loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 14, 2014, 10:31:53 AM |
|
Any ideas why keeps shut down every 5 hours?
What shuts down Some more info dude os product software which you are using? Yeah sure! Sorry I was in hurry just dropped in the question. So it's a Hex8A1 running directly from a TP-Link. In the first few days it was runing fine, but the last 3 deays it keeps shuting down about every 5 hours and I have to switch it down and up to get it runing. The boards stops working and I got this message from api log: [Firmware Version] => 20140329 cgminer: 4_1_0_5ed45a0 Socket connect failed: Connection refused Edit: Just ssh-d in. Cgminer starts but don't recognize the board. Lsusb? Try setting default to 8 Directly into tplink? Use hub in between for sure dmesg will show you a lot of usb errors. Tplink does not like slow usb devices Just put a usb hub in between that is all You can do folowing 1. Throw away tplink power adaprter 2. Buy usb 2.0 powered hub 3. Throw away usb hub power adapter 4. Rib of the power jack of hub and connect it to your psu 5V - take power for the hub from PSU which you are using to power the miner 5. Connect both usb cables of tplink into that hub power and data 6. Plug in there your hex board 7. Forget about issues;) Strange but I'll give it a try! Thanks Loshia! It is well known atheros chipset USB bug dude When it happens you are lost. Only reboot can solve the situation, because usb is fucked up completely Trust me... And make sure you are using single ground from your PSU only. That is the key There is a slight chance your usb cable to be faulty also.... PS: as temporary solution you can vi /usr/bin/cgminer-monitor.sh find at the bottom something like: echo "`date`: cgminer hang starting" >> /tmp/monitor.log mv /tmp/cm_old.log /tmp/cm.log exit 0; change it to echo "`date`: cgminer hang starting" >> /tmp/monitor.log mv /tmp/cm_old.log /tmp/cm.log reboot exit 0; And make sure cron is running But this is temp solution only
|
|
|
|
ElGabo
|
|
April 14, 2014, 10:50:09 AM |
|
Any ideas why keeps shut down every 5 hours?
What shuts down Some more info dude os product software which you are using? Yeah sure! Sorry I was in hurry just dropped in the question. So it's a Hex8A1 running directly from a TP-Link. In the first few days it was runing fine, but the last 3 deays it keeps shuting down about every 5 hours and I have to switch it down and up to get it runing. The boards stops working and I got this message from api log: [Firmware Version] => 20140329 cgminer: 4_1_0_5ed45a0 Socket connect failed: Connection refused Edit: Just ssh-d in. Cgminer starts but don't recognize the board. Lsusb? Try setting default to 8 Directly into tplink? Use hub in between for sure dmesg will show you a lot of usb errors. Tplink does not like slow usb devices Just put a usb hub in between that is all You can do folowing 1. Throw away tplink power adaprter 2. Buy usb 2.0 powered hub 3. Throw away usb hub power adapter 4. Rib of the power jack of hub and connect it to your psu 5V - take power for the hub from PSU which you are using to power the miner 5. Connect both usb cables of tplink into that hub power and data 6. Plug in there your hex board 7. Forget about issues;) Strange but I'll give it a try! Thanks Loshia! It is well known atheros chipset USB bug dude When it happens you are lost. Only reboot can solve the situation, because usb is fucked up completely Trust me... And make sure you are using single ground from your PSU only. That is the key There is a slight chance your usb cable to be faulty also.... PS: as temporary solution you can vi /usr/bin/cgminer-monitor.sh find at the bottom something like: echo "`date`: cgminer hang starting" >> /tmp/monitor.log mv /tmp/cm_old.log /tmp/cm.log exit 0; change it to echo "`date`: cgminer hang starting" >> /tmp/monitor.log mv /tmp/cm_old.log /tmp/cm.log reboot exit 0; And make sure cron is running But this is temp solution only I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody.....
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 14, 2014, 10:52:02 AM |
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X
|
|
|
|
ElGabo
|
|
April 14, 2014, 10:54:16 AM |
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X Don't laugh on me but what is dmesg?
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 14, 2014, 11:01:43 AM |
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X Don't laugh on me but what is dmesg? I would't. There is nothing to be ashamed of..dude. dmesg shows some kernel messages related to all of the above You know how to ssh to tplink right? when you ssh to the the tplink just type dmesg and post that here
|
|
|
|
ElGabo
|
|
April 14, 2014, 11:14:08 AM |
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X Don't laugh on me but what is dmesg? I would't. There is nothing to be ashamed of..dude. dmesg shows some kernel messages related to all of the above You know how to ssh to tplink right? when you ssh to the the tplink just type dmesg and post that here Ok I'll do it when it stops. But I'll go and get a usb hub. Thanks!
