I was on Asia/Indonesia
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
Please read this FAQ, should help you choose best location. https://www.nicehash.com/index.jsp?p=faq#faqs12 |
|
|
|
Litecoin live stats
Uptime: 1 month
Hashrate: 0h/s
Users: 3
Workers: 9
something is wrong..
Fixed now, sorry for the inconvenience. |
|
|
|
The Antminer S5/S4 will keep the pool shown as Alive using #xnsub on the old URL (new url does not work with #xnsub on all of my miners).
If the price is not met, the pool stays Alive, but does no work and submits no work, and will not failover to the 2nd pool.
SP20 does not have this problem.
I am using Wed Jan 7 14:05:02 CST 2015 Firmware on the S5.
Also tried Wed Apr 15 15:17:03 CST 2015 on the S5.
Tried all Firmware on the S4, same issue.
Leaving them without the #xnsub on the old or new URL works properly and fails over to 2nd pool when price is not met, but no extra nonce subscribe of course.
Thanks for the attention to this issue! Love your site.
Anyone else have this issue for Antminer S4/S5? If not, how did you fix it? Are you using original firmware or optimized by smith (available here: https://www.nicehash.com/index.jsp?p=software#asic)? |
|
|
|
|
We've just recently updated our stratum servers code which improves mining performance for Antminer S5 and similar miners. You should get close to 0% rejects and optimal speed (the same as on other optimal configured pools).
|
|
|
|
We've established two new stratum server entry-points locations: China - Hong Kong and Japan - Tokyo. Take a look at https://www.nicehash.com/index.jsp?p=gstartedAlso, all stratum servers are now even more optimized for better efficiency when mining with modern miners such as AntMiner S5, etc. Thank you for using our service and keep on hashing  |
|
|
|
|
BitGo is having some intermittent issues right now, deposits are coming through a bit slower than usual. We'll keep you updated.
|
|
|
|
telnet works - but connection to the port via the proxy doesnt with usa - but does with eu ...
all settings are exactly the same except for the address prefix ( x15.usa - x15.eu ) ...
go figure ...
#crysx
Therefore we can rule out networking issues. Obviously when you connect to WestHash your miner is put on some orders, providing your miner with some work that it "doesn't like". What kind of software are you using, ccminer or sgminer? What error exactly does your miner gives you? |
|
|
|
Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334
we have the same issue with x15 on our end ... x15.usa stratum - no connect ... x15.eu stratum - is fine ... #crysx Confirmed, .eu works but .usa doesn't. Hmm this should work. Are you using the correct port? Can you please try these commands from Windows command prompt (or Linux shell): telnet 198.11.195.136 3339 telnet 192.155.218.242 3339 And copy paste output or make print-screen (you can send it to support@nicehash.com). |
|
|
|
Good to know you're using ckpool's code, can't go wrong with that. You must have had to make a few modifications to it, though? It only supports bitcoin mining by default doesn't it?
CK's pool code is certainly only BTC - I'm pretty sure Con would just erase all coins other than BTC if he could  . If the folks over at NH are indeed using ckpool and ckdb for pools other than their BTC solo mining operation, then they've absolutely made modifications to it  . True, we did some minor tweaks for Scrypt and X11 support, but none of them that would cause miner not to connect, and we are for sure not blocking anybody or any service - we are happy to work with any service, even our competitors. Glad to see it is working now ... it is always best to manually set initial difficulty for Scrypt. |
|
|
|
I had no idea they had a solo mining pool,
I'm aware of only stratum.nicehash.com and stratum.westhash.com
Also, we only support stratum+tcp, not http or https pools.
Besides this, there should not be any other compatibility issue,
Though nicehash does not follow standards for pools and is likely at fault for any change from the standard that might cause issues. I tend to agree with what they said as I've never found a pool that didn't work with MRR's service. We'll take a look at this ... anyway, we're running ckpool software on solo pools without any modifications, therefore we don't see any reason why this would not work with MRR. Can you please give us some more information: which coin are you mining on solo pool, Bitcoin/Litecoin/Dash? Do you get any error or simply can't connect? And if you can give us some time stamps (in UTC, if possible) when you did try it and it failed? Thanks! |
|
|
|
Why is it impossible to connect to this pool (LTC in my case) through miningrigrentals.com? This is the only pool I've ever run into that won't work with it.
I can connect fine without MRR, but I need it to work with MRR.
Hmm, there are no limitations whatsoever. I suggest you ask MRR if they are using some filters. Thanks! |
|
|
|
Hey guys, xposting this from the Antminer S5 thread:
6 Antminer S5s all running slow on nicehash/westhash and randomly locking up about one a week, sp20s run full speed... any ideas?
