can anyone GIVE A list of Current NODES?  -digeros |
|
|
|
I cannot figure out how to mine any ALT currencies with my ASIC USB miner and CGMiner...most of them use scrypt and when i try to use that with cgminer-nogpu.exe i get a "unrecognized option" error. Any help?
WOW --- i guess intelligence or Computer competence is no prerequisite for being a senior member in these forums... you haven't figured out the PRIMARY Reason the Script Coins were developed was to avoid the ability to be mined by ASIC devices.... WHAT are you stupid? Blind? or Willfulling ignorant??? I have to wonder??? |
|
|
|
GOOD NEWS THEN.... Also on coinchoose.com  Cryptsy Quote 0.00008353 BTC / PHS .... WTB in lots of 1000 verified good block chain PHS for 0.00009BTC or 0.09BTC per 1000PHS - Digeros pm me and be ready to send a test PHS if we go forward. |
|
|
|
F... THAT quote 0.1 per 1000 PHS!!! thats what I bought a few thousand for BEFORE the network was secured by checkpoints... HOLDing out for something better like 0.3-0.4 BTC per 1000PHS.... let all the pump and dumper's crap out ... I think that this PHS is the POW/POS -script WINNER power of POW Stability of a decent POS rate of generation to motivate people to open their wallets... adding stability to the network, Proper payment without excessive inflation... some find 50% annual interest excessive BUT WHEN Venture (Vulture) Capitalists demand 20% annual return (calculated of course, by taking the founder's "calculated numbers" and dividing potential revenues by 2 AND multiplying potential expenses by 2).... So you see how brutal AMERICAN Venture capital can be... So a 50% annualized return on "saved coins" that ADD to the Security and Stability of the Coin Network IS A GOOD COMPROMISE in my most humble opinion... Crypto currency are definitely still VERY speculative investments for sure...- digeros PS. Thoughts on "HOLDING OUT FOR SOMETHING BETTER": watch "Why shouldn't I work for the NSA? from Goodwill Hunting... on youtube.com at http://www.youtube.com/watch?v=UrOZllbNarw-digeros |
|
|
|
I have restarted the stratum instance on www.miningpool.co - should be working normally again. You should also check your SQL DB as I think I was gettting errors about DB dead or disconnect when i tried to mine there last week... - digeros |
|
|
|
Just reviewing www.bitCanary.com since launch... Received more orders that I thought, want to thank you all for your continued support for bitcoin. I'm sure you have seen recent developments and our future looks bright! Thank you!! Canary That's what happens when you go mainstream web (these BBS's are still geeky enough to keep the vanilla people out)... web interface convinces a lot of people that you are legit.. glad I got my Blade before the website launched ... sure you are overloaded... possibly with orders from Connecticut and NY and Texas and Florida now that Germany has recognized Bitcoin as a digital investment commodity thanks for the great service and delivery as well as follow up support, Canary YOu Rock!!! - digeros |
|
|
|
CGB block reward halves every month or so.
Bitcoin block reward halves every 3-4 years.
CGB gives no time for itself to become established and become useful to create enough transaction fees to sustain a secure network.
So what are you saying? That CGB halves itself into oblivion? Did you come up with that reasoning all by yourself or did you get help? Bitcoin has no POS. Bitcoin has no PO'L' (longevity). Bitcoin is the first chapter in a book that is best known for its twisted ending. Bitcoin is a big stone wheel, relentlessly being pushed along by the blind, leading the blind in tow. Bitcoin was yesterday!....who knows what is today....and who knows what is tomorrow?? Bitcoin is so slow that I could send one of my pigeons to make a transaction, and return the receipt before the first confirm. Bitcoin will ever so slowwwwly become obsolete. An antique, a novelty item. Bitcoin is a relic to those who have buried it, but still a treasure to those who discover it. Bitcoin is a template, a design, a seed, an origin. Bitcoin is an insight, a beginning, a doorway to a whole new meaning. Bitcoin is the giants shoulders on which we stand......but nothing more than this. Some people are ignorant. Some people are stubborn. Some people are stupid. Some people have just arrived, and some are leaving. Some people are just looking ahead to the future, to make our dreams come true. Exactly Killiz!!! Bravo, I could not Agree more --- I cant believe how long transactions are starting to take on the BTC network and actively exploring alt-coins as further experiments on this idea of a secure blockchain based coin and the different methods used to secure the infrastructure of the coin... Can I quote you elsewhere I am going to have it ticker across my laptop screensaver... it is quite brilliant and poignant. - digeros |
|
|
|
Really?? Again with the useless walls of text and ignorant talk how CGB (or any other coin) is bad in some way? Drop it, nobody cares about your nonsense. We love CGB, even more for its rarity  How do you think it compares to BitBar??? a POW-POS script hashing coin DOes CGB give a POS stake payment in Coins??? What effective annual rate??? - digeros |
|
|
|
Bum.. hmm. I had something similar at first. I had to kill power and restart the blade a few times and suddenly it started going again.
