Thanks the question! Hub is here. Yesterday I've restarted it and working since then. Now i won't touch until it stops, so I can post what dmesg shows, and I'll make the hub then. You had a good carma, the miner is afraid..  It will not stop  Ops i have not said it  That is how tplink works when done things are done right Non stop since last cgminer upgrade cgminer version 4.2.3 - Started: [2014-04-07 14:06:04] -------------------------------------------------------------------------------- (5s):1.986T (1m):2.124T (5m):2.259T (15m):2.160T (avg):2.100Th/s A:331377180 R:1003322 HW:3103982 WU:29338.8/m Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as Block: 5ea1ca8a... Diff:6.12G Started: [10:52:17] Best share: 239M -------------------------------------------------------------------------------- SB management [P]ool management ettings [D]isplay options [Q]uit
0: HEX8 0 : 230 860/ 862mV | 75.55G / 234.5Gh/s WU:3276.1/m
1: HEX8 1 : 230 860/ 859mV | 1.868T / 231.2Gh/s WU:3230.0/m
2: HEX8 2 : 230 860/ 870mV | 98.01G / 233.5Gh/s WU:3262.3/m
3: HEX8 3 : 230 860/ 859mV | 319.8G / 233.6Gh/s WU:3262.8/m
4: HEX8 4 : 230 860/ 869mV | 8.597G / 228.7Gh/s WU:3195.6/m
5: HEX8 5 : 230 860/ 863mV | 934.5G / 236.0Gh/s WU:3296.9/m
6: HEX8 6 : 230 860/ 858mV | 77.34G / 234.1Gh/s WU:3270.8/m
7: HEX8 7 : 230 860/ 858mV | 29.11G / 235.2Gh/s WU:3286.0/m
8: HEX8 8 : 230 860/ 862mV | 14.12G / 233.2Gh/s WU:3258.3/m
-------------------------------------------------------------------------------- |
|
|
|
alright thanks for the info, was just looking at other options i might need.
I am trying to run my hex16a2 on my windows 8 Desktop PC with the newest hexminer software and miner_proxy with usb drivers. Every time i press start on the mining the console will show it is connection then it fails and says the driver need to be up dated even though i have the most recent updates.
Is there a cgminer compiled to run on windows and support the hex boards? this would be very handy
Buy a tplink dude and forget I can not give much help with windows but there is one look at 2good topic. It is a mess with cgminer and windows zdiag drivers and so on... tplink will pay the electricity for a month and it is plug and play  |
|
|
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X Don't laugh on me but what is dmesg? I would't. There is nothing to be ashamed of..dude. dmesg shows some kernel messages related to all of the above You know how to ssh to tplink right? when you ssh to the the tplink just type dmesg and post that here Ok I'll do it when it stops. But I'll go and get a usb hub. Thanks! Is all good dude? Have you plugged the hub in between? |
|
|
|
You know how to kick his ass right? He just asks for it  |
|
|
|
That seems so helpful, thank you I'll take a look. Dude, invest your time and efforts in tplink it will pay of for a month just from electricity costs and it works beter and so on... |
|
|
|
how many of the hex16a devices can be hooked up to just one TL-MR3020 router with preloaded CGminer /dd-wrt for HEX16 board ?
I have reached 7 10 should be ok also but make sure you are using common PSU ground otherwise shit will happen |
|
|
|
opieum2, Stan-O Congrats guy's Welcome to the light sight. No seriously guy's My irony probably and phinn also is just here to show you what is going on with zipkin. I am not happy and phin also when you are fucked. I am serious here So if chose to wait for your products as I call them crap there is a light in the tunnel - seems mellbro made it work. So there is some chance that you will get something which is ok and working. But it will be a lot less in performance because it is undervolted and there are about 3-5% dead cores - not amt fault chips are as they are. I am not commenting power this chip needs power and coolong. But i just can not understand why AMT keep silent about the facts which no matter how bright engineers they have they will not be able to change anything. In short to you and to the rest of amt customers Ask for refund if you can - best option |
|
|
|
Oh good, lets push AMT to a self moderated thread so they can lie to customers at will now, without being called out on it.