I'm running the updated firmware with extranonce enabled from Smit1237, but all 6 of my s5 miners run between 950 and 1050gh/s vs running near 1200gh/s when running on kano.is or a couple of other pools. I've had 4 lockups in the last 5 weeks as well, box is just offline. Cycling power fixes the offline issue.
4 of them are powered via an IBM 2880W PSU with j4bberwock's breakout board, the other two are powered by an EVGA 1300, so power shouldn't be an issue. There's plenty of overhead on the 2880 and some overhead on the EVGA.
Any ideas on how to get them to run at proper speeds on westhash.com? Should I just move them over to another pool and no longer worry about it?
Are you running at default speeds or are you overclocking? This might also be an networking issue, please try connecting to EU stratum server for test: stratum+tcp://sha256.eu.nicehash.com:3334#xnsub |
|
|
|
How I can connect my titan at your new server???..
stratum+tcp://scrypt.eu.nicehash.com:3333/#xnsub#skipcbcheck or stratum+tcp://scrypt.usa.nicehash.com:3333/#xnsub#skipcbcheck |
|
|
|
IMPORTANT notice for sellers (miners): we're switching to new DNS structure for stratum serversHello, To make our service even more scalable as well as future proof for new algorithms and fluctuating hashing power among different algorithms, we've prepared new DNS naming for our stratum servers. Please note that there will be no hard switch to the new naming structure, we are using a soft grace period in which old and new naming coexists, and both, old and new stratum addresses works. Nevertheless, we are asking you to make the following changes to your miner's configurations as soon as possible. The new DNS naming is already active and can be already used. Here are two major changes: 1) westhash.com is being renamed to usa.nicehash.com. This is ONLY true for stratum server addresses, WestHash web interface will still be available at https://www.westhash.com. However, we'll be merging both markets (and later adding also an Asian market) into single web interface in the future updates (of course, still with geographically separated physical locations of servers). 2) Each algorithm is having it's own unique stratum mining DNS address. --- Here is a list for EU location servers (aka NiceHash): scrypt.eu.nicehash.com
sha256.eu.nicehash.com
scryptnf.eu.nicehash.com
x11.eu.nicehash.com
x13.eu.nicehash.com
keccak.eu.nicehash.com
x15.eu.nicehash.com
nist5.eu.nicehash.com
neoscrypt.eu.nicehash.com
lyra2re.eu.nicehash.com
whirlpoolx.eu.nicehash.com
qubit.eu.nicehash.com
quark.eu.nicehash.com And here is a list for USA location servers (aka WestHash): scrypt.usa.nicehash.com
sha256.usa.nicehash.com
scryptnf.usa.nicehash.com
x11.usa.nicehash.com
x13.usa.nicehash.com
keccak.usa.nicehash.com
x15.usa.nicehash.com
nist5.usa.nicehash.com
neoscrypt.usa.nicehash.com
lyra2re.usa.nicehash.com
whirlpoolx.usa.nicehash.com
qubit.usa.nicehash.com
quark.usa.nicehash.com Note that there is no more "stratum" string, the name of the algorithm implies this. Therefore you have to replace the string "stratum" with "[algorithm].eu" or "[algorithm].usa". Essentially you have to delete the string "stratum" and then copy-paste "sha256.eu", "scrypt.eu", "x11.eu", "x13.eu", etc. or for USA location (aka WestHash) "sha256.usa", "scrypt.usa", "x11.usa", "x13.usa", etc. For example, replace: stratum.nicehash.com:3333
stratum.nicehash.com:3334
stratum.nicehash.com:3336
stratum.nicehash.com:3337
... etc. with scrypt.eu.nicehash.com:3333
sha256.eu.nicehash.com:3334
x11.eu.nicehash.com:3336
x13.eu.nicehash.com:3337
... etc. And for USA (aka WestHash) location, replace: stratum.westhash.com:3333
stratum.westhash.com:3334
stratum.westhash.com:3336
stratum.westhash.com:3337
... etc. with scrypt.usa.nicehash.com:3333
sha256.usa.nicehash.com:3334
x11.usa.nicehash.com:3336
x13.usa.nicehash.com:3337
... etc. We HIGHLY RECOMMEND you to use the copy-paste (Ctrl+C, Ctrl+V) function for replacing individual strings instead of typing it manually to avoid typing mistakes - keep in mind that incorrectly typed address will result into dead/inactive pool connection. And we kindly ask you to make these changes until June 15th, 2015. After this date the old naming of stratum servers will be deprecated. Thank you for using our service and hopefully these changes won't cause you too many troubles. If you have any additional questions or troubles with making the required changes, please let us know to support@nicehash.com. Thank you for using our service! -- Kind regards, NiceHash.com
|
|
|
|