Got it all going. Thanks So much PLESK for your info on setting up the stratum that was VERY CLEAR... But now I get a Good hashrate but not Topping out at 13Gh/s more like 10.8Gh/s after three hours running and I am running on low clock as I found that efficiency Went DOWN when I changed Clock to High Clock.... so How do I get that other 2 Gh/s out of the hardware... already running a stratum server on my mining rig. thoughts??? also ???How do I configure the system(or the Stratum Server) to LOAD BALANCE my hash among several servers to optimize getwork and submission??? -digeros Good to hear! I hate to see blades just sitting around doing nothing . The Low clock will indeed top out around 10.8 GH/s and the High clock will allow hashing at 13 GH/s. However, High clock will not work (as you have noticed) unless you increase the voltage on the blade. Without a voltage increase you will indeed see the efficiency go down as the chips do not have enough power to operate properly at High clock. DISCLAIMER: I'm not responsible if you fry your blade, computer, house, hair, etc. To tweak the voltage you will need a multimeter. I used this one but pretty much any will do: http://www.oreillyauto.com/site/c/detail/EQU1/3300/N1001.oapThis pic here tells you pretty much all you need to know about tuning voltage: http://i44.tinypic.com/2iicpac.jpgSome additional notes: - Set your multimeter to the "2" setting in the DC V section of the multimeter dial. - be sure the negative (black) probe on the multimeter is reading from the screw on the connector where the negative (black) wires are connected in. Do NOT measure from a different PSU connector as results will be incorrect. - be sure the positive (red) probe on the multimeter touches the "inside" of the gap between the larger (inductor?) and the smaller (capacitor?) as pictured. I found the probe could be rested in the space between and touching the 3 electronic gadgets there.. this made it easier to rest the probe during adjustment. - Before you made actual adjustments, switch the clock to high (the blade will become inefficient for a bit, but the high clock will draw the correct amt of power so you can adjust properly) - voltage adjustment will need to be done 8 times per blade (same deal on all 8 blue voltage adjusters - and don't forget to move your red multimeter probe 8 times as well to the approprate location for each new blue voltage adjuster). you will need a very small "precision" screwdriver and you will turn it clockwise probably 10-20 turns to get the voltage up to 1.2v. if you keep the multimeter hooked up as you are doing the adjustment, you can watch the voltage rise as you turn the screw clockwise. I stopped at 1.203v on each of the 8 adjusters. You will probably need to restart the blades thru the web interface... maybe even kill power and turn on again.. but eventually you should see the Total MHS settle in around 13000.. tho this may take 1 hr or more. Also, cooling is more important when voltage is raised and running on high clock. Be sure you have good air flow on the heatsink as well as some air flow behind he blade also. Good luck! Thanks !!!  I found another 2.5Gh/s with a mini-screwdriver and multimeter...  Total MHS: 13016 Received: 0000056331 Accepted: 0000056265 Per Minute: 177.91 Efficiency: 099.88% Up Time: 0d,05h,16m,15s Current Server: 192.168.1.6:8122 Clock selected: High Chip: OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO An yes I HIGHLY recommend some Cooling on the Back of the Board as after about 4 hours of running on High Clock at 1.203V across all 8 pots on the Blade, the heat sink was hot to the touch and the back was radiating quite a bit of heat, so I HAD to add another fan (number 5 x120mmfans) to blow on the back of the board, quite directly and that has helped -digeros |
|
|
|
Bum.. hmm. I had something similar at first. I had to kill power and restart the blade a few times and suddenly it started going again.