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 15, 2014, 08:18:46 AM |
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X Don't laugh on me but what is dmesg? I would't. There is nothing to be ashamed of..dude. dmesg shows some kernel messages related to all of the above You know how to ssh to tplink right? when you ssh to the the tplink just type dmesg and post that here Ok I'll do it when it stops. But I'll go and get a usb hub. Thanks! Is all good dude? Have you plugged the hub in between?
|
|
|
|
ElGabo
|
|
April 15, 2014, 08:25:12 AM |
|
I don't like temp solutions. I'll just go, get a hub and do what you said. I don't want to more clever than everbody..... Super, but meanwhile if same happens again just ssh to router and post here the output of dmesg. Will you? 10X Don't laugh on me but what is dmesg? I would't. There is nothing to be ashamed of..dude. dmesg shows some kernel messages related to all of the above You know how to ssh to tplink right? when you ssh to the the tplink just type dmesg and post that here Ok I'll do it when it stops. But I'll go and get a usb hub. Thanks! Is all good dude? Have you plugged the hub in between? Thanks the question! Hub is here. Yesterday I've restarted it and working since then. Now i won't touch until it stops, so I can post what dmesg shows, and I'll make the hub then. You had a good carma, the miner is afraid..
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 15, 2014, 08:27:03 AM |
|
Thanks the question! Hub is here. Yesterday I've restarted it and working since then. Now i won't touch until it stops, so I can post what dmesg shows, and I'll make the hub then. You had a good carma, the miner is afraid.. It will not stop Ops i have not said it That is how tplink works when done things are done right Non stop since last cgminer upgrade cgminer version 4.2.3 - Started: [2014-04-07 14:06:04] -------------------------------------------------------------------------------- (5s):1.986T (1m):2.124T (5m):2.259T (15m):2.160T (avg):2.100Th/s A:331377180 R:1003322 HW:3103982 WU:29338.8/m Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as Block: 5ea1ca8a... Diff:6.12G Started: [10:52:17] Best share: 239M -------------------------------------------------------------------------------- SB management [P]ool management ettings [D]isplay options [Q]uit 0: HEX8 0 : 230 860/ 862mV | 75.55G / 234.5Gh/s WU:3276.1/m 1: HEX8 1 : 230 860/ 859mV | 1.868T / 231.2Gh/s WU:3230.0/m 2: HEX8 2 : 230 860/ 870mV | 98.01G / 233.5Gh/s WU:3262.3/m 3: HEX8 3 : 230 860/ 859mV | 319.8G / 233.6Gh/s WU:3262.8/m 4: HEX8 4 : 230 860/ 869mV | 8.597G / 228.7Gh/s WU:3195.6/m 5: HEX8 5 : 230 860/ 863mV | 934.5G / 236.0Gh/s WU:3296.9/m 6: HEX8 6 : 230 860/ 858mV | 77.34G / 234.1Gh/s WU:3270.8/m 7: HEX8 7 : 230 860/ 858mV | 29.11G / 235.2Gh/s WU:3286.0/m 8: HEX8 8 : 230 860/ 862mV | 14.12G / 233.2Gh/s WU:3258.3/m --------------------------------------------------------------------------------
|
|
|
|
ElGabo
|
|
April 15, 2014, 08:49:55 AM |
|
Thanks the question! Hub is here. Yesterday I've restarted it and working since then. Now i won't touch until it stops, so I can post what dmesg shows, and I'll make the hub then. You had a good carma, the miner is afraid.. It will not stop Ops i have not said it That is how tplink works when done things are done right Non stop since last cgminer upgrade cgminer version 4.2.3 - Started: [2014-04-07 14:06:04] -------------------------------------------------------------------------------- (5s):1.986T (1m):2.124T (5m):2.259T (15m):2.160T (avg):2.100Th/s A:331377180 R:1003322 HW:3103982 WU:29338.8/m Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as Block: 5ea1ca8a... Diff:6.12G Started: [10:52:17] Best share: 239M -------------------------------------------------------------------------------- SB management [P]ool management ettings [D]isplay options [Q]uit 0: HEX8 0 : 230 860/ 862mV | 75.55G / 234.5Gh/s WU:3276.1/m 1: HEX8 1 : 230 860/ 859mV | 1.868T / 231.2Gh/s WU:3230.0/m 2: HEX8 2 : 230 860/ 870mV | 98.01G / 233.5Gh/s WU:3262.3/m 3: HEX8 3 : 230 860/ 859mV | 319.8G / 233.6Gh/s WU:3262.8/m 4: HEX8 4 : 230 860/ 869mV | 8.597G / 228.7Gh/s WU:3195.6/m 5: HEX8 5 : 230 860/ 863mV | 934.5G / 236.0Gh/s WU:3296.9/m 6: HEX8 6 : 230 860/ 858mV | 77.34G / 234.1Gh/s WU:3270.8/m 7: HEX8 7 : 230 860/ 858mV | 29.11G / 235.2Gh/s WU:3286.0/m 8: HEX8 8 : 230 860/ 862mV | 14.12G / 233.2Gh/s WU:3258.3/m --------------------------------------------------------------------------------
I'll post when something happens. (Hope nothing...)