IMPORTANT notice for sellers (miners): we're switching to new DNS structure for stratum serversHello, To make our service even more scalable as well as future proof for new algorithms and fluctuating hashing power among different algorithms, we've prepared new DNS naming for our stratum servers. Please note that there will be no hard switch to the new naming structure, we are using a soft grace period in which old and new naming coexists, and both, old and new stratum addresses works. Nevertheless, we are asking you to make the following changes to your miner's configurations as soon as possible. The new DNS naming is already active and can be already used. Here are two major changes: 1) westhash.com is being renamed to usa.nicehash.com. This is ONLY true for stratum server addresses, WestHash web interface will still be available at https://www.westhash.com. However, we'll be merging both markets (and later adding also an Asian market) into single web interface in the future updates (of course, still with geographically separated physical locations of servers). 2) Each algorithm is having it's own unique stratum mining DNS address. --- Here is a list for EU location servers (aka NiceHash): scrypt.eu.nicehash.com
sha256.eu.nicehash.com
scryptnf.eu.nicehash.com
x11.eu.nicehash.com
x13.eu.nicehash.com
keccak.eu.nicehash.com
x15.eu.nicehash.com
nist5.eu.nicehash.com
neoscrypt.eu.nicehash.com
lyra2re.eu.nicehash.com
whirlpoolx.eu.nicehash.com
qubit.eu.nicehash.com
quark.eu.nicehash.com And here is a list for USA location servers (aka WestHash): scrypt.usa.nicehash.com
sha256.usa.nicehash.com
scryptnf.usa.nicehash.com
x11.usa.nicehash.com
x13.usa.nicehash.com
keccak.usa.nicehash.com
x15.usa.nicehash.com
nist5.usa.nicehash.com
neoscrypt.usa.nicehash.com
lyra2re.usa.nicehash.com
whirlpoolx.usa.nicehash.com
qubit.usa.nicehash.com
quark.usa.nicehash.com Note that there is no more "stratum" string, the name of the algorithm implies this. Therefore you have to replace the string "stratum" with "[algorithm].eu" or "[algorithm].usa". Essentially you have to delete the string "stratum" and then copy-paste "sha256.eu", "scrypt.eu", "x11.eu", "x13.eu", etc. or for USA location (aka WestHash) "sha256.usa", "scrypt.usa", "x11.usa", "x13.usa", etc. For example, replace: stratum.nicehash.com:3333
stratum.nicehash.com:3334
stratum.nicehash.com:3336
stratum.nicehash.com:3337
... etc. with scrypt.eu.nicehash.com:3333
sha256.eu.nicehash.com:3334
x11.eu.nicehash.com:3336
x13.eu.nicehash.com:3337
... etc. And for USA (aka WestHash) location, replace: stratum.westhash.com:3333
stratum.westhash.com:3334
stratum.westhash.com:3336
stratum.westhash.com:3337
... etc. with scrypt.usa.nicehash.com:3333
sha256.usa.nicehash.com:3334
x11.usa.nicehash.com:3336
x13.usa.nicehash.com:3337
... etc. We HIGHLY RECOMMEND you to use the copy-paste (Ctrl+C, Ctrl+V) function for replacing individual strings instead of typing it manually to avoid typing mistakes - keep in mind that incorrectly typed address will result into dead/inactive pool connection. And we kindly ask you to make these changes until June 15th, 2015. After this date the old naming of stratum servers will be deprecated. Thank you for using our service and hopefully these changes won't cause you too many troubles. If you have any additional questions or troubles with making the required changes, please let us know to support@nicehash.com. Thank you for using our service! -- Kind regards, NiceHash.com
|
|
|
|
IMPORTANT notice for sellers (miners): we're switching to new DNS structure for stratum serversHello, To make our service even more scalable as well as future proof for new algorithms and fluctuating hashing power among different algorithms, we've prepared new DNS naming for our stratum servers. Please note that there will be no hard switch to the new naming structure, we are using a soft grace period in which old and new naming coexists, and both, old and new stratum addresses works. Nevertheless, we are asking you to make the following changes to your miner's configurations as soon as possible. The new DNS naming is already active and can be already used. Here are two major changes: 1) westhash.com is being renamed to usa.nicehash.com. This is ONLY true for stratum server addresses, WestHash web interface will still be available at https://www.westhash.com. However, we'll be merging both markets (and later adding also an Asian market) into single web interface in the future updates (of course, still with geographically separated physical locations of servers). 2) Each algorithm is having it's own unique stratum mining DNS address. --- Here is a list for EU location servers (aka NiceHash): scrypt.eu.nicehash.com
sha256.eu.nicehash.com
scryptnf.eu.nicehash.com
