is RX Vega supposed to be 1300 kh/s range in cryptonote heavy?
in regular Cryptonight V7 i get 1800+ as i now swapped to sumokoin and cryptonight heavy im only getting 1200-1300 ,,, trying to keep HBCC activated but not sure if the other gpu's are breaking it or not.
Second big issue is RX580 doing 450-500 H/s but some with same bios are doing 800 kh/s, the memory allocated to system is around the same for each rig, any ideas? i did increase the virtual memory to 60GB for 6 rx580's that should be enough right?
cn-heavy is lower than cn, but very much depends on the miner RX580 should be 900+ if not 1k try SRBminer, on rx480 with Uber3.1 timings I get ~1k in both cn and cn-heavy and checkout Forager, in my signature, which will benchmark all of them and switch to the most profitable coin  |
|
|
|
cpuminer-opt-3.8.8.1
API displays hashrate before shares are submitted.
Thank you for this, it is helpful  In case you plan to implement Large/Huge pages (and I hope you do ), Verium miner which is based on cpuminer-multi, have implemented it for both Linux and Windows Assuming code efficiency for Verium is roughly the same, performance improvement is from 35h/s to 48h/s, which is ~37% Take a look https://github.com/fireworm71/veriumMiner/commit/d02684e361ccf1842402d08fc8cb406fcd3fbb36 |
|
|
|
|
interestingly, 2 cached threads with double-hash give almost the same performance with almost half the power usage and responsive system, so until I find a better combination, ill stop there )
|
|
|
|
A few things: Analyzing Processors topology...
Intel(R) Core(TM) i5-7600K CPU @ 3.80GHz
Architecture codename: Kentsfield For some reason a Kaby Lake is detected as Kentsfield even when using "--archi kabylake" Not sure if that even matters eventually and only visual, just strange And just wondering about the automatic logic On that processor for cn-heavy it allocated 4 threads which give roughly 40+40+8+8 h/s with 2 cached large pages and 2 uncached Since the processor has 6MB of cache, so I would guess that only 1 would be cached Or does the "cached" not mean the L3 cache? And while this gives the highest hashrate, I believe it's less efficient than lowering the number of threads to reduce CPU power consumption |
|
|
|
i am wondering why i have 2 instance when i mine with 3 x 570 and 1 x 580. can i put all gpu into one instance or not? if yes, how am i going to do it?
add device group definition to config.ini You can run DeviceList.bat to generate a string for your pc and modify it to your needs One group with 4 GPUs will looks like this: GpuGroups = [{"GroupName":"Ellesmere8","Type":"AMD","Devices":"0,1,2,3","PowerLimits":"0"}] |
|
|
|
Can u fix the url on MPH on monero pls? u have the wrong url. they change the url.
It's actually MPH report wrong urls in their api... |
|
|
|
hi bro, as promised, your tool is now cited on my Github page with a link to that topic, and as you requested i added a http server to monitor, to enhance integration - thanks! Thank you, new version and API support already committed to master branch |
|
|
|
when i tried to mine x16r, i get invaild shares. how do i stop getting it?
The miners used for x16r (also x16s) have benchmarking mode which uses a defined algo order to be able to get stable speed and when it submits shares, it gets invalid shares After initial benchmarking it should run normally I don't know why the dev decided the miner will actually submit shares in benchmark mode |
|
|
|
Is there a chance that 3.0 will have dual mine (preferably keccak/blake2s) ?
I do not understand why many people have the dual mining function waiting for phoenixminer 3.0, it is still possible with calymore dual miner. but what do you shoot with dual mining, costs much more energy and also less hashrate for eth and minimal earnings with the second coin.what do you shoot with this.i personally prefer a miner software that is economical with energy and stable works and high hashrate and more schares eth Agreed. I have little experience with mining, but lots tuning PC's with Windows and Ubuntu. I've tried and tried tweaking the settings on both miners. With Claymore's dual miner my ETH hashrate drops 10%, and the additional DCR only makes up for a mere fraction of of the loss. Energy usage is the same regardless of which mining software I use. So, obviously I'm sticking to phoenix. Dual mining, at least Claymore's miner, just don't make cent$. Dual mining is dead. ASICs killed that months ago. Nothing I've seen is profitable dual mining vs solo mining. Not only doesn't it cover the extra power used, it loses money, an increases heat. The dev of Phoenix should have stopped code for dual mining once it became clear it wasn't profitable anymore and focused on a linux version for the larger farms. Not completely but almost, and highly dependent on your power cost This includes power usage calculations: Algorithm Coin Miner StatsSpeed PwLim Watt USD/W mBTC/Day USD/Day Profit/Day PoolFee MinerFee Pool Loc.
--------- ---- ----- ---------- ----- ---- ----- -------- ------- ---------- ------- -------- ---- ----
Ethash_Keccak|08 ETH_MAX A-ClayDual-11.7 29.21 mh/233.7 mh 100 143 0.0113 0.20695 1.90 1.61 USD 0.90% 1.50% W-MPH/W-MPH EU
Ethash ETH A-Phoenix-2.9e 29.54 mh 100 102 0.0145 0.18440 1.69 1.49 USD 0.90% 0.65% W-MPH EU
Ethash_Blake2s|60 ETH_Blake2s A-ClayDual-11.7 29.31 mh/1.759 gh 100 145 0.0102 0.19205 1.76 1.47 USD 0.90% 1.50% W-MPH/NH EU Although last week Ethash_Blake2s was still above Ethash only |
|
|
|
However, I have noticed that forager will attempt to connect to us-east.hub.miningpoolhub.com:20580 and europe.hub.miningpoolhub.com:20580 and times out on both before connecting to miningpoolhub. Unsure if this is a problem with miningpoolhub, I was unable to find the relevant code to where this url would be.