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 15, 2014, 09:13:05 AM |
|
Thanks the question! Hub is here. Yesterday I've restarted it and working since then. Now i won't touch until it stops, so I can post what dmesg shows, and I'll make the hub then. You had a good carma, the miner is afraid.. It will not stop Ops i have not said it That is how tplink works when done things are done right Non stop since last cgminer upgrade cgminer version 4.2.3 - Started: [2014-04-07 14:06:04] -------------------------------------------------------------------------------- (5s):1.986T (1m):2.124T (5m):2.259T (15m):2.160T (avg):2.100Th/s A:331377180 R:1003322 HW:3103982 WU:29338.8/m Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as Block: 5ea1ca8a... Diff:6.12G Started: [10:52:17] Best share: 239M -------------------------------------------------------------------------------- SB management [P]ool management ettings [D]isplay options [Q]uit 0: HEX8 0 : 230 860/ 862mV | 75.55G / 234.5Gh/s WU:3276.1/m 1: HEX8 1 : 230 860/ 859mV | 1.868T / 231.2Gh/s WU:3230.0/m 2: HEX8 2 : 230 860/ 870mV | 98.01G / 233.5Gh/s WU:3262.3/m 3: HEX8 3 : 230 860/ 859mV | 319.8G / 233.6Gh/s WU:3262.8/m 4: HEX8 4 : 230 860/ 869mV | 8.597G / 228.7Gh/s WU:3195.6/m 5: HEX8 5 : 230 860/ 863mV | 934.5G / 236.0Gh/s WU:3296.9/m 6: HEX8 6 : 230 860/ 858mV | 77.34G / 234.1Gh/s WU:3270.8/m 7: HEX8 7 : 230 860/ 858mV | 29.11G / 235.2Gh/s WU:3286.0/m 8: HEX8 8 : 230 860/ 862mV | 14.12G / 233.2Gh/s WU:3258.3/m --------------------------------------------------------------------------------
I'll post when something happens. (Hope nothing...) Only in btc world no news are good news
|
|
|
|
ElGabo
|
|
April 15, 2014, 10:14:55 AM |
|
Thanks the question! Hub is here. Yesterday I've restarted it and working since then. Now i won't touch until it stops, so I can post what dmesg shows, and I'll make the hub then. You had a good carma, the miner is afraid.. It will not stop Ops i have not said it That is how tplink works when done things are done right Non stop since last cgminer upgrade cgminer version 4.2.3 - Started: [2014-04-07 14:06:04] -------------------------------------------------------------------------------- (5s):1.986T (1m):2.124T (5m):2.259T (15m):2.160T (avg):2.100Th/s A:331377180 R:1003322 HW:3103982 WU:29338.8/m Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as Block: 5ea1ca8a... Diff:6.12G Started: [10:52:17] Best share: 239M -------------------------------------------------------------------------------- SB management [P]ool management ettings [D]isplay options [Q]uit 0: HEX8 0 : 230 860/ 862mV | 75.55G / 234.5Gh/s WU:3276.1/m 1: HEX8 1 : 230 860/ 859mV | 1.868T / 231.2Gh/s WU:3230.0/m 2: HEX8 2 : 230 860/ 870mV | 98.01G / 233.5Gh/s WU:3262.3/m 3: HEX8 3 : 230 860/ 859mV | 319.8G / 233.6Gh/s WU:3262.8/m 4: HEX8 4 : 230 860/ 869mV | 8.597G / 228.7Gh/s WU:3195.6/m 5: HEX8 5 : 230 860/ 863mV | 934.5G / 236.0Gh/s WU:3296.9/m 6: HEX8 6 : 230 860/ 858mV | 77.34G / 234.1Gh/s WU:3270.8/m 7: HEX8 7 : 230 860/ 858mV | 29.11G / 235.2Gh/s WU:3286.0/m 8: HEX8 8 : 230 860/ 862mV | 14.12G / 233.2Gh/s WU:3258.3/m --------------------------------------------------------------------------------
I'll post when something happens. (Hope nothing...) Only in btc world no news are good news For sure!