x11.eu.nicehash.com
x13.eu.nicehash.com
keccak.eu.nicehash.com
x15.eu.nicehash.com
nist5.eu.nicehash.com
neoscrypt.eu.nicehash.com
lyra2re.eu.nicehash.com
whirlpoolx.eu.nicehash.com
qubit.eu.nicehash.com
quark.eu.nicehash.com And here is a list for USA location servers (aka WestHash): scrypt.usa.nicehash.com
sha256.usa.nicehash.com
scryptnf.usa.nicehash.com
x11.usa.nicehash.com
x13.usa.nicehash.com
keccak.usa.nicehash.com
x15.usa.nicehash.com
nist5.usa.nicehash.com
neoscrypt.usa.nicehash.com
lyra2re.usa.nicehash.com
whirlpoolx.usa.nicehash.com
qubit.usa.nicehash.com
quark.usa.nicehash.com Note that there is no more "stratum" string, the name of the algorithm implies this. Therefore you have to replace the string "stratum" with "[algorithm].eu" or "[algorithm].usa". Essentially you have to delete the string "stratum" and then copy-paste "sha256.eu", "scrypt.eu", "x11.eu", "x13.eu", etc. or for USA location (aka WestHash) "sha256.usa", "scrypt.usa", "x11.usa", "x13.usa", etc. For example, replace: stratum.nicehash.com:3333
stratum.nicehash.com:3334
stratum.nicehash.com:3336
stratum.nicehash.com:3337
... etc. with scrypt.eu.nicehash.com:3333
sha256.eu.nicehash.com:3334
x11.eu.nicehash.com:3336
x13.eu.nicehash.com:3337
... etc. And for USA (aka WestHash) location, replace: stratum.westhash.com:3333
stratum.westhash.com:3334
stratum.westhash.com:3336
stratum.westhash.com:3337
... etc. with scrypt.usa.nicehash.com:3333
sha256.usa.nicehash.com:3334
x11.usa.nicehash.com:3336
x13.usa.nicehash.com:3337
... etc. We HIGHLY RECOMMEND you to use the copy-paste (Ctrl+C, Ctrl+V) function for replacing individual strings instead of typing it manually to avoid typing mistakes - keep in mind that incorrectly typed address will result into dead/inactive pool connection. And we kindly ask you to make these changes until June 15th, 2015. After this date the old naming of stratum servers will be deprecated. Thank you for using our service and hopefully these changes won't cause you too many troubles. If you have any additional questions or troubles with making the required changes, please let us know to support@nicehash.com. Thank you for using our service! -- Kind regards, NiceHash.com
|
|
|
|
Any idea what's going on here? For the last 30 minutes, I'm showing 0.0000 BTC/TH/Day pay rate while the site is showing 0.0110/BTC/TH/Day
All my boxes are still showing as mining and handing in shares.
Please send us direct link of your miner stats to support@nicehash.com, we need to know your mining btc address to look into it. |
|
|
|
Dear users, Today we rolled out an exiting feature for hashing power buyers: detailed order information with graph and statistics.  How to properly read information about order? - Interval for all taken measures is 5 minutes. Therefore speed readings at start of order and when order becomes dead or alive will most likely be incorrect.
- Displayed speeds might be in slight discrepancy due to different and/or asynchronized measuring methods.
- Displayed data and chart will auto refresh every 30 seconds.
- Some web browsers may crash occasionally when viewing chart. To avoid this problem, use another web browser (Google Chrome works 100% well).
- Chart data cannot be used as a base to request any sorts of refunds. Due to pay-per-share nature of our payment system, miners are immediately rewarded for each valid share. These rewards are therefore non-refundable because we keep them only as owed balance to miners and not as our funds.
Hopefully these detailed statistics will help you to manage orders even more efficiently. You'll be able to compare speed and statistics with the ones, showed on you selected target (remote) pool. Now you can truly handle each order as you own virtual miner! Thank you for using our system and keep on hashing Kind regards, NiceHash |
|
|
|
What ??
I talked to you many times about that issue . why you answered now ? after 24 days running I spent more than 10 btc renting from nicehash without no reply about my stuck bestshare .
so now my bestshare freezed since last block ( 17,464,448,589.77 ) Okay now what is my real best share and what is high best share until now ?
PrivacyBTC, we never said that best share is freezed. Yes, we've replied to you many times but you're not paying enough attention, please read our answers and replies carefully. Best share was not freezed it's just that it hasn't been reset after the last block was found. However, as you can see, best share is changing, but only if it increases (if you get a higher best share). Please also read "What is Best Share?" at https://solo.nicehash.com/faq.htm. Thanks. |
|
|
|
|
Show Posts
