ego kit 1100mah li ion battery case and ce4 atomizer only 2000 maryj on cointopay limited time only so get them while you can at this price.
Quite a deal. I got a 500 error when I tried to checkout. Something went wrong in the transaction process. Some potential reasons: Daemon is down or you are using an Autonomy account with an unconfigured wallet. We sent an email to support with the issue description - X003. /MerchantAPI website sent me word they fixed the issue and you can checkout now Then they lied.  Still getting the same error. |
|
|
|
ego kit 1100mah li ion battery case and ce4 atomizer only 2000 maryj on cointopay limited time only so get them while you can at this price.
Quite a deal. I got a 500 error when I tried to checkout. Something went wrong in the transaction process. Some potential reasons: Daemon is down or you are using an Autonomy account with an unconfigured wallet. We sent an email to support with the issue description - X003. /MerchantAPI |
|
|
|
|
It looks like we're running and I'm staking normally now. I had to send all of my coins to another address to get them staking again. They didn't stake for over 24 hours before sending them. Once sent they staked in about 5 hours (3 to mature and 2 to gain weight.) I'm guessing the coins had not staked in about 2 1/2 months before, and somehow either the weight was to big or the time to old to let them stake. Now that there fresh, we're golden.
Hope everyone else can get up and running.
current block is 421386
|
|
|
|
|
Has anyone actually staked now that the blockchain is back? I've be connected for about 12 Hr's but so far no stakes.
|
|
|
|
I am currently at 41979 blocks. I do hope this is correct. Unlocked and ready for staking.
I hope you missed a digit somewhere. I'm at 419089 I've been ready for staking but so far nothing. The blockchain is moving, I'm just not staking. Wallet says expect a stake in 2 minutes. My weight is almost 1/2 the network weight. I'm not sure if this is like some other wallets that just guess at these things. Let wait and see... So far So good... |
|
|
|
Here's the official release : https://mega.co.nz/#!kxhBTK6I!z8s97c7iM0rorX9XEXIFT5-sTAqGAQmv4Pm1zQpac8k Config file is already included, just save your wallet data, delete your roaming folder, load the newly downloaded roaming into its place and then open the 1.2 qt and everything should be 100% working. Let me know how it goes. For some reason, I started the first one you sent. It's synced, and the block chain is moving. I'm upto the same block as reported by that node website. The wallet is 1.2, and it looks like I'm on the right fork. So I should be OK. Let me know if I need to down load this new stuff. The coins I sent show 60 confirms. |
|
|
|
everyone download this : https://mega.nz/#!LJUHTBZK!9WxbJvbEuf5lcso-Ma2c5JMM9CXlmiT8PDH_bLeP4P4 This will have two folders in it, one being the MaryJane roaming folder, the other has the v1.2 qt The roaming folder has the "correct" blockchain already in it, so it should get everyone on the same chain once you delete your old maryjane roaming folder Don't forget to add the config file in the roaming folder, should look like this : rpcuser=x rpcpassword=y server = 1 listen = 1 daemon = 1 port = 11080 addnode=194.135.90.5 addnode=194.135.90.81 then save as "maryjanecoin.conf" , make sure you arent saving as a text document, make sure when you save it the file type will read all files not just txt Link doesn't work |
|
|
|
Your's worked fine. Personally I don't trust anything not from a trusted source. His may be perfectly fine, but I still wouldn't download till you or MaryJ said it was OK. I was able to sync instantly with yours. It's just not moving along. Not sure how to give it a kick start... |
|
|
|
This bot has many advanced strategies. Anyway I would like to see a bot who can change the client seed.
This one can. |
|
|
|
Downloaded new stuff. I'm connected and wallet is unlocked for staking. I'll give it a little while to see if anything happens if nothing, I'll take a peek at the debug.log file.
send me a couple coins - MAF6Gi4xSTJBqtJ7qL3C222oepxdumg6X1 I just sent you a couple. There sent but unconfirmed. We await your next move... |
|
|
|
|
Downloaded new stuff. I'm connected and wallet is unlocked for staking. I'll give it a little while to see if anything happens if nothing, I'll take a peek at the debug.log file.
|
|
|
|
Okay lets try this, everyone download this : https://mega.nz/#!LJUHTBZK!9WxbJvbEuf5lcso-Ma2c5JMM9CXlmiT8PDH_bLeP4P4 This will have two folders in it, one being the MaryJane roaming folder, the other has the v1.2 qt The roaming folder has the "correct" blockchain already in it, so it should get everyone on the same chain once you delete your old maryjane roaming folder Don't forget to add the config file, should look like this : rpcuser=x rpcpassword=y server = 1 listen = 1 daemon = 1 port = 11080 addnode=194.135.90.5 addnode=194.135.90.81 then save as "maryjanecoin.conf" , make sure you arent saving as a text document, make sure when you save it the file type will read all files not just txt AND MAKE SURE YOU SAVE YOUR wallet.dat file, and make a backup just to be safe. |
|
|
|
i cant sync with these nodes, i have 9 connection to network, but no sync Sad
addnode 194.135.90.5
addnode 194.135.90.81
sync stoped at block 4320 from 389404
where is the problem?