Got it all going. Thanks So much PLESK for your info on setting up the stratum that was VERY CLEAR... But now I get a Good hashrate but not Topping out at 13Gh/s more like 10.8Gh/s after three hours running and I am running on low clock as I found that efficiency Went DOWN when I changed Clock to High Clock.... so How do I get that other 2 Gh/s out of the hardware... already running a stratum server on my mining rig. thoughts??? also ???How do I configure the system(or the Stratum Server) to LOAD BALANCE my hash among several servers to optimize getwork and submission??? -digeros |
|
|
|
I have 1K PHS that i mined in phs.minar.cc. I update the new wallet also i missed to update in my profile in the pool site. I checked status transaction on the pool, Coins sent and i did not got them. How the way i can receive again my coins? They may have been sent to an address with the wrong fork, many coins were generated with blocks on a fork during the period of time where there were many forks. If you have your wallet synced, and they don't appear, then those coin exist, but in a parallel fork, just like many blocks that were mined during that period. Thank you for your information. I have changed address 2 times on the pool (phs.minar.cc). I check in the first wallet, I show the transactions also with "?" and "n/a" in address. I repaired in console option of the old windows clients but it is not success. How the way can i get them again ? ANY JACK ASS STILL ON THE OLD CLIENT DOESN'T DESERVE ANY LOST COINS>>>> DUMBASS, KEEP YOUR SW UP TO DATE OR F... OFF... -digeros hi , the old clients are dead and have bad blockchains!, please do not use them! Please use the new client and get a totally new blockchain and then report results. You can see my signature for the newest client and the process to get a clean chain, this is very important. Also as a side note it might be better in the future to keep transactions smaller to lower risks, this holds true for all cyrptos |
|
|
|
I have 1K PHS that i mined in phs.minar.cc. I update the new wallet also i missed to update in my profile in the pool site. I checked status transaction on the pool, Coins sent and i did not got them. How the way i can receive again my coins? They may have been sent to an address with the wrong fork, many coins were generated with blocks on a fork during the period of time where there were many forks. If you have your wallet synced, and they don't appear, then those coin exist, but in a parallel fork, just like many blocks that were mined during that period. Thank you for your information. I have changed address 2 times on the pool (phs.minar.cc). I check in the first wallet, I show the transactions also with "?" and "n/a" in address. I repaired in console option of the old windows clients but it is not success. How the way can i get them again ? hi , the old clients are dead and have bad blockchains!, please do not use them! Please use the new client and get a totally new blockchain and then report results. You can see my signature for the newest client and the process to get a clean chain, this is very important. Also as a side note it might be better in the future to keep transactions smaller to lower risks, this holds true for all cyrptos Actually, the link is TOO LOW in your sig to be seen... - digeros |
|
|
|
9qacCzM71nnc3VcmhpY9eUGpx8bdbxu6cC
thanks
got yours, clown boy be patient !!! And I only Count 27 people on the list... NOT TO GOAL YET... I paid the one guy who went for the bonus... which is the 1st of 20 that show they are running Version 1.2.0.0 Beta3. So, go Tell your friends. |
|
|
|
Bum.. hmm. I had something similar at first. I had to kill power and restart the blade a few times and suddenly it started going again. Some other things to try: - Try connecting to that Server address & port using getwork on BFGMiner using Erupter USBs to ensure things connect. add "--no-stratum" into the command line on bfgminer to force it to use getwork. If you don't have Erupter USBs, try with a CPUminer or GPU miner or something to test worker setup & connectivity. - Be sure your default gateway and dns settings are set on the blade properly. I typically just type this at the command line in Windows "ipconfig /all" and copy the gateway and DNS that my computer is using. - Be sure your worker/password settings & syntax are correct. it should be [pool 1 worker name]:[pool 1 worker pass],[pool 2 worker name]:[pool 2 worker pass] - Try running a local stratum (I'd recommend this anyway to increase efficiency by 2-3% and save bandwidth) and connect