SRBMiner-MULTI AMD & NVIDIA & INTEL & CPU miner

[Frmg]

Is there any option to control power consumption on AMD cards in miner, without me having to resort to manual adjustment in Catalyst Driver or Bios Mod?
Mem clocks? Core Clocks? Power Limit?
Here, in my case, this is essential.
Tks...  

[coin790]

i tried to mine kawpow algorithm from my r5 m330 but there is no support for my card. I have an old gpu and I would like to take advantage of it, could you help me?
I tried to mine bitcoin but I know it's crazy to do it from a graphics card. I don't understand why only r9 cards and not r5 I just want compatible software for my r5 gpu it would be something interesting.

[deedeeranged]

i tried to mine kawpow algorithm from my r5 m330 but there is no support for my card. I have an old gpu and I would like to take advantage of it, could you help me?
I tried to mine bitcoin but I know it's crazy to do it from a graphics card. I don't understand why only r9 cards and not r5 I just want compatible software for my r5 gpu it would be something interesting.

Your laptop graphics card only has 2GB memory as stated on https://www.techpowerup.com/gpu-specs/radeon-r5-m330.c2681

Might be the reason.

[doktor83]

V1.0.7
+ Added algorithm 'pufferfish2bmb' (BMB - Bamboo) for GPU mining [ rdna2 only ], fee 1.00%
+ Small performance increase on 'pufferfish2bmb' algorithm for CPU's
+ Reduced devfee for 'autolykos2' (ERGO) to 1.00%
+ Possible fix for 'Can't switch to algorithm 1' issue when using --multi-algorithm-job-mode 3
+ Bug fixes

[StevenUniverse]

Thanks for your hard work guys.

Question: Today I downloaded the latest version and in the help.bat I don't see the commands for API statistics. In my bat from previous versions (0.8.0) the commands were --api-enable --api-port

What is the command for the new version of SRB?

[deedeeranged]

Thanks for your hard work guys.

Question: Today I downloaded the latest version and in the help.bat I don't see the commands for API statistics. In my bat from previous versions (0.8.0) the commands were --api-enable --api-port

What is the command for the new version of SRB?

Stil the same.
Run xmrig --help from terminal or command line.

[doktor83]

V1.0.8
+ Added algorithm 'blake3_ironfish' (IRONFISH coin) for CPU/GPU mining, fee 0.85% *
+ Added ETHASH/ETCHASH + BLAKE3_IRONFISH dual mining mode
+ Added AUTOLYKOS2 + BLAKE3_IRONFISH dual mining mode
+ Added algorithm 'pufferfish2bmb' for RDNA cards [ 5xxx ]
+ Performance increase on 'autolykos2' algorithm for RX5700/XT GPU's
+ Small performance increase on 'kaspa' algorithm for RDNA cards [ 5xxx ]
+ Algorithm 'autolykos2' possible fix for situation when miner isn't creating dataset
+ Algorithm 'autolykos2' now uses 1 thread per GPU as default (was 2) - hashrate should be more stable
+ Possible fix for miner crashing when it's trying to reconnect to the pool

***
Algorithm 'blake3_ironfish' stratum implementation does not send back a message to the miner if share was accepted/rejected, so
you won't have statistics about this in the miner - only how many shares were sent to the pool.
Tested on zk.work pool.

Ironfish is at the moment running at an incentivized testnet.

[iBook]

Is there any option to control power consumption on AMD cards in miner, without me having to resort to manual adjustment in Catalyst Driver or Bios Mod?
Mem clocks? Core Clocks? Power Limit?
Here, in my case, this is essential.
Tks...  

Try OverdriveNTool.

