Anyway to fix the benchmarking issue. I cannot save any benchmarks to my profiles, and for some reason the benchmarks are showing different hashrates on the benchmark than when running. Maybe a way to upload the save to clipboard and use that if it doesnt want to save to the profile.
Which version of Awesome Miner are you running? Can you describe the steps you use to reproduce the issue and more details of what happens? For example, is the hashrate showing up in the "Benchmark result" column? Is the column "Configured hashrate" updated when you clicked the "Save to profile"-button? But when looking at the actual profile later on, it's still the old values? About this error that does not save reference points, it happened to me the other day doing the benchmark of the new HEX protocol. I had to write it down and then add it by hand. I did not give importance, but now that someone claims it, I tell you that it has happened to me too. I'll tell you just so you know that it does not happen to that user alone. |
|
|
|
https://www.dropbox.com/s/gwoax04u7dg5hec/Captura%20de%20pantalla%202018-08-10%20a%20las%207.28.03.png?dl=0Hi @Patrike, I already informed you a few days ago that when mino nichehash, the profit is not shown in real time. If it appears in online services, and it does the switch auto, it is a pain to not see the profit in real time and therefore I do not have the mini profit statistics either. I have waited to install the last update, but it has not been fixed. I ask for your help because I do not know where this fault comes from, even though I look at options I do not see anything that I can affect I keep mining with nicehash and other pools, but it's a pain to not see the profit of nicehash. I have asked in my Telegram group and it only happens to me. Can you check your Awesome Miner log file for connection issues to Nicehash? You can search for: api.nicehash.com Also make sure that in the Options dialog, Online Services section, you don't have any but the default value for Nicehash domain matching: nicehash.com As I do not know what to look for, I leave you a screenshot of the configuration of online services, and I also leave a log for today, where nicehash appears several times, but I do not know if it is good or bad. I do not know if it will influence, I chose Europe on the server. Thanks for the details. For the screenshot, I was thinking of the field "Nicehash domain matching" that is located just a few pixels above your screenshot on the same page. Does that one say exactly the following? nicehash.comThanks @Patrike, it was that, every day a fool learns something new, and today the fool is me. The form was empty, it has been adding nicehash.com and start dialing. What I do not know is how that has been deleted. As always, grateful with your help, that makes the difference between programs, the support is very important, and that is reflected in the forum as well. I am one of those who read the complete forums, and I always have a tab with the forum open to be reading several times a day. A problem less for me. Thanks @patrike |
|
|
|
Documentation updatedThe documentation/support section on the Awesome Miner web site has been improved. The new support pages can be found at https://support.awesomeminer.com/ and everything is now searchable to make it easier to find information. Several of the pages have been updated and the work on improving the documentation will continue. Please let me know if you have any feedback. Later on the support site will also be extended to include a forum where everyone can post feature suggestions and vote for features. Perfect more and new documentation, although I do not have time for Scrypt and apis, it is always good to have everything at hand to consult. A proper forum is the best thing you can do for your product and maintain both the bitcointalk and your own. It will always be easier to find information faster and more help in a forum often visited by the most experts in the program. Of course a great point in favor of the brand. |
|
|
|
https://www.dropbox.com/s/gwoax04u7dg5hec/Captura%20de%20pantalla%202018-08-10%20a%20las%207.28.03.png?dl=0Hi @Patrike, I already informed you a few days ago that when mino nichehash, the profit is not shown in real time. If it appears in online services, and it does the switch auto, it is a pain to not see the profit in real time and therefore I do not have the mini profit statistics either. I have waited to install the last update, but it has not been fixed. I ask for your help because I do not know where this fault comes from, even though I look at options I do not see anything that I can affect I keep mining with nicehash and other pools, but it's a pain to not see the profit of nicehash. I have asked in my Telegram group and it only happens to me. Can you check your Awesome Miner log file for connection issues to Nicehash? You can search for: api.nicehash.com Also make sure that in the Options dialog, Online Services section, you don't have any but the default value for Nicehash domain matching: nicehash.com As I do not know what to look for, I leave you a screenshot of the configuration of online services, and I also leave a log for today, where nicehash appears several times, but I do not know if it is good or bad. I do not know if it will influence, I chose Europe on the server. |
|
|
|
You have thought about offering this service to third parties. You just have to make a website to sign up and add the API, and a recurring monthly payment from Paypal, I would pay $ 10 a month for having such statistics, and I know people from my telegram group who would also pay for that service.