I was in a hurry to open this one because they moderate both official an unofficial one. I thought they gona moderate this one also |
|
|
|
hey guys just done a little video of my 520gh miner, the video is not full screen like normal for some reason as i took it on my phone. im posting this as nobody else has posted a video of a working miner as of yet that im aware. full 24hr graph will be posted once ready for your scrutiny. https://www.youtube.com/watch?v=w7rUW2H-wqk Congrats mell It seems ok for me Thank you very much for the vide and the efforts to Amt Congrats you made it first thing that works 1. 3 blades are doing 520 GH so 5 blades what your 1.2t miner wii be equals to 866 my That is what I call complete scam. folks payed for 1.2 t but they will get eventually 866 in return? 2. Even six blades could not reach 1.2 t Why, Because it is under clocked / bolted a loot. why because your cooling boys just sucks.that is why. And probably because you are still fighting for my 10 btc So take my sincere apologies there is one AMT miner which works Yes it is Send melbro another one for thanking him that he saved your ass for the moment. But it is a temporary solution only Will yo be so kind to measure the themp from the other side big heatsink . That is where 70% of the heat should be disposed. 10x if i run cgminer from the pi itself and not via amt gui i was running 205gh on 2 cards with 179 on the third card so i think after this 24hr graph is up im gonna see if there is a way to tweak and get it better (i am running nominal mode tho tbh will try turbo at later date) i will keep you posted on whats going on as much as i can like i said the temps from the big heatsink side are from right to left : 37*c - 45*c - 46*c while the small heatsinks sit at approx 65-70*c at avg 0.84v per chip Probably there are dead chips or cores on third one. Any way I will watch your results closely About oc it is your depiction only..I would not do it but let us hope it is cold in canada |
|
|
|
Hi,
PLEASE I NEED HELP. I can't set up my new bitfury v2 on windows 7, HEXMINER says new proxy available please update. What am I supposed to do ?
As I said many times you need a tplink. No seriously I can not help you I have never seen hexminer but probably other folks will give you a hand Guy's?  |
|
|
|
Your psu can provide 104 Amps on 12V only. Not good....for 5 modules
about conector, other folks know maybe?
Guy's?
Not plugging in all 5 yet. I'm only will go one by one until the other power supply shows up. Pm mell he made it I am sure he can give you a hand.there is a video of his miner also I can't unfortunately... |
|
|
|
hey guys just done a little video of my 520gh miner, the video is not full screen like normal for some reason as i took it on my phone. im posting this as nobody else has posted a video of a working miner as of yet that im aware. full 24hr graph will be posted once ready for your scrutiny. https://www.youtube.com/watch?v=w7rUW2H-wqk Congrats mell It seems ok for me Thank you very much for the vide and the efforts to Amt Congrats you made it first thing that works 1. 3 blades are doing 520 GH so 5 blades what your 1.2t miner wii be equals to 866 my That is what I call complete scam. folks payed for 1.2 t but they will get eventually 866 in return? 2. Even six blades could not reach 1.2 t Why, Because it is under clocked / bolted a loot. why because your cooling boys just sucks.that is why. And probably because you are still fighting for my 10 btc So take my sincere apologies there is one AMT miner which works Yes it is Send melbro another one for thanking him that he saved your ass for the moment. But it is a temporary solution only MELL , Will yo be so kind to measure the themp from the other side big heatsink . That is where 70% of the heat should be disposed. 10x |
|
|
|
Nice I realy do hope that they will get what they have asked for.... |
|
|
|
|
Your psu can provide 104 Amps on 12V only. Not good....for 5 modules
about conector, other folks know maybe?
