Yeah fuck that stealing, scammy shit pool. It amazes me how many people actually still mine there  Same here,Decleration for steal more  ) |
|
|
|
|
Same here, too much stale shares.
|
|
|
|
|
Srbminer have supoort for oc options(lock core clock,offset and voltage settings) for both nvidia and amd on windows?
|
|
|
|
Is there any option to control power consumption on AMD cards in miner, without me having to resort to manual adjustment in Catalyst Driver or Bios Mod? Mem clocks? Core Clocks? Power Limit? Here, in my case, this is essential. Tks...  Try OverdriveNTool. overdrive ntool outdated,not supported new drivers. |
|
|
|
|
when will R mode ready for Windows?
|
|
|
|
|
any tips for using pcie splitters 1x4 x ones? i will built 12 gpu setup with 2 pcix 1x4 ones.Which slots should i use ?
|
|
|
|
1.41b works good
Same here 1.41b fix toncoin(pool:tonwhales) |
|
|
|
Update to 1.40 that is solved
i got same issue on 1.40 Same here with 1.40 v. too. just tried danillaminer ,it works ,%100 miner based problem. |
|
|
|
Update to 1.40 that is solved
i got same issue on 1.40 Same here with 1.40 v. too. |
|
|
|
|
bug report, Windows 10 ,5600xt vs 5700 mix rig --cvddc don't work on 5600xt 's, 5700's are ok!! tried many verssions of driver and all versions of phoenix.. Teamredminer works correctly on same rigs.
|
|
|
|
owned 100+ sapphire 470-480 from 2016 ,just one died ,all others still working without any problem,gigabyte and asus strix have the worst fans,sleeve bearings fans dies very quick, changed fans 2 times already with this brands.  .never problem with referance blower fans. |
|
|
|
Both of them is Pc partner group,Amd side Sapphire, nvidia side Zotac, Inno3D, and Manli.Sapphire is one of the best amd partner.(for me Best) |
|
|
|
|
Check your vmem temp,increase your fan speed.
|
|
|
|
Got 4 3070ti 's sweet spot is 172mh (145-155w depends on luck) for Ergo which is the most prof. algo for lhr nvidia gpus.   |
|
|
|
|
what's the recommend driver for windows which supports overdrive ntool,pls add voltage -clock support for miner ,Trm not new ....
|
|
|
|
|
Gigabyte 3080 Gaming Thermal pad moded both side.(12.8mwk)
Hash 101.32 MH
Temp core 65° mem 90°
rpm. 75%
Core 0
samsung Mem Windows +1350
Watts 232w
|
|
|
|
Gigabyte Aurus Master 3080 Backplate 3mm(double 1.5mm) memory 1.5mm ordinary pad. 6mwk   |
|
|
|
Aurus Master (thermal pad moded) without mod thorttle  Hash 99.12 MH Temp core 55° mem 108° rpm. 90% Core 0 samsung Mem Windows +1200 Watts 221w |
|
|
|
Hey guys, After successfully tweaked a RX 480 8gb to do ~29 mh/s @ 85w, I got hands at a RX 5600 Asrock, with with the following settings: - cclock= 1400 MHz - cvddc= 930 mV - mclock= 1800 MHz - mvddc= 850 mV Getting 39.143 MH/s and Effective speed @ ethermine ~ 39.73- 45 mh/s, consuming 103w and 200w @ the wall. And it's stable for about 49 hours straight. Does someone has a better config? I was playing around on some clocks and vddc but this are the only ones that I found that were stable enough to make through a +24hrs. FYI, just waiting for some risers to throw the both AMD's and a Gigabyte 1060 on a rig - cclock= 1050 MHz - cvddc= 650 mV - mclock= 1860 MHz moded bios 43.8mh |
|
|
|
So here are some examples:
Re-padded Gigabyte OCs 3080 with Thermal Grizzly 8 Pads:
98°C, 98°C, 94°C, 96°C
Stock ASUS TUF OCs 3080:
100°C, 104°C, 106°C, 104°C.....
I dont like that. Should I consider doing a pad replacement on the ASUS, too? Worry about warranty.
I used gelid extreme and saw drops from 110 the 80’s from stock... applied to all or,just memory heatsink ? |
|
|
|
|
Show Posts