You can offer a subdomain for each client only accessible by login. For me, it would be something that I have been looking for a long time. Only the number of switch changes per day in each machine would be missing.
I work as a full time back end web developer so I don't have a lot of time left but I will consider it. The number of switch changes is actually something I am working on. I am going to implement a timeline showing what each rig is mining, how many swaps there are etc. I have been logging all this info to my DB, I just need to write the front end graphs. WOW so you already have the knowledge for your work, it's just a lack of time. I think you have a great business opportunity here, you could pay from paypal or even with cryptos. But what you have is a great lack of AM. I'm used to working with multiple bots in the field of black Seo link building, and I'm used to paying for extra services (elite proxies, cache solvers, list of sites to put links, text spins etc ...), no I always pay that the service is good, and what is seen in their statistics is simply magnificent, it is a great job. Presumably, once you have everything done for you, in the absence of the number of auto switch changes, you should only focus on the front end of the page offering the service, an administration, a payment gateway and a self management of users .. Think about it well because there are thousands of AM licenses, and many of us are crazy about having this kind of reports that you have done with such expertise. |
|
|
|
Awesome Miner Version 5.3.10 (Development preview of 5.4)- Miner Tag trigger can be configured to trigger if a miner doesn't have the specified tag - The profit switcher can be configured to ignore the current pool if the mining software crashed multiple times. Configurable via the Options dialog, Profit switching section. - Improved threading performance when using larger number of miners and when executing commands on many miners at once - Webhook actions can be configured for Basic Authentication - WhatToMine custom URL's can point to sources with multiple coins - Added execution option to run external commands as Administrator via the System tab - Added option to reinitialize the GPU monitoring via the System tab - Coins tab improved by separating Revenue and Profit into two separate columns that can be sorted individually - Ensure miner hostnames cannot contain blank spaces - Added variable support for webhook actions - Disable MultiPool.us integration - Zpool multiple region support - Added YescryptR16 and Allium algorithms, including support in CpuMiner-Opt - Use full paths when specifying configuration file to sgminer
- Improved support for custom mining software with download URL specified as part of profit profiles
- The download URL for mining software adds support for pointing to network file shares.
- Cloud Services update inteval configurable
- For Managed Profit Miners, only the active pools will be listed on the Pools tab.
- Removed old mining software: Excavator 1.1. The only supported versions from now on are Excavator 1.4 and 1.5.
- Added mining software: T-Rex nVidia GPU Miner
- T-Rex miner 0.5.6, including pool information when used as External Miner - CryptoDredge 0.8.3
- Z-enemy Miner 1.15a with Hex algorithm support
- EWBF Equihash Miner 0.5 - SRBminer 1.6.5, including CryptoNight Red algorithm - Correction to coins per day calculations for some algorithms like Blake 2b - Correction to SRBMiner configuration file entries related to GPU settings - Correction to hash rate for latest firmware versions of Innosilicon A9 Zmaster miner. If an older firmware is used for this miner, please upgrade to the latest firmware version. - Correction to the content of the miner and pool notification messages if the mining process doesn't start correctly - Correction to miner commands not being executed correctly if launched in a sequence via the rules - Correction to incorrect display of first pool in list for some GPU mining software - Correction to rule for executing SSH commands - Correction to hashrate parsing for a few of the GPU mining software, where incorrect processing could result in no mining information being displayed - Minor corrections Items in blue are updated since the last development preview. To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates Direct download links http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msihttp://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi https://www.dropbox.com/s/gwoax04u7dg5hec/Captura%20de%20pantalla%202018-08-10%20a%20las%207.28.03.png?dl=0Hi @Patrike, I already informed you a few days ago that when mino nichehash, the profit is not shown in real time. If it appears in online services, and it does the switch auto, it is a pain to not see the profit in real time and therefore I do not have the mini profit statistics either. I have waited to install the last update, but it has not been fixed. I ask for your help because I do not know where this fault comes from, even though I look at options I do not see anything that I can affect I keep mining with nicehash and other pools, but it's a pain to not see the profit of nicehash. I have asked in my Telegram group and it only happens to me. |
