Regarding exchanges after launch: are there some plans to use NXT MGW as exchange? If multisig will be ready, I think we need get rid off centralized exchanges and add NEM to MGW.
You mean NEM MGW? It could be NEM MGW, of course. But there is working NXT MGW and I think 50% of Nemsters also using NXT. I prefer to work on behalf NEM MGW rather than stuck with NXT... People who already had used NXT could have bought NEM from NX AE. This time it should be the opposite way. Absolutely agree with! We get tired of the stuck with NXT But Pat wrote, that NEM core devs will not have time for this. So what is the solution other, than use NXT MGW at the begining? Do you have one? NXT/Supernet multigateway is a working solution and I think NXT/Supernet devs will help with NEM implementation in MGW.
|
|
|
Regarding exchanges after launch: are there some plans to use NXT MGW as exchange? If multisig will be ready, I think we need get rid off centralized exchanges and add NEM to MGW.
You mean NEM MGW? It could be NEM MGW, of course. But there is working NXT MGW and I think 50% of Nemsters also using NXT.
|
|
|
Regarding exchanges after launch: are there some plans to use NXT MGW as exchange? If multisig will be ready, I think we need get rid off centralized exchanges and add NEM to MGW.
|
|
|
No transactions today from 6:00 a.m.? Which is the last block?
|
|
|
I'm not having any trouble forging. I keep my machine running and I'm seeing my account hit more and more blocks each day.
My guess is the one account that is hitting the most blocks is Bter. Keep in mind, they probably have the largest balance and I'm sure their node is always on. We see this with Qora too. The exchanges often hit all of the blocks when the other top 2, or 3 nodes happen to be offline at the same time.
Anyway, keep up the good work. Also, if you want to move this discussion off of here, I recommend Slack or even reddit. Personally I like the public, forum feel of reddit but a lot of people like Slack for community organization and project development.
Bter does not forge. They have client with forging mode off. How can we be sure of that?
|
|
|
I got some questions on my mind:
1) log/ is empty. Is there a way to have the logging output there?
2) How can I forge? I would like to support the network.
2. Just run wallet and that's it. You need at least 500 000 NODE in account to forge.
|
|
|
How to understand the amount of dividends paid for keeping NHZ in wallet? My amount increases, but everyday dividends are constant.
|
|
|
Stuck at:
Loading ... Please wait! Blockchain verified complaite, wait synced blocks.
before that it says it verified 3935 blocks.
Running Win Client 9.4.1b
Any ideas?
Just wait longer.
|
|
|
cant open new windows client ,when i try to open it flashes and disapiers .Didnt have any problems with older clients
You can tray remove(move) db files from "C:\nxtl\db" folder. i cant even open the client ,it keeps dissapiering Do you delete "C:\nxtl" folder? If Yes, please give more info.(Windows version etc...) deleted db folder,i am using windows 7,cant even open the wallet I think you are using the older version.try this one Or after starting client, wait longer, it takes a lot of time to load. man net nepasileidzia ,atrodo kad windousai ji iskart uzdaro ,nors paspauddes leisti prieiga Taip tik atrodo, kad nepasileidzia, man uztrunka apie 5-8 minutes, kol pasirodo kliento langas po startavimo. Pas mane windows 7, 8 GB RAM, 64 bit.
|
|
|
cant open new windows client ,when i try to open it flashes and disapiers .Didnt have any problems with older clients
You can tray remove(move) db files from "C:\nxtl\db" folder. i cant even open the client ,it keeps dissapiering Do you delete "C:\nxtl" folder? If Yes, please give more info.(Windows version etc...) deleted db folder,i am using windows 7,cant even open the wallet I think you are using the older version.try this one Or after starting client, wait longer, it takes a lot of time to load.
|
|
|
The explorer script is back up and we have deployed a permanent fix to what was causing it to fail. https://explorer.horizonplatform.io/We are aware of people missing some stake holder payouts, and are investigating that script now and working on a similar fix. I'll keep you updated. You can stay up to date with the latest news and discussions here: https://www.facebook.com/groups/NHZOfficial/and follow us on Twitter: @Horizon_HZ I have not got the pay about 4 days. Hey, we need information in order to do anything on our end. Create a topic here: http://nhzcrypto.org/forums/support/And please provide a list of your node IP's and the Horizon accounts they are linked to so we can check them. Otherwise, we can not do anything since we don't know what nodes or accounts you are talking about. Account NHZ-C9U3-SW9X-5WFG-DCN3T, node 217.17.88.5. Didn't receive bounty for 10, 11, 12 December.
|
|
|
Downloaded the new NXT wallet and it gets stuck at block 297,687. Is that because I'm running a 32bit system running Java 6?