You could try stopping and restarting the wallet. I had to do that several times to get it going. But, I wouldn't waste your time, until they figure out which fork is the right one. The one I'm trying now is 418723 and appears to be the longest. The only problem is I haven't seen it move in several hours, which makes me nervous. So I would just hold on till someone says "This is the blockchain we should all be on" |
|
|
|
Just wondering... how are people logging into JD on build 12? or any of the v3 builds? I can log into PD with no problem but JD seems to freeze up for about a minute and then posts the message box "Failed to log in or register new account!" But I'm entering the credentials precisely and it works anywhere else.
thx for any help.
Did you select the site you're logging in to in the top left menu? There's an item called Site with the selected site in brackets behind it. Just expand it and you will be able to select one of the other sites to log in to. And remember, JD has case sensitive usernames, some people seem to forget about that. Seuntjie, Thanks for the reply. I double checked and retried and it still gives the same error. Yes, I selected the 3rd menu option from the left "Site (JD)". The only other thing I should mention is that I'm using the 2fa Code but again, that works for PD. I just tried disabling 2fa on one of my other accounts and then tried again but it just does the same thing. It freezes for about a minute and then gives the error message window. I also tried deleting the dicebot2 folder in the users/appdata/roaming directory and it does the same thing. I've been using build12 on 2 different accounts on JD without any problems. I do not use 2FA. Since you deleted the settings directory, it should be exactly the same as logging in from a webpage. |
|
|
|
I think there are at least 3 forks. We need to figure out which one we should be on.
I just restarted my client it's showing block 226503 of 319852 blocks downloaded. Last block about 1 1/2 hours ago.
Here is the peer info.
Based on the last post I'm trying connect with a couple of the IP's that have the longer block chain. So far it looks good 4320 of 418723
Maybe MaryJ or Jahvinci can post a bootstrap file to make updating faster. Also does the client need updated checkpoint per Crestington?
Everyone should be careful not to transfer substantial amounts of coin until we're all on the same fork. Working on checkpointing and making a bootstrap file, stay tuned I'm not sure the 418723 is actually a good chain either. I got to 226503 without connecting to specific other clients. Now that I tried to force myself to use the clients at a height of 418723, I seem to get stuck on block 4320. Stopping and restarting the client a few times seems have now have things moving. up to block 10028 and climbing. Also I'm just futzing around, don't take anything I say or do as official. I'm not really sure I even know what I'm doing... I know there are some sharp cookies out there that can look at this mess and tell us exactly where we should be. You have some people connecting on version 1.1, has the protocol been changed? Maybe you have some conflicts. Good question. I've been on 1.2 since I started back on 10/09/2014. Also the wallet in the op is version 1.2 My internet went out, but after reconnecting I'm at block 78536 and climbing (18.8%). This may finish today... |
|
|
|
I think there are at least 3 forks. We need to figure out which one we should be on.
I just restarted my client it's showing block 226503 of 319852 blocks downloaded. Last block about 1 1/2 hours ago.
Here is the peer info.
Based on the last post I'm trying connect with a couple of the IP's that have the longer block chain. So far it looks good 4320 of 418723
Maybe MaryJ or Jahvinci can post a bootstrap file to make updating faster. Also does the client need updated checkpoint per Crestington?
Everyone should be careful not to transfer substantial amounts of coin until we're all on the same fork. Working on checkpointing and making a bootstrap file, stay tuned I'm not sure the 418723 is actually a good chain either. I got to 226503 without connecting to specific other clients. Now that I tried to force myself to use the clients at a height of 418723, I seem to get stuck on block 4320. Stopping and restarting the client a few times seems have now have things moving. up to block 10028 and climbing. Also I'm just futzing around, don't take anything I say or do as official. I'm not really sure I even know what I'm doing... I know there are some sharp cookies out there that can look at this mess and tell us exactly where we should be. |
|
|
|
|
I think there are at least 3 forks. We need to figure out which one we should be on.
I just restarted my client it's showing block 226503 of 319852 blocks downloaded. Last block about 1 1/2 hours ago.