[matejbilahora]

Mining Bamboo (https://bitcointalk.org/index.php?topic=5372707.msg60808933#msg60808933 , https://discord.gg/tNKcfjWttj ) on my RX5600 and it runs nice, but my Ryzen7 3800X is much better, so I think that CPU is for the time much better option. Thank you for your work

[doktor83]

V1.0.9
+ Added algorithm 'pufferfish2bmb' for Polaris/Vega cards
+ Performance increase on 'sha512_256d_radiant' algorithm for GPU's
+ Reworked ZIL mining modes*
+ Added automatic caching of ZIL DAG for ETHASH/ETCHASH + ZIL (if GPU has enough VRAM to hold both DAG's)
+ Added nicehash compatibility for algorithm 'verushash'
+ Added parameter '--disable-auto-affinity'
+ Bug fixes

***
ZIL can be mined in a few ways :

1. ETHASH/ETCHASH + ZIL [ mining ETHASH/ETCHASH until ZIL time, then it switches to ZIL, mines it, and returns to ETHASH/ETCHASH mining. Uses a pool that automatically does the switching, ezil.me for example]
2. ZIL + Any algorithm [ mines the second algorithm until it's ZIL time - then it switches to ZIL, mines it, and returns to second algo mining when done with ZIL ]
3. ETHASH/ETCHASH + ZIL + ALPH/IRONFISH/HEAVYHASH/KASPA/RADIANT [ mines ETHASH/ETCHASH + ZIL on ezil.me for example, with the second algorithm simultaneously. ETHASH/ETCHASH + ZIL uses a pool that automatically does the ZIL switching, ezil.me for example ]

Examples:

1. ETCHASH + ZIL
--disable-cpu --algorithm etchash --pool stratum+tcps://eu.ezil.me:24443 --wallet etc-wallet.zil-wallet

2. ZIL + KASPA
--disable-cpu --a0-is-zil --algorithm etchash --algorithm kaspa --pool stratum+tcps://eu.ezil.me:24443 --pool ru.acc-pool.pw:16061 --wallet etc-wallet.zil-wallet --wallet kaspa-wallet

3. ETCHASH + ZIL + RADIANT
--disable-cpu --algorithm etchash --algorithm sha512_256d_radiant --pool stratum+tcps://eu.ezil.me:24443 --pool stratum-eu.rplant.xyz:7086 --wallet etc-wallet.zil-wallet --wallet radiant-wallet


Notes :
--a0-is-zil can be used only for case nr. 2! [ ZIL + Any algorithm ]
If you don't have enough VRAM for ZIL DAG + second algorithm's memory requirements, add --gpu-buffer-mode 1 to your cmd parameters

***
--disable-auto-affinity

Use this parameter if you have a multi node CPU, and the automatic affinity setup isn't working the way you want it.
You will need to run a miner instance per node, and define --cpu-threads manually.

Example in Windows :
start /NODE 0 /B /W SRBMiner-MULTI.exe --disable-auto-affinity --disable-gpu --cpu-threads 48 ...
start /NODE 1 /B /W SRBMiner-MULTI.exe --disable-auto-affinity --disable-gpu --cpu-threads 48 ...

[fenomenyaa]

Is there any option to control power consumption on AMD cards in miner, without me having to resort to manual adjustment in Catalyst Driver or Bios Mod?
Mem clocks? Core Clocks? Power Limit?
Here, in my case, this is essential.
Tks...  

Try OverdriveNTool.

overdrive ntool outdated,not supported new drivers.

[angelbbs]

SRBMiner-MULTI.exe --algorithm verushash --pool stratum+tcp://verushash.auto.nicehash.com:9200 --wallet *************.worker1 --password x --nicehash true
[2022-10-04 00:28:17] NAUGHTY5

Clean Windows installation. WTF?

[doktor83]

SRBMiner-MULTI.exe --algorithm verushash --pool stratum+tcp://verushash.auto.nicehash.com:9200 --wallet *************.worker1 --password x --nicehash true
[2022-10-04 00:28:17] NAUGHTY5

Clean Windows installation. WTF?

It's not a clean install if you have windivert service installed, cause that's what NAUGHTY5 indicates.

