
|
|
Anyone can help ? I need nodes to sync wallet . But I tried using this conf rpcuser=rpcuser rpcpaswords=rpcpass rpcport=8669 port=8668 rpcallowip=localhost daemon=1 gen=0 server=1 addnode=maxcoin.cloudapp.net addnode=maxcoinus.cloudapp.net addnode=maxcoinasia.cloudapp.net addnode=maxexplorer.cloudapp.net addnode=213.179.202.19 It doesn't sync at all, I remain at block 0. Anyone can share the working nodes as of now? Thanks  addnode=208.94.38.180:8668 addnode=89.212.78.74:8668 addnode=188.226.146.37:8668 addnode=185.36.72.32:8668 addnode=107.170.40.71:8668 addnode=50.23.114.252:8668 addnode=41.164.22.124:8668 addnode=162.243.238.206:8668 addnode=91.109.16.78:8668 addnode=209.236.123.23:8668 addnode=188.165.194.96:8668 addnode=61.147.73.188:8668 addnode=106.186.121.139:8668 addnode=23.239.157.60:8668 addnode=65.188.163.155:8668 Thanks its work ! by the way what is the current block now ? i seem to be still syncing. on DwarfPool webseite you can see what the block just searching http://dwarfpool.com/max |
|
|
|
Anyone can help ? I need nodes to sync wallet . But I tried using this conf rpcuser=rpcuser rpcpaswords=rpcpass rpcport=8669 port=8668 rpcallowip=localhost daemon=1 gen=0 server=1 addnode=maxcoin.cloudapp.net addnode=maxcoinus.cloudapp.net addnode=maxcoinasia.cloudapp.net addnode=maxexplorer.cloudapp.net addnode=213.179.202.19 It doesn't sync at all, I remain at block 0. Anyone can share the working nodes as of now? Thanks addnode=208.94.38.180:8668 addnode=89.212.78.74:8668 addnode=188.226.146.37:8668 addnode=185.36.72.32:8668 addnode=107.170.40.71:8668 addnode=50.23.114.252:8668 addnode=41.164.22.124:8668 addnode=162.243.238.206:8668 addnode=91.109.16.78:8668 addnode=209.236.123.23:8668 addnode=188.165.194.96:8668 addnode=61.147.73.188:8668 addnode=106.186.121.139:8668 addnode=23.239.157.60:8668 addnode=65.188.163.155:8668 DwarfPool Quality you can trust! Profit Calculator |
|
|
|
Some improvements on DwarfPool ( Anonymous, no registration required) 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust! 3. We have deployed a new server in Japan! eredluin.dwarfpool.com For users from Asia this will be faster than using our European or American server. You should use the closest server to your location for best performance!DwarfPool Quality you can trust!DwarfPool - Anonymous pool, no registration required- Autopayouts from 100k XXL - True round based PPS (proportional your shares), 1% fee - DDoS protection by different providers - Free choice of 3 server locations worldwide- Separate workers with the same wallet-id for better vardiff and detailed per rig statistics - Monitoring of every rig via email - Maxmimum transparency, no stealing shares and no hidden fees! - Greatly optimized stratum pool engine - Works with all known GPU and CPU miners. - Stratum protocol: 3365 - Supported new Stratum and old Getwork protocols. Servers: eredluin.dwarfpool.com (Japan) erebor.dwarfpool.com (France) moria.dwarfpool.com (USA) http://dwarfpool.com/xxlDwarfPool Quality you can trust! |
|
|
|
I just wanted to say that, i have tried another pool and my reject rate is only 2-3%.
So it has to be somethings wrong with dwarfpool, no offense tho.
I analyzed raw logs of all shares of hundreds users. I spent the day to find out the cause and correct it, now it must work regular. BTW, which cgminer version do you use? Was it compiled or did you make it by yourself? If blob, could you please describe your system and url to download via PM. Thank you! |
|
|
|
Some improvements on DwarfPool ( Anonymous,no registration required) 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password.
Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust! 3. We have deployed a new server in Japan! eredluin.dwarfpool.com For customers from Asia this will be faster than using our European or American server. You should use the closest server to your location for best performance! DwarfPool Quality you can trust!Any plans to promote Grumpy too? to promote the coin is developers' job  on the pool level Grumpy is supported actively DwarfPool Quality you can trust! |
|
|
|
I just wanted to say that, i have tried another pool and my reject rate is only 2-3%.
So it has to be somethings wrong with dwarfpool, no offense tho.
it never happened before, I'll investigate your case right now! |
|
|
|
Im not running verbose mode, or at least i think i do not.
Here are my settings: --scrypt -u B96dmgABs6yVR62ZTEscHLxpo7Cj1ioour -p 1 -o stratum+tcp://erebor.dwarfpool.com:3336 --gpu-platform 0 -d 2 -w 256 -v 1 -I 13 -g 2 -l 1 --gpu-dyninterval 7 --thread-concurrency 8191
I've checked the raw logs. You get ca.19% rejects. Most of them NOT becase of your sent out-of-date results (this is the main reason of rejects generally), but WRONG(!) results. Most often it happens because of bad settins on your cards/miners. As example my own rigs have only 0.2-0.3% rejects on the same server. Please check you options! |
|
|
|
I love Belicoin and One Piece!!!
For some reason im getting tons of rejects on this coin " Share is above target" like 30% Why?
I am mining on dwarfpool.
There are not rejects from pool. It's normal calculate process in the miner. You have to disable "verbose" option |
|
|
|
Some changes on DwarfPool 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust! Profit CalculatorDeployed a new server in Japan! eredluin.dwarfpool.com For users from Asia this will be faster than using our European or American server. You should use the closest server to your location for best performance!DwarfPool Quality you can trust! Profit Calculator |
|
|
|
|
Show Posts
