What is the price point for this (also got an email about it)?
if you have interest, send a mail to peicaili@gmail.com |
|
|
|
|
Hello, everyone!
One of our customer have placed a huge order for A2 terminator-90M and thus get very good discount on the price, and thus if anyone want to buy A2 terminator-90M, we can add you order into this huge order, then you can use the same price as him. So if you have interest, please reply this mail.
BTW, this huge order will proceed within the next 2-3 days, you need be quick if you want to buy
|
|
|
|
I have an email from someone claiming to be peicalili@gmail.com regarding some 1T Dragons that are for sale. Can anyone confirm if this is legit? yeah it is me An usa customer bought 64 units on 5 May from me, and want to sell 47 unit now, because he find out it is too much for his data center and he even want to ship them back to china and let me host them i said since you have shipped them to usa why you just sell them in usa then i can buy some new for you and host in china then he agree to set the price as 1500$, and i write a mail to all customer in my mail list to let all loyal customer get this good deal first the deal is true, sorry for the delay of explaining here , i am planed to post here if some units left, but most of them are ordered by now.. |
|
|
|
Note I am philipma1957 and on my second account as my primary pc is off line. This pc only does this account
How much is hosting fee for a Dragon 1T per month?
What is included in the hosting plan?
You offer different hosting plans?
This is a quote from page 34 by pcfli it shows a good explanation of differences of hosting and pricing. As far as price for unit of dragon it's on the first page of thread. updated on 27 May 2014Hello, every one, since the dragon 1T bitcoin miner can't mining as much as before with the increased difficulty, the 225$ host fee seems more and more expensive. To provide better service and save your guys money, we have co-operated with a new simple data center, where the electricity is very cheap and we can set the host fee for each dragon miner as 150$ each miner each month. however, because it is not a professional data center like we current use, the warranty will be also limited 1) we only promise that the offline time will not exceed 24 hours each month 2) you can only use eliguis pool. 3) no remote access to the miner Currently we have 12 unit in this simple data center and you can check the detail of the miner through the following link http://eligius.st/~wizkid057/newstats/userstats.php/131gBm2SsBjWBLePCVQpSB4gYwbA7e9vS1and see the worker detail by clicking the tag "toggle display of worker details" if you want to buy one such miner, just tell me which worker you want to pick and give me your btc address, then we will point it to your btc address on eligius pool, the price of one 1T dragon miner is 1850$ in this miner, but we promise to switch to your pool within 24 hours(usually only need 1-4 hours on work day)and you need pay three month host fee in advance.  Thanks for information. Price is too much for both hosting plans. okay you think he charges to much to host correct? Show me a better deal on this site for 1th hosted. There is no better deal that I can find. Go to the top of this thread the 1th machine costs 1699 usd for 1 th pay to host up front on the cheap plan 3x 150 = 450. so that is 2150 usd for 1th. 90 days paid up hosting. full warranty on the machine, find cheaper on this site please. and while I am at this. show me one with an option for paypal with a 4% fee. or a grand total of $2246.75 for 90 days of hosting and you own the machine. While I am at it 45 day paypal protection and if you use a cc to fund the paypal 60 days protection or more. Now 2246 usd may not make a profit after 90 days. but you only have btc price risk to worry about. If you have a better deal show it to us. You are right the price is good and acceptable for both hosting plans. Better I had written. "Price is for me too much." yes that makes sense and for me waiting the extra time make me not want to do it. The last one I did with him I was hashing in 2 hours of payment. sorry on this issue, we have a little delay on building, otherwise the new professional data center will be ready 10 days ago, it is not easy to build a data center which can support as much as 200+ unit, we need design electricity and temperature control system...we have spent more than 20,000 dollar on the simple data center as for the new professional one, the government spend 1,500,000$ to build it, which is supposed to host website server, but they canot find enough server to fill it and thus give us an opportunity to host miner, but it still cost us more than 30,000 to get it ready. |
|
|
|
SF-28M, SF-70M - what chip?
it used SF chip  |
|
|
|
thanks for the support and the price of host fee on the professional data center will adjust to 185$ and the price on simple data center will adjust to 135$, but currently, there is no place to place new host order, but the new simple data center will ready within one week and new professional data center will ready within 2-3 weeks here is the new host price table  nice a good deal just got better. I am getting ready to order my second 1 th hosting in just a little bit. Edit: So If I order today with the professional data center. I send a paypal for 1699 + 4% fee that is 67.96 a grand total of 1766.96. I fill the form out. So when does it mine? 24 hours or less? I then need to pay the hosting fee of 185 usd on what day? the old professional data center in gao you is currently full of miners and the new professional data center is not ready to run miner, so basically it is no room for host miner but the simple data center in xuzhou will be ready within one week then i will have plenty room to accept miner |
|
|
|
thanks for the support and the price of host fee on the professional data center will adjust to 185$ and the price on simple data center will adjust to 135$, but currently, there is no place to place new host order, but the new simple data center will ready within one week and new professional data center will ready within 2-3 weeks here is the new host price table |
|
|
|
|
yes, in this case, i usually suggest the customer to buy a new one, and tell me the cost, and i will set a special discount for you when you place the next order
|
|
|
|
|
it is strange, the factory does promise to replace the psu for free, but you need cover the shipment fee, which may even more expensive than you buy a new psu...
|
|
|
|
reserve for use  |
|
|
|
Look at the bottom picture, beside the 2 pci-e connectors, you can see 1 motherboard cable, 1×4+4 cable and 1×8 pin cable.