Here is the peer info.

[
{
"addr" : "173.24.6.175:19559",
"services" : "00000001",
"lastsend" : 1432951421,
"lastrecv" : 1432951421,
"conntime" : 1432951294,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.2.0/",
"inbound" : false,
"startingheight" : 418723,
"banscore" : 0
},
{
"addr" : "71.196.182.98:19559",
"services" : "00000001",
"lastsend" : 1432951295,
"lastrecv" : 1432951297,
"conntime" : 1432951295,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.2.0/",
"inbound" : false,
"startingheight" : 226503,
"banscore" : 0
},
{
"addr" : "72.208.65.226:19559",
"services" : "00000001",
"lastsend" : 1432951296,
"lastrecv" : 1432951296,
"conntime" : 1432951295,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.2.0/",
"inbound" : false,
"startingheight" : 418723,
"banscore" : 0
},
{
"addr" : "194.135.90.5:19559",
"services" : "00000001",
"lastsend" : 1432951310,
"lastrecv" : 1432951393,
"conntime" : 1432951295,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.1.0/",
"inbound" : false,
"startingheight" : 418723,
"banscore" : 0
},
{
"addr" : "84.46.27.6:26339",
"services" : "00000001",
"lastsend" : 1432951310,
"lastrecv" : 1432951301,
"conntime" : 1432951301,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.2.0/",
"inbound" : true,
"startingheight" : 156805,
"banscore" : 0
},
{
"addr" : "89.8.56.13:53116",
"services" : "00000001",
"lastsend" : 1432951309,
"lastrecv" : 1432951396,
"conntime" : 1432951309,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.2.0/",
"inbound" : true,
"startingheight" : 418723,
"banscore" : 0
},
{
"addr" : "104.131.2.154:35072",
"services" : "00000001",
"lastsend" : 1432951324,
"lastrecv" : 1432951325,
"conntime" : 1432951324,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.1.0/",
"inbound" : true,
"startingheight" : 319852,
"banscore" : 0
},
{
"addr" : "178.221.235.255:19559",
"services" : "00000001",
"lastsend" : 1432951421,
"lastrecv" : 1432951421,
"conntime" : 1432951335,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.2.0/",
"inbound" : false,
"startingheight" : 273320,
"banscore" : 0
},
{
"addr" : "71.196.182.98:56565",
"services" : "00000001",
"lastsend" : 1432951392,
"lastrecv" : 1432951391,
"conntime" : 1432951359,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.2.0/",
"inbound" : true,
"startingheight" : 226503,
"banscore" : 0
},
{
"addr" : "71.196.182.98:58115",
"services" : "00000001",
"lastsend" : 1432951399,
"lastrecv" : 1432951399,
"conntime" : 1432951399,
"version" : 60013,
"subver" : "/MaryJaneCoin:1.2.0/",
"inbound" : true,
"startingheight" : 339662,
"banscore" : 0
}
]
My version is 1.2.0. There are several 1.1.0 clients out there. 418723 appears to be the longest block chain. I was going to try connecting to only those clients and re-downloading the 418723 blockchain. The one I'm on seems to be stuck at the last block I staked, about 1 1/2 hours ago.
Based on the last post I'm trying connect with a couple of the IP's that have the longer block chain. So far it looks good 4320 of 418723
Maybe MaryJ or Jahvinci can post a bootstrap file to make updating faster. Also does the client need updated checkpoint per Crestington?
|
|
|
|
|
Something weird going on. If I look at the debug panel status it shows I'm at block 226437 of 415246. But it looks like the wallet is staking things. A lot of staking, and based on # of confirmations there are others staking or moving things in between.
Now I'm at 226440.
I can't copy anything from the wallet block explore or I would supply the hash so others could check and see if were all on the same chain. I'll check for a working external block explore and see if I'm even close.
