Arctic Coin (ARC), No premine, Evolution over 1 year

[kaltun]

watching the coin is not easy to work with, for a person not possessing great knowledge in the the technical part, the additional complexity for me. Or it was originally intended to work with nodes only for professional techies?

Indeed, as a noob this not easy , i am stuck now??

is there an manual how to manage masternode with windows??

i found this :
https://steemit.com/arcticcoin/@bapparabi/arcticcoin-master-node-setup-earn-passive-income

but most of the command wont recognized by the wallet and gives me error like :

goldmine start-all

Method not found (code -32601)

who can help me ?

use goldminenode "command"

goldminenode genkey
goldminenode outputs
goldminenode start-all
goldminenode status

thank you, now the command are recognized but i didnt do it right , so i am gonna do the steps again.

thx again  

cool , i think my masternode is now online

i started the MN with the command:
goldminenode start-all  --> it says " results: succesfull"
goldminenode list-conf --> its say "status : Pre-ENABLED "
but when i check with
goldminenode status its say :
not capable goldmine: could not connect to x.x.x.x:7209

so what is it , is it working now or what

pls help

i see my node online and active on https://arcticcoin.org/goldmine-list , so i this is good ??

[asleep]

cool , i think my masternode is now online

i started the MN with the command:
goldminenode start-all  --> it says " results: succesfull"
goldminenode list-conf --> its say "status : Pre-ENABLED "
but when i check with
goldminenode status its say :
not capable goldmine: could not connect to x.x.x.x:7209

so what is it , is it working now or what

pls help

check your external ip and open firewall port 7209

i use this for reference https://arcticcoin.org/guides-goldmine
with my windows vps and ARC in my windows pc and all goes fine

[elmeijera]

Do need extra IP adrsses for multiple masternodes?

[dimitri]

Do need extra IP adrsses for multiple masternodes?

yes / since it's just one port for deamon / but I know some guys doing port binding and running multiple nodes on 1ip ..

[smsadiq]

Come to our exchange and buy shares in mining. 1 share in the mining gives 1 coin per day. Coins may sell or contribute and earn an income 1.2% daily

Want to get 300% profit in one day? Visit us on the exchange and buy coins for 0.1$ and sell for 0.4$, or not sell and make a contribution, may bring profit, 36% a month! Everything is in Your hands!!!

Where are we now with Arctic Coin (ARC)?

[elmeijera]

Do need extra IP adrsses for multiple masternodes?

yes / since it's just one port for deamon / but I know some guys doing port binding and running multiple nodes on 1ip ..

Thanks for the information... I have already 3 ip adresses on my vps so wil setup 2 more masternodes :-)

[kaltun]

hi, sinds yesterday  i managed the masternode , but i cant see any shit , i mean my masternode is in de list as active

at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode

my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a


but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?


my questions , am i to impatient and have wait little longer ? or did i do something wrong ??

[VincentR86]

hi, sinds yesterday  i managed the masternode , but i cant see any shit , i mean my masternode is in de list as active

at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode

my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a


but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?


my questions , am i to impatient and have wait little longer ? or did i do something wrong ??

Yes probably, just wait a couple of days and you'll be fine!

[kaltun]

hi, sinds yesterday  i managed the masternode , but i cant see any shit , i mean my masternode is in de list as active

at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode

my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a


but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?


my questions , am i to impatient and have wait little longer ? or did i do something wrong ??

Yes probably, just wait a couple of days and you'll be fine!

thx for the reply

couple days ??

darn , i like to see it in action , now i am seeying only gray wallet with only 1000 arc in balance....


but i will wait and check few days later ...

[Cantalupo]

Can you introduce your team?
Thank you

[shubaduba]

Do need extra IP adrsses for multiple masternodes?

I run 5 masternodes on same IP.

Here is .conf for all nodes.

#ARC02
listen=1
daemon=1
server=1
rpcuser=any
rpcpassword=any
rpcallow=127.0.0.1
rpcallowip=127.0.0.1
# You have to set different RPCport for each MN (1601, 1602, etc)
rpcport=1602
# ExternalIP set same internet public IP address for all MNs
externalip=77.7.7.7:7209
# Bind each MN to a separate port (7210, 7211, etc)
# Dont bind first MN, you can launch it on default 7209 port
bind=127.0.0.1:7210
goldminenode=1
goldminenodeprivkey=<goldminenode genkey result>

Your goldminenode.conf stay clear at all other MN's.
You need to fill it only for your control wallet.
ARC1 77.7.7.7:7209 <goldminenode genkey result> <transaction> <0 or 1>
ARC2 77.7.7.7:7209 <goldminenode genkey result> <transaction> <0 or 1>

Make a copy of your /&APPDATA/Roaming/ArcticCore and rename it to something like ARC1, ARC2, etc
Launch daemon for each new masternode with command:
arcticcoind -datadir=C:\Users\User\AppData\Roaming\ARC1 -daemon
arcticcoind -datadir=C:\Users\User\AppData\Roaming\ARC2 -daemon

Wait 5 minutes and check if daemon is synchronized:
arcticcoin-cli -datadir=C:\Users\User\AppData\Roaming\ARC1 mnsync status
arcticcoin-cli -datadir=C:\Users\User\AppData\Roaming\ARC2 mnsync status

Launch masternodes at your control (or first) wallet.