The cable with the 8 pin is powering 2 modules via an adapter with 2 pci-e connectors. This can not be seen on this picture. I have seen this somewhere, just need to search for that picture again.
Mr. Lee probably switch the better PSU for a cheap one and sold the good ones somewhere else.
I can promise you that is not being done. If the ATX PSU shown on the above picture is rated 1000W (or thereabouts) which is supposed to power these 1T Dragon miners, then why does it only have 2 dedicated modular PCIe output ports. Typical ATX PSUs with only 2 dedicated PCIe connectors are in the 500W-650W range. How could this be a kilowatt ATX PSU then? Please explain. sorry i dont know the detail, but the thing i want to say is most of the miner i sell are shipped out directly from factory Then perhaps it is about time that you clarify it with your factory and then post the PSU's specifications on here. I don't think it's fair for you to lead your customers on and make them think that they are getting an appropriate PSU in each Dragon miner when they are not. Your account description says, "honest re-seller of T level miner from china". Then make it so. I'm reasonable so I'm giving you the benefit of the doubt. However, I must state that being honest is not the same as playing "oblivious". sorry to be honest, i just need to specify anything i know So, you're telling me that you don't know anything about what you are actually selling on here? Why can't you get the PSU specifications from your factory and publish it here? I will try to figure it out and update here |
|
|
|
updated on 8 Jun 2014 two scrypt miner are added on our product list, it is cheap and stable, enjoy it
|
|
|
|
hi pcfli
It is a psu problem it will run 2 blades but not 3 or 4.
What can you do for me as the miner arrived from you about 3 and a half weeks ago so its still kinda new
these things happen a lot in summer, the power consumption will increase with temperature, i guess your room is a little too hot... |
|
|
|
Look at the bottom picture, beside the 2 pci-e connectors, you can see 1 motherboard cable, 1×4+4 cable and 1×8 pin cable.
The cable with the 8 pin is powering 2 modules via an adapter with 2 pci-e connectors. This can not be seen on this picture. I have seen this somewhere, just need to search for that picture again.
Mr. Lee probably switch the better PSU for a cheap one and sold the good ones somewhere else.
I can promise you that is not being done. If the ATX PSU shown on the above picture is rated 1000W (or thereabouts) which is supposed to power these 1T Dragon miners, then why does it only have 2 dedicated modular PCIe output ports. Typical ATX PSUs with only 2 dedicated PCIe connectors are in the 500W-650W range. How could this be a kilowatt ATX PSU then? Please explain. sorry i dont know the detail, but the thing i want to say is most of the miner i sell are shipped out directly from factory Then perhaps it is about time that you clarify it with your factory and then post the PSU's specifications on here. I don't think it's fair for you to lead your customers on and make them think that they are getting an appropriate PSU in each Dragon miner when they are not. Your account description says, "honest re-seller of T level miner from china". Then make it so. I'm reasonable so I'm giving you the benefit of the doubt. However, I must state that being honest is not the same as playing "oblivious". sorry to be honest, i just need to specify anything i know |
|
|
|
help please
my dragon is not mining
It powers up the fans come on the green leds flash for a while then the fans stop and the green leds stop flashing
But I can log into the machine and get into the real time monitoring which shows the blades as alive but just not doing anything
The running log just shows all zero's
I have tried turning off waiting a couple of minutes then turning back on and starting and stopping with no change
Any ideas
maybe the psu problem, get off one blade and to see whether it works |
|
|
|
Look at the bottom picture, beside the 2 pci-e connectors, you can see 1 motherboard cable, 1×4+4 cable and 1×8 pin cable.
The cable with the 8 pin is powering 2 modules via an adapter with 2 pci-e connectors. This can not be seen on this picture. I have seen this somewhere, just need to search for that picture again.
Mr. Lee probably switch the better PSU for a cheap one and sold the good ones somewhere else.
I can promise you that is not being done. If the ATX PSU shown on the above picture is rated 1000W (or thereabouts) which is supposed to power these 1T Dragon miners, then why does it only have 2 dedicated modular PCIe output ports. Typical ATX PSUs with only 2 dedicated PCIe connectors are in the 500W-650W range. How could this be a kilowatt ATX PSU then? Please explain. sorry i dont know the detail, but the thing i want to say is most of the miner i sell are shipped out directly from factory |
|
|
|
The front panel  |
|
|
|
|
Show Posts