Guy's?
|
|
|
|
I really wish this was less fighting between each other and more post about making new improved awesome miners.  Can't we all get along! miners will be available in no time dude The only two conditions are to be met 1. Marto to receive chips ASAP depends from black arrow only 2. Black arrow to keep his word and give good price for the chips to all folks who produce boards Then we miners would be able to get minions in our hands and enjoy roi Eventually.... All depends on black arrow only Ps: there is no ASIC chip available at the moment which will ever roi it's price alone I do sincerely hope that black arrow will change it |
|
|
|
ok, clear answer. But i see now i was not very clear with my question. The dump of log came from router not being connected with a miner, so my question was about the cgminer version only Sorry about me being not very clear. Do not worry it is just a stupid txt file located in file system /etc/hexminer_version or something techno bit guy's probably forgot to update it also during build just look what screen tells you dude. That is always correct if there were HEX3 options inside the web you are golden... |
|
|
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X Don't laugh on me but what is dmesg? I would't. There is nothing to be ashamed of..dude. dmesg shows some kernel messages related to all of the above You know how to ssh to tplink right? when you ssh to the the tplink just type dmesg and post that here |
|
|
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X |
|
|
|
Any ideas why keeps shut down every 5 hours?
What shuts down Some more info dude os product software which you are using? Yeah sure! Sorry I was in hurry just dropped in the question. So it's a Hex8A1 running directly from a TP-Link. In the first few days it was runing fine, but the last 3 deays it keeps shuting down about every 5 hours and I have to switch it down and up to get it runing. The boards stops working and I got this message from api log: [Firmware Version] => 20140329 cgminer: 4_1_0_5ed45a0 Socket connect failed: Connection refused Edit: Just ssh-d in. Cgminer starts but don't recognize the board. Lsusb? Try setting default to 8 Directly into tplink? Use hub in between for sure dmesg will show you a lot of usb errors. Tplink does not like slow usb devices Just put a usb hub in between that is all You can do folowing 1. Throw away tplink power adaprter 2. Buy usb 2.0 powered hub 3. Throw away usb hub power adapter 4. Rib of the power jack of hub and connect it to your psu 5V - take power for the hub from PSU which you are using to power the miner 5. Connect both usb cables of tplink into that hub power and data 6. Plug in there your hex board 7. Forget about issues;) Strange but I'll give it a try! Thanks Loshia! It is well known atheros chipset USB bug dude When it happens you are lost. Only reboot can solve the situation, because usb is fucked up completely Trust me... And make sure you are using single ground from your PSU only. That is the key There is a slight chance your usb cable to be faulty also.... PS: as temporary solution you can vi /usr/bin/cgminer-monitor.sh find at the bottom something like: echo "`date`: cgminer hang starting" >> /tmp/monitor.log mv /tmp/cm_old.log /tmp/cm.log exit 0; change it to echo "`date`: cgminer hang starting" >> /tmp/monitor.log mv /tmp/cm_old.log /tmp/cm.log reboot exit 0; And make sure cron is running But this is temp solution only |
|
|
|
just upgraded the router to 0.3.2 as you showed it is newest version. But after upgrade i see this [Firmware Version] => 20140329 cgminer: 4_1_0_5ed45a0 Socket connect failed: Connection refused What happend? Should i upgrade again? not with upgrade file but with factory file? mm, they are not absolete for me, managing to buy used ones for 30 euros or less, so i am starting to stack them now You need to fill in Hex3A3 Chip Count (Default: 16), Hex3A3 Chip Frequency (Default: 7000), Hex3A3 Chip Core Voltage mV (Default: 750), Hex3A3 Enable or Disable Chips (Default: 255) with their default value which is blank right now Or upgrade without keeping settings defaults are inside image. However if you do upgrade wile keeping settings do as zich suggested. In general after each upgrade while keeping stings check the cgminer web and make sure there are no blanks there for all HEX* stuff |
|
|
|
|
Show Posts