|
|
|
Hi all, Just thought I would show off the web interface I made for Awesome Miner: http://stats.finnsk3.com/It uses the Awesome Miner API along with Nvidia-SMI and and API to my enphase solar controller. I am also using a CLI based overclocking tool I wrote in C to apply my overclocks as I hate msi ab. That's the public view, as I am authenticated I see stop,start,restart,reboot,set TDP,set overclocks buttons. The rigs are all on TPLink HS100/HS110 smart power points and the interface monitors the rigs and if they are unreachable for 5minutes it turns the power point off, waits 30 seconds then turns it back on. All the rigs are set in bios to boot on power outage. I have onpeak/offpeak power costing so during week days for 8 hours a day my power costs twice as much so my TDP limits are automatically heavily restricted during peak power cost. When any of my 1080ti rigs start mining Ethereum it automatically launches the ethenlargement pill and closes it if they stop mining Eth. If I launch discord or a game etc. on my main rig my monitoring script stop the rig from mining, set's my 1080tis TDP to 350w and sets my gaming clocks, resumes mining when I exit all games. Scripts running on my server:  Now you have something to aim for Awesome Miner devs  You have thought about offering this service to third parties. You just have to make a website to sign up and add the API, and a recurring monthly payment from Paypal, I would pay $ 10 a month for having such statistics, and I know people from my telegram group who would also pay for that service. You can offer a subdomain for each client only accessible by login. For me, it would be something that I have been looking for a long time. Only the number of switch changes per day in each machine would be missing. |
|
|
|
https://www.dropbox.com/s/vz70h4vxrxhjekp/Captura%20de%20pantalla%202018-08-07%20a%20las%2021.32.54.png?dl=0I have a little problem, which must be my fault, because nobody else in the telegram group happens to him. If you look at the capture you will see that the rig4 is undermining Nicehash, but it does not mark profit, down in the console you see that everything is correct, and if I go to the nicehash page it detects everything well and gives me the benefits. It happens to me in all the miners, and only happens to me with Nicehash, in the other Pools if it marks the profit of what I am undermining. I've been asking my telegram colleagues and asking about the options and I have not seen anything wrong. I have even added cryptodredge 0.8.3 the latest version to AM and nothing, I still can not see the profit of the mined in nicehash in real time. I'm using an external Nicehash address, I've also used the BTC address that gives me nicehash when you login, it just does not work. It's very strange ... any advice? Could it be by cryptodredge? Is it the same issue if you look on the Online Services tab, as this is the data Awesome Miner uses to calculate the profit during mining? Is Nicehash showing any profit for Lyra2z? Are any Nicehash algorithms showing up correctly on the Online Services tab?
That's the weird thing, that in online services the profit appears correctly, but not when it is mined. It even makes changes to the Auto switch because it is based on service onlines. But when I'm mining it does not appear.
It does not matter what miner you use, cryptodredge or zenemy, it does not matter, it just does not appear. I have reviewed all the options in Options, and it only happens with nicehash, they are of these rare errors that you do not know where to start.
I hope that in the next update it will be fixed alone, or I hope so, I recognize that it is something quite strange and curious.
I leave another capture where you will see some miners with nicehash with 00, and with zpool that marks correctly
[url]https://www.dropbox.com/s/eef2zhs8dl9gr2w/Captura%20de%20pantalla%202018-08-08%20a%20las%2012.23.15.png?dl=0]https://www.dropbox.com/s/7ayq7qjk5d5mxye/Captura%20de%20pantalla%202018-08-08%20a%20las%2012.19.21.png?dl=0/url]
That's the weird thing, that in online services the profit appears correctly, but not when it is mined. It even makes changes to the Auto switch because it is based on service onlines. But when I'm mining it does not appear.
