Lol I thought I was the only one getting pissed at these stupid gridseeds.... Right now only 11 of 14 are working after the mod they were all working then a couple stopped submitting shares resoldered the resistor those started working again then a few more stopped resoldered those now 3 more aren't submitting shares. Smdh ..... Guess that's what happens when I mess with shit.
Yeah. These have been nothing but trouble so far. If my blood pressure goes up any more, I'm gonna have a heart attack, and finally be at peace...lol So far I have modded 2. 1 of them has quit working all together, at any freq. The other seems to be working at a higher freq, if I put it on it's own PC, because I can't figure out how to adjust it as part of a group. Another one has stopped working as well. I didn't mod that one. No single software seems to be able to handle these properly. Nothing works. Before I bought them, All the posts made them sound so great. I guess I am doing things all wrong, because they are NOT. It sounds like you may have moved on from the Pi, but I had the same problems with it while running scripta. I followed the directions in this thread - http://www.raspberrypi.org/forums/viewtopic.php?f=28&t=70437 and have been running since the 8th without any problems. Let me know if you decide to give it another go and I might be able to help if you run into any other problems. I have tried this, but when i add "dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3" to cmdline.txt my pi no longer responds. Any suggestions? |
|
|
|
Well, I am used to cgminer, and I see that you can adjust each one individually with that. But I can't seem to get it to see my miners.
It seems pretty buggy.
Is there some trick or step I am missing to get CGminer to work with windows?
I use it for my GPUs and it has always been rock solid. Just no luck with these gridseeds.
I am using Cgminer on W7/64 since day 1...Rock solid with me...I CAN set not only individual miners, but even individual chips speed within the particular Gridseed... Zadig driver is absolute MUST...have to change STMicroelecrtonics driver to => Win USB driver v.xx.xx.xx... I am un-plugging the USB cable first...power Off-On on the miners...wait like 30-60sec...plug the usb cable back to the computers USB...start Cgminer...bat file works for me...immediately recognizes them... and is hashing right away...no problems for days... Hope will help... ZiG Edit : Make sure that you are using USB 2.0 port...NOT USB 3.0...on the back of your PC...  I have noticed a few people use girnyau's cgminer which I'm using on a pi and so far no problems. Its easy enough to find with google. use --gridseed-freq *GRIDSEEDSERIAL*=*freqvalue* |
|
|
|
It should be a coffin on the logo as this coin is dead.  Maybe you should visit the irc channel. you will soon discover this coin is far from dead. second logo looks sweet. |
|
|
|
I have now done 4 units, here is some of my handy work  two units have thermal compound on the chips while the other two i have reused the existing thermal pads. I will post a comparison in 24hrs. |
|
|
|
is there a per-compiled windows version of cpuminer for the noobs  |
|
|
|
|
Standard of service is relative to your expectation, and your expectation should be based on the market which you are dealing with.
The procurement, sale, and distribution of OEM products is very price driven and competitive. Margins are minimal, hence overheads kept as low as possible. low overheads results in lower manpower, lower manpower results in overburden.
We should all allow Atari02, and all other distributors of ASIC's a bit of leniency. They are providing a service to this community. A service which we as individuals are unable to do. And all the while remain competitive and get us as consumers the best price possible.
|
|
|
|
Hi Guys, Modded my first unit using 47K axial resistor. Running for 24hrs now @1150 with solid 500KH and no HW errors A quick question - I have a heap of 47K resistors with the a sixth band, which is red. are these ok to use for the mod? |
|
|
|
Atari02 has made promises to me via PM
I held up my end of the deal.
Atari seems to have gave up on his end.
Not impressive. Add that to so many complaints from customer I've referred. I rate you 2nd last just before the dead last FuckZoomHash.
I believe patients is the key. If there is one thing I have found with dealing with Atari02 is he will come through for you in the end. My advice to you just keep reminding him. The poor guy is constantly hammered by new orders, changes to orders, and co-coordinating stock, packaging, and shipping. He has to do all this while remaining competitive, which he has done an amazing job of doing. I have been in 2 of his group buys, and plan to do another with him when funds become available (which will be soon thanks to BC). Yes communication can be little slow, but I have always got my product, and in reasonable time. |
|
|
|
|
I have just downloaded wallet but cannot find block source.
can someone please provide the latest nodes.
|
|
|
|
|
Walking into NAB branch tomorrow and closing all my accounts. Goodbuy NAB!