to the pool's stratum connection. Then, connect your blades to the local computer running the stratum proxy.. https://github.com/slush0/stratum-mining-proxysome things to play with.. Good luck. tried all that... seems I have to set up a Proxy server on my machine.. But I am not sure of the work flow and configuration between command lining the start of the proxy mining server and tyhe configuration of the Blade in the Browser... What are the Configurations??? I am all BEFUDDLED as to What is Going Where and How Do I GET THIS THING GOING? Time is ticking and I am starting to stress.... - digeros Here is my command line for running stratum on my local machine: "mining_proxy -o stratum.addressofpool.com -p [stratumPort]" When you execute that you should see the stratum proxy start up in a command window and say something like "PROXY IS LISTENING ON ALL IPs ON PORT 3333 (stratum) AND 8332 (getwork)" This way you know it connected successfully to the pool's stratum server and is ready to give work to the blade. Now, find out the IP address of the computer which you executed this on (i.e. 192.168.0.9) a.k.a. local machine running stratum. FIREWALL: be sure the computer running stratum does not have windows firewall or some antivirus or network security which is blocking incoming connections to port 8332, this will cause your blade to fail to connect to the stratum on that computer. In your blade set-up web interface, put the IP address of your computer running stratum into the server addresses field: i.e. "192.168.0.9,192.168.0.9" (this assumes no backup pool, just one pool entered twice as primary and backup, which is fine for now.) Also in your blade's web interface, enter the following for Ports: "8332,8332" Also In your blade's web interface put the following in your user:pass field "fullworkername:workerpassword,fullworkername:workerpassword" (Remember the fullworkername usually includes your userid on the pool AND the workername, usually in the form "pooluserid.workerid" or maybe "pooluserid_workerid") so be sure to include all that, I am assuming your network settings are all correct: IP, gateway, DNS, etc. Now click "Update/Restart" on the blade's interface and the blade should take a few seconds to boot and begin hashing.. You will know it is hashing: - if you look at the stratum window on your computer and you see stuff moving/happening. - if your feel the blade getting warm - if you see your mining pool giving you credit for shares or possibly showing a hashrate - if you click "refresh" a few times on the blade, after a minute you should see the status on the blade's interface reporting some statistics. Especially if you see #s on the "Accepted" line, you are getting credited by the pool for mining =) Let us know how it goes OK i got it going buit the Efficiency and Hash Rate ARE NOT AS ADVERTISED<<< I AM running through a stratum server that is running a mining rig.... WHAT is Up with These Numbers? Total MHS: 05635 Received: 0000000795 Accepted: 0000000611 Per Minute: 093.52 Efficiency: 076.85% Up Time: 0d,00h,06m,32s Current Server: 192.168.1.6:8332 Clock selected: Low Chip: OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO and it gets worse efficiency if I go to HIGH CLOCK .,.... Nice. any Thoughts??? - digeros |
|
|
|
Bum.. hmm. I had something similar at first. I had to kill power and restart the blade a few times and suddenly it started going again. Some other things to try: - Try connecting to that Server address & port using getwork on BFGMiner using Erupter USBs to ensure things connect. add "--no-stratum" into the command line on bfgminer to force it to use getwork. If you don't have Erupter USBs, try with a CPUminer or GPU miner or something to test worker setup & connectivity. - Be sure your default gateway and dns settings are set on the blade properly. I typically just type this at the command line in Windows "ipconfig /all" and copy the gateway and DNS that my computer is using. - Be sure your worker/password settings & syntax are correct. it should be [pool 1 worker name]:[pool 1 worker pass],[pool 2 worker name]:[pool 2 worker pass] - Try running a local stratum (I'd recommend this anyway to increase efficiency by 2-3% and save bandwidth) and connect to the pool's stratum connection. Then, connect your blades to the local computer running the stratum proxy.. https://github.com/slush0/stratum-mining-proxysome things to play with.. Good luck. [/quote] /BEgin Edit I have set up a Proxy server on my machine.. I am using the command Line... mining_proxy.exe -nm -gp 8122 -o stratum.mining.eligius.st -p 3334 -cu bitcoinAddress -cp x I set the port to 8122 so I can still run Bitcoind without issues. Adding the -nm no midstate helped add some hash rate as I still cant find my multi-meter. Server is accepting shares of Diff 3 can I force that up to a DIFF = 4 with the Real Target command -rt??? Any one using this command on their stratum server serving a Blade. .... - digeros |