It does not matter what miner you use, cryptodredge or zenemy, it does not matter, it just does not appear. I have reviewed all the options in Options, and it only happens with nicehash, they are of these rare errors that you do not know where to start.
I hope that in the next update it will be fixed alone, or I hope so, I recognize that it is something quite strange and curious.
I leave another capture where you will see some miners with nicehash with 00, and with zpool that marks correctly
[url]https://www.dropbox.com/s/eef2zhs8dl9gr2w/Captura%20de%20pantalla%202018-08-08%20a%20las%2012.23.15.png?dl=0 |
|
|
|
And another question...
Does the "Profit switch threshold" also apply when switching between pools on the same algo?
Thanks,
...jim
Yes |
|
|
|
https://www.dropbox.com/s/vz70h4vxrxhjekp/Captura%20de%20pantalla%202018-08-07%20a%20las%2021.32.54.png?dl=0I have a little problem, which must be my fault, because nobody else in the telegram group happens to him. If you look at the capture you will see that the rig4 is undermining Nicehash, but it does not mark profit, down in the console you see that everything is correct, and if I go to the nicehash page it detects everything well and gives me the benefits. It happens to me in all the miners, and only happens to me with Nicehash, in the other Pools if it marks the profit of what I am undermining. I've been asking my telegram colleagues and asking about the options and I have not seen anything wrong. I have even added cryptodredge 0.8.3 the latest version to AM and nothing, I still can not see the profit of the mined in nicehash in real time. I'm using an external Nicehash address, I've also used the BTC address that gives me nicehash when you login, it just does not work. It's very strange ... any advice? Could it be by cryptodredge?
|
|
|
|
Something like that would be perfect, I miss the number of changes made by each miner, to see if they are few or many. Everything else perfect.
Something like that I hope some day Patrike will develop it, because we have a great program with a thousand possibilities, but many of them escape us due to lack of information. A panel like that tells you how bad and good it is, it makes you make better decisions, you see if a new strategy is more profitable than another, in short, I see it as the great lack of Awesome Miner, a lot of power without control.
The main thing I found is AM is lacking the ability to report trends. The first thing I did when I started working on my stats page was query AwesomeMiner and log everything of interest to a database every minute. This means I can do easy trend analysis. It also helps when I walk up in the morning and I see a bunch of rigs had gone done and I can see what miners have been causing rigs to hardlock or bsod rather than just having no idea what it has been mining. I plan to add a timeline of what is being mined during the day, I have the data in my database I just need to write the display code. I also want to overlay stats like when a miner goes down etc. Another thing I do is scale TDP limits depending on profit. As profits go up I automatically increase the TDP limit as I don't care if it's burning more power if it's making a lot of profit. You can not do more than external and put it in a mysql in a domain and a VPS server. But the same or very similar could be added to AM, an internal database to record the data and then display it in local HTML 127.0.0.1 I just have to congratulate you on your panel, it's fantastic. |
|
|
|
Hi all, Just thought I would show off the web interface I made for Awesome Miner: http://stats.finnsk3.com/It uses the Awesome Miner API along with Nvidia-SMI and and API to my enphase solar controller. I am also using a CLI based overclocking tool I wrote in C to apply my overclocks as I hate msi ab. That's the public view, as I am authenticated I see stop,start,restart,reboot,set TDP,set overclocks buttons. The rigs are all on TPLink HS100/HS110 smart power points and the interface monitors the rigs and if they are unreachable for 5minutes it turns the power point off, waits 30 seconds then turns it back on. All the rigs are set in bios to boot on power outage. I have onpeak/offpeak power costing so during week days for 8 hours a day my power costs twice as much so my TDP limits are automatically heavily restricted during peak power cost. When any of my 1080ti rigs start mining Ethereum it automatically launches the ethenlargement pill and closes it if they stop mining Eth. If I launch discord or a game etc. on my main rig my monitoring script stop the rig from mining, set's my 1080tis TDP to 350w and sets my gaming clocks, resumes mining when I exit all games. Scripts running on my server: Now you have something to aim for Awesome Miner devs Something like that would be perfect, I miss the number of changes made by each miner, to see if they are few or many. Everything else perfect. Something like that I hope some day Patrike will develop it, because we have a great program with a thousand possibilities, but many of them escape us due to lack of information. A panel like that tells you how bad and good it is, it makes you make better decisions, you see if a new strategy is more profitable than another, in short, I see it as the great lack of Awesome Miner, a lot of power without control. |
|
|
|
|
- Added variable support for webhook actions
@patrike I do not understand that function or how to use it, I could explain it and give me an example of use. Surely it will be of interest to more people.