So who will coinjar use now? CBA had kicked them to the curb prior to NAB.
|
|
|
|
My wallet can't sync now, before 9 hours, I upgrade new version wallet by flow the READ-ME-FIRST.txt, it worked.
But when I reopen my wallet it can't sync again, the icon in lower right corner flashing between "0 connection" and a signal bar. I delete everything except wallet.dat and shacoin.conf and restart wallet, it still not sync, so I delete all file include shacoin.conf(only keeped wallet.dat) and restart wallet again, it still not worked.
and now my balance became 0, only few thousand coin unconfirmed ( I have about 64k coin in my wallet). What do I do?
I had the same problem, change your shacoin.conf to the following: listen=1
daemon=1
maxconnections=100
rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=password
addnode=74.255.67.182:25656
addnode=74.255.67.182:25658
addnode=5.39.68.168
addnode=178.33.226.17 I dont know why, but changing "connect" to "addnode" worked for me |
|
|
|
Dev, what is the next thing that is gonna be done with coin... Have u taken multipool into consideration or anything else that will make us visit the stars?  mined blocks are only 1SHA/block, no point mining it or adding it to a multipool. I'll forward my previous minting society proposal to (dev)cryptogir now. so it went from 1OOOO to ONE? =) waaaat? Because it's POS now, what neverminds17 means the multipool for POS coin is mining other altcoins and buy SHAcoin, this will help to pump the price. This is a great idea. Furthermore if this was to happen prehaps it would be better to do hedge-mining instead of traditional multipool mining. something like this https://bitcointalk.org/index.php?topic=428955.0This is a much more coin friendly way to do multipool. |
|
|
|
Are there any giveaways or faucets, i like to try this coin, thank you.
Post your wallet address and I will send some your way. SY6ihCzqS3WQDh6t1v7agkE3uFkM36XF2E Thank You Done! All has been working fine at CryptoALTeX guys and I here cryptogir is still hard at work adding more features, etc. Join us on irc.freenode.net
#theshacoin
#cryptoaltex
Great to hear, also love the layout of your exchange! It looks like CryptoGir has isolated the main issue of wallet sync and has implemented a temporary solution. I can confirm the network is running much more stable now. Stay tuned everyone, SHAcoin is back on track! |
|
|
|
Are there any giveaways or faucets, i like to try this coin, thank you.
Post your wallet address and I will send some your way. |
|
|
|
I upgraded my wallet today, but now my balance is 0, but all the transactions are still listed.
Anyone can tell me why? How to solve it?
Hi, what is your wallet address please and can you post a screen grab? I have the same problem with wallet. This is one of my addresses Sd6cwpVAgfBhKPi1LjiHHDKJJqJjh39sP3 and here is ss https://www.dropbox.com/s/9bsigtn3aq42dfq/shawallet.jpgDid you follow the readme incuded with the update. You must remove all existing files from the appdata folder except for wallet.dat Also make sure you add the shacoin.conf file included with the beta to you appdata folder. |
|
|
|
July 15, 2013 Sounds like 100 years ago in coins' world. Many alts from that period thrive today. I'm interested in this coin, I just want to understand why the dev abandoned his previous project. I had left Timecoin because I knew it wasen't what I wanted to create. It was more a test of my skills and launching and just to experience coin building in a whole and to learn I dont believe TMC ever really went in the gutter, Source code is still available and I think the blockchain is still intact if someone put up a seednode, it just doesn't have nodes I believe and its built off an older version of Litecoin... ..Now I have made two badass coins both working great Matrixcoin and Hashcoin! Your honesty is refreshing, I like what you have done with the block reward as well so I will point some HASH your way. |
|
|
|
July 15, 2013 Sounds like 100 years ago in coins' world. Many alts from that period thrive today. I'm interested in this coin, I just want to understand why the dev abandoned his previous project. |
|
|
|
|
Show Posts