[angelbbs]

SRBMiner-MULTI.exe --algorithm verushash --pool stratum+tcp://verushash.auto.nicehash.com:9200 --wallet *************.worker1 --password x --nicehash true
[2022-10-04 00:28:17] NAUGHTY5

Clean Windows installation. WTF?

It's not a clean install if you have windivert service installed, cause that's what NAUGHTY5 indicates.

KMSAuto uses WinDivert driver...

[hugeD]

  many of my AMD cards from 580 to 5600xt 5700xt 6600xt 6700XT are running SRBMiner error,shows like
 
no compatible devices found
Gpu tweaking disabled
 NAUGHTY5

Detecting OpenCL devices...

GPU0 : amd_radeon_rx_580_2048sp              [ellesmere    ][MEM:  8192 MB][CU: 32][BUS: 01]

======================================================================
SRBMiner-MULTI 1.0.7

Press 's' to display stats
Press 'h' to display hashrate
Press z-v to disable/enable algorithm 0-3
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
======================================================================

Algorithm/s         : ethash+kaspa [0.65% fee]+[0.85% fee]
Gpu mining          : enabled
Cpu mining          : disabled
Watchdog            : enabled
Gpu tweaking        : disabled

[2022-10-04 10:34:03] Gpu tweaking disabled - no compatible devices found
[2022-10-04 10:34:23] A0|GPU0 | [BUS:01] [I:         22]
[2022-10-04 10:34:23] A1|GPU0 | [BUS:01] [I:          1]

[Kareli]

timeout /t 30
setx GPU_MAX_HEAP_SIZE 100   
setx GPU_MAX_USE_SYNC_OBJECTS 1   
setx GPU_SINGLE_ALLOC_PERCENT 100   
setx GPU_MAX_ALLOC_PERCENT 100   
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100   
setx GPU_ENABLE_LARGE_ALLOCATION 100
setx GPU_MAX_WORKGROUP_SIZE 1024
@echo off
cd %~dp0
cls
"H:\xxx\yyy\SRBMiner106\SRBMiner-MULTI.exe" --disable-cpu --algorithm ethash --gpu-id 2 --pool somepool --wallet xxxxxxxxxxxxxxxxxxxx   --api-enable --api-rig-name blabla --gpu-intensity 22 --send-stales false
pause
rem --gpu-intensity 21
rem --gpu-auto-tune 1


if you use admin privilages you must write miner location in double quotes

working since 2021

[doktor83]

V1.1.0
+ Performance increase on 'sha512_256d_radiant' algorithm for GPU's
+ Small performance increase on 'sha512_256d_radiant' algorithm in DUAL mining modes [ ETHASH/ETCHASH/AUTOLYKOS2 ]

[BoozyTalking]

V1.1.0
+ Performance increase on 'sha512_256d_radiant' algorithm for GPU's
+ Small performance increase on 'sha512_256d_radiant' algorithm in DUAL mining modes [ ETHASH/ETCHASH/AUTOLYKOS2 ]

What is the reason for such algo? All these shit-algos are scam. It is already mined with fpga or even some private asics.
I try to mine it with 6 gpus for more then 24 hours. Block difficulty is about 10Phash, maximal share difficulty generated
by my gpus was about 3T, so you need about 300-500 RTX3090 to find blocks. Electricity cost is too high to spend it for that algo.

[TouchFreak]

Hey guys,

I need your help. I user an older version of SRBMiner some months ago and now I always got the same errors. Do you have any Idea for a good fix?