Cannot say for sure, but I think at least Java 7 was required since "the beginning". So it's certainly worth updating. (32bit OS shouldn't be a problem) there is no java 7 for 32 bit windows I found it here: http://www.java.com/en/download/manual_java7.jspAlso, you can download java 8, because updates of java 7 end on 15 April, 2015
|
|
|
What happened with 1/12/2014 bounty? I didn't receive them. Others?
Got it, at the same time as every day Didn't receive on 1st of December. Account NHZ-C9U3-SW9X-5WFG-DCN3T
|
|
|
What happened with 1/12/2014 bounty? I didn't receive them. Others?
|
|
|
Still 194 stakes on Nxt AE according to coinmarketcap. Should we ask the Nxt guys to make a special announcement on their forum and maybe even send out an email?
Shortly I'm going to send a message to all nxt addresses that contain nem stake. (manually, but has to be done. unless some one wants to run a bot for me, I can't write bots) You can try to use Dividends+ module of the Supernet add-on to NRS client. New version just came out. It is possible to send 0.01 or other amount of NXT including message in transaction to all existing stakeholders automatically. New Supernet can be found at https://bitbucket.org/longzai1988/supernet/downloads/supernet-1.3.4.3.zip
|
|
|
I know, many people may have asked this question already. But here we go. On Octobre 5th, I got a token through PM - no infos about what to do with it. Now I read that I am too late to claim my stake... and I read about phase 1, 2, 3 and deadlines.
I was away for a long time and never thought it would be "too late" to get my full NEM stake.
So, please someone tell me, what I have to do to get my full stake. Thanks in advance.
You can claim after launch. Stick around and we will process you then. Just to clarify as you did not get a straight answer. Based on the rules at the time you joined the movement you would have lost your stake for not claiming it on time. Based on the new rules, agreed by the community, you will have an extra 3 months to claim but with a penalty. If you were to claim : - 1 month after launch you get 75% of the stake (that would be the best scenario for you right now) - 2 months after launch you get 50% - 3 months after 25% I'm sure you will be disappointed about this, but you still get loads of NEM and I think you should be happy some people fought to extend the deadline as otherwise you would have been even more disappointed right now. Please check the thread at least once every 2 weeks and you should be fine claiming your 75% of the stake. To sent the token without links and infos about claiming was bullshit. All I can say... and yeah, I am happy... lost 25%... Anyway, thanks for your answer... there'll be an announcement but I'll just go ahead and drop it. The penalty of 25% will be dropped. Everyone will get their full share. Why would anyone be happy to loose Oo. I hope this as always goes to show that we do listen to people. So, deadline of 22nd of November doesn't have sense? Or it is only for BTT stakes?
|
|
|
Staff, my clients syncronize again.
I did so: 1 - I just deleted the file "peers.db". 2 - I restarted my internet connection (which must have taken a new IP). 3 - I open client.
Who wants to test it?
Why? Maybe then it connects only with the first of two "dev" servers, and 5.xxx.xx4.65 5.xxx.xx4.108 and no have other clients trying to sync (because of the new IP).
So it would be nice in future versions or change port with each update, or do operation of change after "block nš XXX" is reached.
Tried this, everything what I see is login screen with: "Loading ... Please wait! Download blocks start. Download block at height: 3941 And goes nowhere.
|
|
|
Block synchronization not working?
Here also stopped. The network of the previous version was better. Yes, my client also stopped. Need to restart it, now I see last block is 3936 with my restarted client.
|
|
|
Older version of NODE is also not working?
Seems not working for me too
|
|
|
|