|
|
|
... Got my Blade today THANKS CANARY Great Job... Little issue... Blade will not show up the IP address given... I am on a mining server that may have some configuration issues ANY HELPFUL IDEA? -digeros go to command line and execute arp -a and post the output. this will list the ip's of all machines on your local network your pc can reach. the blade i believe has a static ip address of 192.168.1.254 with a web gui available at 192.168.1.254:8000/Main. if arp -a prints out addresses in a range other than 192.168.1.0/24 (192.168.1.1 to 255) then you may need to change the address scheme in your router (temporarily). as an aside, why the hell did AM config them with static ip and not dhcp? should be a part of any tcp/ip stack ~:[ did the arp - a and no 192.x.x.x IP adddress at all show up HOw do i change the router to make it see it??? - digeros follow canarys tidbit and just give your windows machine a secondary ip between 192.168.1.2 and 192.168.1.253. subnet mask should autofill to 255.255.255.0. save, then try going to http://192.168.1.254:8000/Mainchange the ip etc to match your network, enter your worker credentials, save restart. let her rip. after it starts working. change your pc ip back to normal by selecting get from dhcp for ip and dns. save and should be good? MSFT guide on doing so: http://windows.microsoft.com/en-us/windows7/change-tcp-ip-settingshere is my config page//// NO HASHES!!! Total MHS: 00000 Received: 0000000000 Accepted: 0000000000 Per Minute: 000.00 Efficiency: 000.00% Up Time: 0d,00h,00m,14s Current Server: 95.211.52.40:8332 Clock selected: Low Chip: OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO |
|
|
|
... Got my Blade today THANKS CANARY Great Job... Little issue... Blade will not show up the IP address given... I am on a mining server that may have some configuration issues ANY HELPFUL IDEA? -digeros go to command line and execute arp -a and post the output. this will list the ip's of all machines on your local network your pc can reach. the blade i believe has a static ip address of 192.168.1.254 with a web gui available at 192.168.1.254:8000/Main. if arp -a prints out addresses in a range other than 192.168.1.0/24 (192.168.1.1 to 255) then you may need to change the address scheme in your router (temporarily). as an aside, why the hell did AM config them with static ip and not dhcp? should be a part of any tcp/ip stack ~:[ did the arp - a and no 192.x.x.x IP adddress at all show up HOw do i change the router to make it see it??? - digeros |
|
|
|
30BEs (10GHs) received just now and are already hashing @ BitMinter. Thanks for excellent service, Canary!
There is one suspicious stick, showing too many HW errors. I need to find which one and monitor it in isolation a bit...
use bfgminer 3.1.4 if you aren't for a little bit. once it identifies them all as erupts, you can got into devices-> highlight the one with errors->and it. this will stop it hashing for about 10 seconds, turn the led on solid and you can find it hope this helped edit: forgot [ i ] is bbcode Yes sir!!! I requested that feature and Luke delivered!!!! I helped him test it for a little bit as well, but Luke did all the work and he gets all the credit  it's a fantastic feature that was missing Got my Blade today THANKS CANARY Great Job... Little issue... Blade will not show up the IP address given... I am on a mining server that may have some configuration issues ANY HELPFUL IDEA? -digeros |
|
|
|
Jude Austin has put up a test p2pool node for PHS
If someone has some hash to test...
Realtime Stats check it out!
http://204.10.105.89:16285/static/
Server:
http://204.10.105.89:16285
For username use a public KEY not a public address and password x or anything reallyWill update this when I know how to get a pub key to mine with In the console, setaccount PHSwalletAddress Accountname, this will set the receive address to that account in your wallet. Next, validateaddress PHSwalletAddress, will output the PUBKEY in the console, COPY this PUBKEY Next validatepubkey PHSPUBKEY and you should be good to go with mining with the pubkey linked to your account to your wallet. -digeros |
|
|
|
|
Show Posts