After 15-60 minutes check your masternodes status:
arcticcoin-cli -datadir=C:\Users\User\AppData\Roaming\ARC1 goldminenode status
arcticcoin-cli -datadir=C:\Users\User\AppData\Roaming\ARC2 goldminenode status

Use AM29x2gxn87PDFATN24jLgyrvX9kftiUpm to thank me

[kaltun]

hi guys, this bothers me alot

if i check the  goldminenode status


10:40:56

{
  "vin": "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
  "service": "x.x.x.x:7209",
  "status": "Not capable goldminenode: Could not connect to x.x.x.x:7209"
}


but  my masternode active and on the list

so , what is it good or wrong

[ArcticCoin]

Ask here https://discord.gg/KKdNvyu

[Cantalupo]

Ask here https://discord.gg/KKdNvyu

Hello friend, how are you?
Could you introduce your development team?

Thank you very much for your attention.

[rizorius]

Do need extra IP adrsses for multiple masternodes?

I run 5 masternodes on same IP.

Thanks for the great idea!

I've run goldminenode, more than 30hours, but still no transactions...
Masternode is enabled
How often are payment for this time?

[busiru]

please, write config for solo mining 
rpcport?

[rizorius]

please, write config for solo mining 
rpcport?

solo via Arctic wallet https://arcticcoin.org/guides-mining#mining_wallet

[busiru]

please, write config for solo mining 
rpcport?

solo via Arctic wallet https://arcticcoin.org/guides-mining#mining_wallet

solo gpu mining 

[rizorius]

As for solo GPU mining you can try loke this:

Settings on conf

    Arcticcoin.conf
    miningprivkey = xxxxx
    rpcuser = xx
    rpcpassword = xx
    rpcport = 41677
    port = 41678
    rpcallowip = 127.0.0.1
    rpcthreads = 1
    maxconnections = 1
    server = 1
    gen = 1
    listen = 1
    daemon = 1
    addnode = 104.131.143.116 : 7209
    addnode = 104.207.156.15: 7209
    addnode = 104.238.190.240: 7209
    addnode = 114.115.144.196: 7209
    addnode = 124.171.252.34: 7209
    addnode = 133.242.227.212: 7209
    addnode = 134.19.133.61: 7209
    addnode = 138.68.247.61: 7209
    addnode = 144.76.33.134: 7209
    addnode = 145.239.83.153: 7209
    addnode = 149.56.218.24: 7209
    addnode = 163.172.185.39: 7209
    addnode = 178.62.28.217: 7209
    addnode = 178.72.91.15: 7209
    addnode = 185.111.219.174: 7209
    addnode = 185.34.52.60: 7209
    addnode = 192.186.162.143: 7209
    addnode = 192.186.162.172: 7209
    addnode = 195.181.247.100: 7209
    addnode = 195.54.3.213: 7209
    addnode = 212.47 .228.42: 7209
    addnode = 212.66.40.19: 7209
    addnode = 31.132.224.42: 7209
    addnode = 31.202.231.26: 7209
    addnode = 35.176.192.38: 7209
    addnode = 36.80.132.25: 7209
    addnode = 37.120.173.93: 7209
    addnode = 38.69. 40,139: 7209
    addnode = 45.32.76.106: 7209
    addnode = 45.63.52.175: 7209
    addnode = 45.76.64.234: 7209
    addnode = 45.77.40.199: 7209
    addnode = 45.77.95.14: 7209
    addnode = 5.9.55.201: 7209
    addnode = 52.14.26.81 : 7209
    addnode = 62.176.10.136:7209
    addnode = 74.193.254.102: 7209
    addnode = 77.101.74.55: 7209
    addnode = 77.236.200.86: 7209
    addnode = 78.24.216.158: 7209
    addnode = 78.47.122.65: 7209
    addnode = 78.47.238.36: 7209
    addnode = 78.47.88.41: 7209
    addnode = 81.222.81.45: 7209
    addnode = 85,175,216,200: 7209
    addnode = 85,214,148,216: 7209
    addnode = 85.25.119.107: 7209
    addnode = 87.118.118.88: 7209
    addnode = 88.84.216.61: 7209
    addnode = 88.99.199.93: 7209
    addnode = 94.130.74.135: 7209
    addnode = 94.130.77.192: 72097209 addnode = 81.222.81.45: 7209 addnode = 85.175.216.200: 7209 addnode = 85.214.148.216: 7209 addnode = 85.25.119.107: 7209 addnode = 87.118.118.88: 7209 addnode = 88.84.216.61: 7209 addnode = 88.99.199.93: 7209 Addnode = 94.130.74.135: 7209 addnode = 94.130.77.192: 72097209 addnode = 81.222.81.45: 7209 addnode = 85.175.216.200: 7209 addnode = 85.214.148.216: 7209 addnode = 85.25.119.107: 7209 addnode = 87.118.118.88: 7209 addnode = 88.84.216.61: 7209 addnode = 88.99.199.93: 7209 Addnode = 94.130.74.135: 7209 addnode = 94.130.77.192: 7209

batch file settings:

    
    Setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100
    ccminer-x64 -a x11 -o http://127.0.0.1:41677 ​​-u 1 -px -i 21

[dejaba]

Hi

I have received the following error when attempting to open Artic wallet after attempting to setup the Artic Masternode.

Error reading goldminenode configuration file:Could not parse goldminenode.conf
Line:7
"articcoinmaster45.77.2.95:7209 6vxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'

Now I am unable to re-open wallet.