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
Gator-hex
|
|
April 15, 2014, 12:39:06 PM |
|
cgminer version 4.2.3 - Started: [2014-04-07 14:06:04] -------------------------------------------------------------------------------- (5s):1.986T (1m):2.124T (5m):2.259T (15m):2.160T (avg):2.100Th/s A:331377180 R:1003322 HW:3103982 WU:29338.8/m Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as Block: 5ea1ca8a... Diff:6.12G Started: [10:52:17] Best share: 239M -------------------------------------------------------------------------------- [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit 0: HEX8 0 : 230 860/ 862mV | 75.55G / 234.5Gh/s WU:3276.1/m 1: HEX8 1 : 230 860/ 859mV | 1.868T / 231.2Gh/s WU:3230.0/m 2: HEX8 2 : 230 860/ 870mV | 98.01G / 233.5Gh/s WU:3262.3/m 3: HEX8 3 : 230 860/ 859mV | 319.8G / 233.6Gh/s WU:3262.8/m 4: HEX8 4 : 230 860/ 869mV | 8.597G / 228.7Gh/s WU:3195.6/m 5: HEX8 5 : 230 860/ 863mV | 934.5G / 236.0Gh/s WU:3296.9/m 6: HEX8 6 : 230 860/ 858mV | 77.34G / 234.1Gh/s WU:3270.8/m 7: HEX8 7 : 230 860/ 858mV | 29.11G / 235.2Gh/s WU:3286.0/m 8: HEX8 8 : 230 860/ 862mV | 14.12G / 233.2Gh/s WU:3258.3/m -------------------------------------------------------------------------------- I see Ioshia gets the "good" chips
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 15, 2014, 01:04:44 PM |
|
cgminer version 4.2.3 - Started: [2014-04-07 14:06:04] -------------------------------------------------------------------------------- (5s):1.986T (1m):2.124T (5m):2.259T (15m):2.160T (avg):2.100Th/s A:331377180 R:1003322 HW:3103982 WU:29338.8/m Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as Block: 5ea1ca8a... Diff:6.12G Started: [10:52:17] Best share: 239M -------------------------------------------------------------------------------- [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit 0: HEX8 0 : 230 860/ 862mV | 75.55G / 234.5Gh/s WU:3276.1/m 1: HEX8 1 : 230 860/ 859mV | 1.868T / 231.2Gh/s WU:3230.0/m 2: HEX8 2 : 230 860/ 870mV | 98.01G / 233.5Gh/s WU:3262.3/m 3: HEX8 3 : 230 860/ 859mV | 319.8G / 233.6Gh/s WU:3262.8/m 4: HEX8 4 : 230 860/ 869mV | 8.597G / 228.7Gh/s WU:3195.6/m 5: HEX8 5 : 230 860/ 863mV | 934.5G / 236.0Gh/s WU:3296.9/m 6: HEX8 6 : 230 860/ 858mV | 77.34G / 234.1Gh/s WU:3270.8/m 7: HEX8 7 : 230 860/ 858mV | 29.11G / 235.2Gh/s WU:3286.0/m 8: HEX8 8 : 230 860/ 862mV | 14.12G / 233.2Gh/s WU:3258.3/m -------------------------------------------------------------------------------- I see Ioshia gets the "good" chips Not he chips dude the setup and the software Any way cgminer-api stats | grep En Would give you how many engines are working it is normal to have some dead ones. That is the chip quality so check this and then we will talk again ok And besides i am not undervolting as you can see Post your cores count voltage and clock and we will do the math it is easy
|
|
|
|
tagore
Newbie
Offline
Activity: 44
Merit: 0
|
|
April 17, 2014, 10:24:30 AM |
|
I have some HEX8A1 130 and I was planing to buy more mining power, and now I see one technobit web page the Avalon Gen 3 based miners, and I dont know which one is better, if this one or the hex8a1. The price is lower but the hash power is lower too, maybe the difference is the power needed. I dont know which one to buy.
|
|
|
|
lucazane
Legendary
Offline
Activity: 1198
Merit: 1000
|
|
April 17, 2014, 10:31:46 AM |
|
I have some HEX8A1 130 and I was planing to buy more mining power, and now I see one technobit web page the Avalon Gen 3 based miners, and I dont know which one is better, if this one or the hex8a1. The price is lower but the hash power is lower too, maybe the difference is the power needed. I dont know which one to buy.