First I will show you the Mining log:

CPU0 : AMD EPYC 7702P 64-Core Processor [L3:  16384 KB][L2:  2048 KB][L1:  256 KB][PU:   4]

======================================================================
SRBMiner-MULTI 1.1.0

Press 's' to display stats
Press 'h' to display hashrate
Press z-v to disable/enable algorithm 0-3
======================================================================

Algorithm/s         : randomx+randomx+randomx+randomx [0.85% fee]+[0.85% fee]+[0.85% fee]+[0.85% fee]
Gpu mining          : disabled
Cpu mining          : enabled
Watchdog            : enabled
Huge-pages          : available
HW-Aes              : available

[2022-10-16 22:15:00] MSR tweaking enabled
[2022-10-16 22:15:00] If miner crashes try setting --msr-use-preset parameter manually
[2022-10-16 22:15:00] Algorithm 0 available values for --cpu-threads-intensity : 1
[2022-10-16 22:15:00] Algorithm 1 available values for --cpu-threads-intensity : 1
[2022-10-16 22:15:00] Algorithm 2 available values for --cpu-threads-intensity : 1
[2022-10-16 22:15:00] Algorithm 3 available values for --cpu-threads-intensity : 1
[2022-10-16 22:15:01] 4 CPU core/s - 4 thread/s detected
[2022-10-16 22:15:01] Using 1|1|1|1 thread/s for CPU mining
[2022-10-16 22:15:02] SSL/TLS connection established with randomxmonero.auto.nicehash.com:443 [TLS_AES_256_GCM_SHA384]
[2022-10-16 22:15:02] Connected to randomxmonero.auto.nicehash.com:443 [randomx]
[2022-10-16 22:15:02] Difficulty 173576.0000000000 [randomx][0]
[2022-10-16 22:15:05] Connected to randomxmonero.auto.nicehash.com:9200 [randomx]
[2022-10-16 22:15:05] Difficulty 173576.0000000000 [randomx][1]
[2022-10-16 22:15:08] SSL/TLS connection established with randomxmonero.auto.nicehash.com:443 [TLS_AES_256_GCM_SHA384]
[2022-10-16 22:15:08] Connected to randomxmonero.auto.nicehash.com:443 [randomx]
[2022-10-16 22:15:08] Difficulty 173576.0000000000 [randomx][2]
[2022-10-16 22:15:11] Connected to randomxmonero.auto.nicehash.com:9200 [randomx]
[2022-10-16 22:15:11] Difficulty 173576.0000000000 [randomx][3]
[2022-10-16 22:15:11] Job received [00000000d95efca0] block height 2734985 [randomx][3]
[2022-10-16 22:15:14] RX Cache   initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:14] RX Dataset initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:14] RX Initialization time on node 0 : 12148 ms [randomx]
[2022-10-16 22:15:18] Job received [0000000056a8c973] block height 2734986 [randomx][0]
[2022-10-16 22:15:29] RX Cache   initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:29] RX Dataset initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:29] RX Initialization time on node 0 : 15181 ms [randomx]
[2022-10-16 22:15:29] Job received [000000002f09c1ae] block height 2734986 [randomx][1]
[2022-10-16 22:15:48] RX Cache   initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:48] RX Dataset initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:48] RX Initialization time on node 0 : 18996 ms [randomx]
[2022-10-16 22:15:48] Not enough free memory available to allocate dataset on node 0 [randomx]
[2022-10-16 22:15:48] Worker thread 1 stopped
[2022-10-16 22:15:48] Worker thread 0 stopped
[2022-10-16 22:15:48] Dataset 0 released
[2022-10-16 22:15:48] Cache 0 released
[2022-10-16 22:15:48] Dataset 0 released
[2022-10-16 22:15:48] Cache 0 released
[2022-10-16 22:15:48] Dataset 0 released
[2022-10-16 22:15:48] Cache 0 released


I always get the memory error. I would like to fix it. Any idea? The error always comes on the same line. I tried to reduce cpu-threads. That didn't worked because I would like to use 4 times Connection to the mining pool. I used two times startum+tcp and two times stratum+ssl. I used the guided-setup.sh for configuration. Before that I did it on another way. Please help me.

Best regards

[BoozyTalking]

Your mining command line for miner is brainless, why you set 4 algos for mining?