Ok, found the issue with mph, they report incorrect Urls on their API since last monero fork Ill add a fix to the pool edit: fixed in master branch and reported to MPH |
|
|
|
Tried starting it up, it starts mining zcash and never tries anything else, despite being very low in terms of profits.
That is very strange and I would need more if this is indeed happening Can you provide log output and profits screen? |
|
|
|
Forager 1.2 released https://github.com/yuzi-co/Forager/releasesChanges: - New and Updated Miners: - Ccminer Allium, JCEminer, zFast, Bminer, Excavator, SRBminer, Avermore, SuprminerSP - Support for miners with limited pool support: Excavator - NH only, zFast - MPH only - CPU feature detection for Cpu miners - Gpu Groups created by Device name + Memory amount (example: Ellesmere8), to better benchmark mixed rigs - DeviceList.bat generates suggested GpuGroups that you can use as is, or modify to your liking - Corrected miner fee calculations - Correctly detect fee changes for 2/3GB cards with Claymore Eth - Support excluding algos for Hashrate watchdog - All miners have SHA256 checksum verification - Some optimizations and small bug fixes |
|
|
|
Forager 1.1 released https://github.com/yuzi-co/Forager/releasesChangelog: - Improve Afterburner error reporting and handling - Update WhatToMine, FairPool pools - Update Ethminer, Avermore, zFast, Xmrig cpu, Xmr-Stak-Aeon, SgminerKL, Sgminer4ward - Change mining wallet validation on pools to warning - Some device detection fixes - Download fixes for some miners - Code fixes |
|
|
|
Hi there,
Is there an argument to specify the number of threads to use? Or is there documentation on available arguments that I didn't find?
"cpuminer -h" will list all options "cpuminer -t" will set number of threads |
|
|
|
Hi,
How i can select GPU 10 , 11 , 12 , 13? I try to use -di 10,11,12 but the miner use the GPU 1 , GPU 2.
Best regards
change to Hexadecimal 10 -> A 11 -> B etc... |
|
|
|
Tried out your miner, i like these multiminer things few issues: 1: http://www.gandalph3000.com/ gets webaccess blocked on my ESET, i dont really wanna whitelist a random site for downloads... This is official website of Cast XMR miner, which it tries to download. And ESET probably blocking it for distributing "Evil Crypto Miners" Even if it is moved, there is no guarantee that it will not be blocked sometime again 2: yuzi-co github mkxminer 310.zip download fails after taking forever to do so (few minutes,time is money  ) . deleting the json file for it bypassed this error for me as a workaround for now. all other downloads seem fine. failing to delete the json file resulted in endless download loop tho This one is the largest miner in my collection, for reason unknown to me the developer made it weight close to 100MB, so depending on your connectivity it might take ages I will check timeout parameters, perhaps I can solve this 3: i cant make CPU mining work, even tho i ENABLED it in my config.ini 8700k. tried with option "99" to see if any pools would use it, but nope This is strange, I'll recheck the logic anyways, nice tool, hope its OOB usable for me one day Thank you, and keep watching, I'm constantly updating |
|
|
|
Looks nice, are there any of your own fees included in this?
By default it is set to 10 minutes per day, but it can be changed based on your generosity in config.ini # Number of minutes to mine as a donation each day (default is 10 mins which is ~0.7%)
Donate = 10
can i use on rx550 ?
can i use without AB ? because AB not works with > 8 GPU
how to integrated with other pools ? (not on list)
regards
Specific miner may or may not support specific card, but Forager doesn't have limitations for specific cards I tested even Intel integrated GPUs, but disabled it in code due to extreme inefficiency AB integration is not necessary and is OFF by default You can run "DeviceList.bat" to see detected devices to verify all your cards are detected Without AB you will not get exact power consumption readings, but you can edit "Includes\amd-cards-tdp.json" to add estimated TDP of your card to get cost estimations I will add more cards to the default file based on official TDP numbers Additional pools can be added in MyPools.ps1 (see existing examples there) If a pool provides profit estimations, and is large enough, I will consider adding it to Forager |
|
|
|
Why there is no one Claymore's miner?
All Claymore miners are already there ClayCrypto-11.3 (AMD) ClayDual-11.7 / ClayETH-11.7 (AMD,NVIDIA) ClayNeoScrypt (AMD) ClayZEC-12.6 (AMD) ClayCrypto-4.0 (CPU) Did Claymore release any other miner that is missing (apart from Claymore XPM)? Ohhh. Sorry. I just read on 1st post and there is no info about them... Yeah, I did post only the changes from Megaminer, but in all I have 70+ unique miners. The chance is if you want it - I probably have it |
|
|
|
Why there is no one Claymore's miner?
All Claymore miners are already there ClayCrypto-11.3 (AMD) ClayDual-11.7 / ClayETH-11.7 (AMD,NVIDIA) ClayNeoScrypt (AMD) ClayZEC-12.6 (AMD) ClayCrypto-4.0 (CPU) Did Claymore release any other miner that is missing (apart from Claymore XPM)? |
|
|
|
|
Show Posts