Thank you
|
|
|
|
The first pool is sometimes listed incorrectly with some GPU mining software on development version 5.3.5. I'm working on a correction for this right now.
Update: Development version 5.3.6 is now available. For those running into this pool issue, please upgrade to the latest version. Thanks!
THX soo fix bug. I've worked out the quick fix solution, the change of pool names and protocols, and now if it's correct, it happened continuously, or you notice or you do not notice. Now it's perfect I still have the other problem, 0 0 0 0 0 using t-rex in some rigs, I have gone to the system and restarted the monitoring and it remains the same, I do not know if it will be another option. Thanks for the update. When selecting this miner and looking at the System tab at the bottom of the screen, is it no GPU's showing or GPU's with 0 C in temperature? I finally understood it. Thank you, that's silly ...... Everything is working, thanks for your patience, I hope this will help more people https://www.dropbox.com/s/0ti1k0crnxf3svk/Captura%20de%20pantalla%202018-07-30%20a%20las%2023.07.04.png?dl=0In the main panel where we always look, you see 0 0 0 0 0, but below in the System tab you can see the temperatures perfectly. On the GPU tab for this miner, isn't the "Map to system monitoring" enabled or working? Is the temperature still 0 for all GPU's in the list? I finally understood it. Thank you, that's silly ...... Everything is working, thanks for your patience, I hope this will help more people |
|
|
|
|
- WhatToMine custom URL's can point to sources with multiple coins
this point of the update I do not get to understand well, I could put an example or an explanation, I do not know how to point to several currencies in WTM.
Maybe it's more than one call per line?
|
|
|
|
What madness is happening ... Another update for failures in the control of the miners, say one thing undermine another.
But now I'm having problems with Aftherburner server. Everything was fine, but due to one of these updates does not work.
A user in this forum already told me that the only way is to change the name of the folder where the Aftherburber Server is, change the rule that starts it and change the folder in the AW configuration. I have only 5 platforms, but whoever has more is a terrible mess.
Every so often the aftherburner server stops working (every 2 or 3 weeks, usually after the update) and I have to change everything in all the rigs again.
I hope that over time Patrike will develop a tool to control OC, because today I have several Rigs turned off due to overheating, thank goodness I have rules set to stop the equipment and not break. But it does not seem right that every few days I have to change the folder in AW, in each rig, the task scheduler to start it etc ...
Crazy this sometimes, the supposed time that is saved in AW, is spent on its maintenance over and over again.
Please favor a more stable solution to control the OC without relying on external programs that fail.
I understand your reasons, it must be really complicated and long to develop a single module of OC. Nvidia inspector I have never used it, but I would not like it if it were for command lines, because then the OC selector in each protocol profile does not make sense, it would lose comfort and speed when imposing OC I do not know if you can get this problem to the creator of MSI SERVER, is that it is not normal that every so often you have to change the folder and all that mess. Or look for a solution or patch to solve this problem when it happens. I really like Msi server, but I do not like what it fails when it wants. Are you sure that when aftherburner server does not work when it did before, surely there is no trick or change in the Rededit that solves it? What I mean, maybe you can find a way to correct it in case of failure and we Say how, without having to change the route and the task scheduler Thank you for your response and thanks for making 3 updates today, this is where you see how committed a programmer is to your project. In other programs you have to wait days or weeks when there is a failed update. An idea, you can make the latest version and the previous one stable on your website, so in these cases you can go back in the version. Honestly what I hope most is to have more statistics, we are very blind and we do not know what is happening, what we earn, what is bothering us, there is simply no information, this would be important for me. regards |
|
|
|
The first pool is sometimes listed incorrectly with some GPU mining software on development version 5.3.5. I'm working on a correction for this right now.