I don't think the avalon chips are better. + if you have already HEX8A1 and you are happy with it, continue with the A1
|
|
|
|
QuiveringGibbage
|
|
April 19, 2014, 02:38:57 AM |
|
Hey marto74, Would you care to comment on the quotes below? Particularly, aopa38's claim that different batches will perform differently? I understand ASIC chips have grades and h/w performance will vary between units; But do you grade your h/w and how is it distributed to your customers? Do some customers get favouritism over better performing h/w? How does one get the cream of the crop h/w? aopa38's 2nd claim is to run the HEX8A1 at 270GHs. Presumably this is Turbo, Turbo Mode. Is it recommended to run these units at 1050V? I know the numbers are possible, i've tried them, but the results are some what disconcerting that I ran my units at a lower V and F and still manage to get just under 260Ghs. Of cause I'll be happier running them at 270GHs if you say its not a problem. I'd like to see what h/w error rates you are getting when you run them at 270GHs. Please do tell Technobit advertises 260GHs " Hash rate - about 260 Gh/s overclocked in turbo mode" ( http://technobit.eu/index.php?id_product=63&controller=product&id_lang=1) and you are saying " 270 Gh/s overclocked in turbo mode"? So is this like turbo, turbo mode? I hate to be a troll but I am really not; Cause really, you are just exaggerating the facts to make financial gain. That's dishonest Prove I'm a troll and show me pics of you running those boards at 270GHs with min. H/W errors. Or you can tell me what freq and a V settings you are using to achieve those Hashing rates. Maybe it's cooler in Canada now then it it is in Australia. But iirc, it's Spring there atm? Cheers, QG It depends on which batch of boards you get from Martin at Technobit. The difference in the A1 chip between batches in particular is quite big.As for settings, 270 / 1050 will normally get you 270GH/s although in the past we have had some boards which can do it with less voltage. We run over 200 Coincraft boards in our converted warehouse with an ambient temperature of 28 C. They have run stable since the start of March. I'll update the thread with CGMINER stats ASAP. Cheers, QG
|
Bitcoin is at the tippity top of the mountain...but it's really only half way up..
|
|
|
marto74 (OP)
|
|
April 19, 2014, 08:21:37 AM |
|
The diference is comming from the diference in chips. We do not favor any body in terms of boards performance. What we do is to check on a test software how many engines are working. If there are more than 20 dead engines on a board it is stoped and returned for repair. Also if there is a single chip with less than 25 engines we stop it again
|
|
|
|
ElGabo
|
|
April 19, 2014, 04:23:26 PM |
|
Thanks the question! Hub is here. Yesterday I've restarted it and working since then. Now i won't touch until it stops, so I can post what dmesg shows, and I'll make the hub then. You had a good carma, the miner is afraid.. It will not stop Ops i have not said it That is how tplink works when done things are done right Non stop since last cgminer upgrade cgminer version 4.2.3 - Started: [2014-04-07 14:06:04] -------------------------------------------------------------------------------- (5s):1.986T (1m):2.124T (5m):2.259T (15m):2.160T (avg):2.100Th/s A:331377180 R:1003322 HW:3103982 WU:29338.8/m Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as Block: 5ea1ca8a... Diff:6.12G Started: [10:52:17] Best share: 239M -------------------------------------------------------------------------------- SB management [P]ool management ettings [D]isplay options [Q]uit 0: HEX8 0 : 230 860/ 862mV | 75.55G / 234.5Gh/s WU:3276.1/m 1: HEX8 1 : 230 860/ 859mV | 1.868T / 231.2Gh/s WU:3230.0/m 2: HEX8 2 : 230 860/ 870mV | 98.01G / 233.5Gh/s WU:3262.3/m 3: HEX8 3 : 230 860/ 859mV | 319.8G / 233.6Gh/s WU:3262.8/m 4: HEX8 4 : 230 860/ 869mV | 8.597G / 228.7Gh/s WU:3195.6/m 5: HEX8 5 : 230 860/ 863mV | 934.5G / 236.0Gh/s WU:3296.9/m 6: HEX8 6 : 230 860/ 858mV | 77.34G / 234.1Gh/s WU:3270.8/m 7: HEX8 7 : 230 860/ 858mV | 29.11G / 235.2Gh/s WU:3286.0/m 8: HEX8 8 : 230 860/ 862mV | 14.12G / 233.2Gh/s WU:3258.3/m --------------------------------------------------------------------------------
I'll post when something happens. (Hope nothing...) Only in btc world no news are good news Still no news....
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 19, 2014, 04:48:50 PM |
|
Nice to hear that dude
|
|
|
|
|