|
|
|
|
This just in:  I looked at the bet log, and it's weird: +-----------+--------------+---------+---------------------+---------------+
| betid | stake | nonce | date | profit |
+-----------+--------------+---------+---------------------+---------------+
| 289769586 | 484.17309229 | 4360076 | 2015-05-26 21:50:56 | -484.17309229 |
| 289769534 | 0.0001 | 4360075 | 2015-05-26 21:50:56 | 0.000065 |
| 289769514 | 190.73514798 | 4360074 | 2015-05-26 21:50:55 | -190.73514798 |
| 289769462 | 75.1382042 | 4360073 | 2015-05-26 21:50:55 | -75.1382042 |
| 289769449 | 0.0001 | 4360072 | 2015-05-26 21:50:54 | 0.000065 |
| 289769392 | 0.0001 | 4360071 | 2015-05-26 21:50:54 | -0.0001 |
| 289769335 | 29.59994416 | 4360070 | 2015-05-26 21:50:53 | -29.59994416 |
| 289769326 | 11.660602 | 4360069 | 2015-05-26 21:50:53 | -11.660602 |
| 289769299 | 0.0001 | 4360068 | 2015-05-26 21:50:52 | 0.000065 |
| 289769257 | 4.59357755 | 4360067 | 2015-05-26 21:50:51 | -4.59357755 |
| 289769204 | 1.80959394 | 4360066 | 2015-05-26 21:50:51 | -1.80959394 |
| 289769193 | 0.0001 | 4360065 | 2015-05-26 21:50:51 | 0.000065 |
| 289769136 | 0.71287144 | 4360064 | 2015-05-26 21:50:50 | -0.71287144 |
| 289769124 | 0.28082858 | 4360063 | 2015-05-26 21:50:50 | -0.28082858 |
| 289769110 | 0.0001 | 4360062 | 2015-05-26 21:50:49 | 0.000065 |
| 289769063 | 0.0001 | 4360061 | 2015-05-26 21:50:48 | -0.0001 |
| 289769008 | 0.11062961 | 4360060 | 2015-05-26 21:50:48 | -0.11062961 |
| 289768998 | 0.04358143 | 4360059 | 2015-05-26 21:50:47 | -0.04358143 |
| 289768956 | 0.0001 | 4360058 | 2015-05-26 21:50:47 | 0.000065 |
| 289768900 | 0.01716847 | 4360057 | 2015-05-26 21:50:46 | -0.01716847 |
| 289768893 | 0.00676335 | 4360056 | 2015-05-26 21:50:46 | -0.00676335 |
| 289768866 | 0.0001 | 4360055 | 2015-05-26 21:50:45 | 0.000065 |
| 289768825 | 0.0001 | 4360054 | 2015-05-26 21:50:45 | -0.0001 |
| 289768769 | 0.0001 | 4360053 | 2015-05-26 21:50:44 | -0.0001 |
| 289768750 | 0.00266435 | 4360052 | 2015-05-26 21:50:43 | -0.00266435 |
| 289768698 | 0.00266435 | 4360051 | 2015-05-26 21:50:42 | 0.00173182 |
| 289768646 | 0.01716839 | 4360050 | 2015-05-26 21:50:42 | 0.01115945 |
| 289768637 | 0.00676332 | 4360049 | 2015-05-26 21:50:41 | -0.00676332 |
| 289768585 | 0.0001 | 4360048 | 2015-05-26 21:50:41 | 0.000065 |
| 289768572 | 0.0001 | 4360047 | 2015-05-26 21:50:40 | -0.0001 |
| 289768513 | 0.00266434 | 4360046 | 2015-05-26 21:50:40 | -0.00266434 |
| 289768505 | 0.0067633 | 4360045 | 2015-05-26 21:50:39 | 0.00439614 |
| 289768447 | 0.00266433 | 4360044 | 2015-05-26 21:50:39 | -0.00266433 |
| 289768437 | 0.00266433 | 4360043 | 2015-05-26 21:50:38 | 0.00173181 |
| 289768383 | 0.00266432 | 4360042 | 2015-05-26 21:50:38 | 0.0017318 |
| 289768374 | 0.00266432 | 4360041 | 2015-05-26 21:50:37 | 0.0017318 |
| 289768319 | 0.00266431 | 4360040 | 2015-05-26 21:50:37 | 0.0017318 |
| 289768312 | 0.00266431 | 4360039 | 2015-05-26 21:50:36 | 0.0017318 |
+-----------+--------------+---------+---------------------+---------------+ It looks like two bots running at the same time on the same account - one running martingale, and one flat-betting? It looks like he might be pre-rolling. Or looking for a certain pattern to form. I've tried that before. Didn't work for me. |
|
|
|
then please connect to these nodes...mine still doesnt sync but i keep on trying
or can you give us some of your nodes?
Thats what I'm connected to. Ok guys, if you plan to keep this coin alive you all must turn on your wallets and let them stake. You need to have some amount of MARYJ in wallet to make it stake. In other case if you do not do that and keep your wallets offline this coin will die, as it is situation now. I made 3 nodes but there is no network to connect.
Turn on your wallets, let them stake and lets try to make the network alive!
addnode 194.135.90.5
addnode 194.135.90.81
I can not guarantee all this will work, but it is worth to try.
These... Original wallet from 10/12/2014 |
|
|
|
|
Show Posts