Update: Development version 5.3.6 is now available. For those running into this pool issue, please upgrade to the latest version. Thanks!
THX soo fix bug. I've worked out the quick fix solution, the change of pool names and protocols, and now if it's correct, it happened continuously, or you notice or you do not notice. Now it's perfect I still have the other problem, 0 0 0 0 0 using t-rex in some rigs, I have gone to the system and restarted the monitoring and it remains the same, I do not know if it will be another option. Thanks for the update. When selecting this miner and looking at the System tab at the bottom of the screen, is it no GPU's showing or GPU's with 0 C in temperature? In the main panel where we always look, you see 0 0 0 0 0, but below in the System tab you can see the temperatures perfectly. |
|
|
|
|
What madness is happening ... Another update for failures in the control of the miners, say one thing undermine another.
But now I'm having problems with Aftherburner server. Everything was fine, but due to one of these updates does not work.
A user in this forum already told me that the only way is to change the name of the folder where the Aftherburber Server is, change the rule that starts it and change the folder in the AW configuration. I have only 5 platforms, but whoever has more is a terrible mess.
Every so often the aftherburner server stops working (every 2 or 3 weeks, usually after the update) and I have to change everything in all the rigs again.
I hope that over time Patrike will develop a tool to control OC, because today I have several Rigs turned off due to overheating, thank goodness I have rules set to stop the equipment and not break. But it does not seem right that every few days I have to change the folder in AW, in each rig, the task scheduler to start it etc ...
Crazy this sometimes, the supposed time that is saved in AW, is spent on its maintenance over and over again.
Please favor a more stable solution to control the OC without relying on external programs that fail.
|
|
|
|
The first pool is sometimes listed incorrectly with some GPU mining software on development version 5.3.5. I'm working on a correction for this right now.
Update: Development version 5.3.6 is now available. For those running into this pool issue, please upgrade to the latest version. Thanks!
THX soo fix bug. I've worked out the quick fix solution, the change of pool names and protocols, and now if it's correct, it happened continuously, or you notice or you do not notice. Now it's perfect I still have the other problem, 0 0 0 0 0 using t-rex in some rigs, I have gone to the system and restarted the monitoring and it remains the same, I do not know if it will be another option. |
|
|
|
|
Show Posts
![That's the weird thing, that in online services the profit appears correctly, but not when it is mined. It even makes changes to the Auto switch because it is based on service onlines. But when I'm mining it does not appear.It does not matter what miner you use, cryptodredge or zenemy, it does not matter, it just does not appear. I have reviewed all the options in Options, and it only happens with nicehash, they are of these rare errors that you do not know where to start.I hope that in the next update it will be fixed alone, or I hope so, I recognize that it is something quite strange and curious.I leave another capture where you will see some miners with nicehash with 00, and with zpool that marks correctly[url]https://www.dropbox.com/s/eef2zhs8dl9gr2w/Captura%20de%20pantalla%202018-08-08%20a%20las%2012.23.15.png?dl=0]https://www.dropbox.com/s/7ayq7qjk5d5mxye/Captura%20de%20pantalla%202018-08-08%20a%20las%2012.19.21.png?dl=0/url]That's the weird thing, that in online services the profit appears correctly, but not when it is mined. It even makes changes to the Auto switch because it is based on service onlines. But when I'm mining it does not appear.It does not matter what miner you use, cryptodredge or zenemy, it does not matter, it just does not appear. I have reviewed all the options in Options, and it only happens with nicehash, they are of these rare errors that you do not know where to start.I hope that in the next update it will be fixed alone, or I hope so, I recognize that it is something quite strange and curious.I leave another capture where you will see some miners with nicehash with 00, and with zpool that marks correctly[url]https://www.dropbox.com/s/eef2zhs8dl9gr2w/Captura%20de%20pantalla%202018-08-08%20a%20las%2012.23.15.png?dl=0](https://www.dropbox.com/s/7ayq7qjk5d5mxye/Captura%20de%20pantalla%202018-08-08%20a%20las%2012.19.21.png?dl=0/url){kind=link}
