[ANN][AMS] AmsterdamCoin™ | 100% PoS, Cold-Staking, Side-Chains, Smart-Contracts

[cedlemercier]

AHHHR yobit .....
My AMS parts are in transfer cold storage since 2 days.
I make requests for support but no response from them.
I hope that YOBIT will respond, I have 1 masternode at them and it is blocked in cold storage.
Do you know the delay to unlock my AMS in Yobit?

[vinnieG]

Hi Dev,

Very nice work on the swap function, it worked for me without any problems. I also really like the new wallet. Keep up the good work!

I live in Amsterdam myself and really like this coin to work. I am now collecting enough coins to start my own maternode and support this project and its community.

One question for the dev, the new wallet says "staking is not active" even when my wallet is unlocked, any idea why this is? i have around 35k of coins in my new wallet.

Hi Vinnie,

Thanks for your support. Staking is not yet active. Please review the PoW and PoS breakdown on the OP.

Hi Kees,

Thanks for your reply, i see now that i have to wait some time for staking. In that case i will go for setting up a masternode to support this project. I have a windows 10 thin client 2GB DDR RAM and 40 GB harddrive at home. Will this be sufficient hardware to run a masternode?

[keesdewit]

Hi Dev,

Very nice work on the swap function, it worked for me without any problems. I also really like the new wallet. Keep up the good work!

I live in Amsterdam myself and really like this coin to work. I am now collecting enough coins to start my own maternode and support this project and its community.

One question for the dev, the new wallet says "staking is not active" even when my wallet is unlocked, any idea why this is? i have around 35k of coins in my new wallet.

Hi Vinnie,

Thanks for your support. Staking is not yet active. Please review the PoW and PoS breakdown on the OP.

Hi Kees,

Thanks for your reply, i see now that i have to wait some time for staking. In that case i will go for setting up a masternode to support this project. I have a windows 10 thin client 2GB DDR RAM and 40 GB harddrive at home. Will this be sufficient hardware to run a masternode?

Hi Vinnie,

I think that will do.

[cedlemercier]

Bjr DEV j'aimerai savoir si je peux laisser mes pièces sur novaexchange et le swap passera les changer? Je ne sais pas comment faire pour avoir la nouvelle agresse et aller changer avec les nouvelles. J'aimerai votre travail mais je suis novice et j'aime cette pièce.
 On me demande la nouvelle adresse  et ça je devrais l'avoir? Que me conseillée vous? Je n'aimerais pas perdre mes pièces s'il vous aidez moi

Salut,
ça fait plaisir de voir un gars de France ici.
Voici la réponse que tu attends:

1/ Tu télécharges le nouveau porte-feuille AMS et tu attends qu'il soit complètement synchronisé avec le réseau.
2/ Tu copie ton adresse de reception indiquée dans le porte-feuille.
3/ Tu te connecte sur la page de swap: https://swap.amsterdamcoin.com/
4/ Tu renseignes ton adresse de portefeuille (nouvelle adresse)
5/ La page te renverra une adresse à laquelle tu dois envoyé tes vieux AMS.
6/ après 6 confirmations, le swap se fait automatiuement et tu recois tes nouveaux AMS dans ton porte feuille.

A+

[blissz]

Hi,

How is it possible to run on the same IP multiple masternodes?

I am sorry, but its not possible for security reasons.

84.162.242.84:50020 - 6 masternodes.
How he managed to do this?

I've seen that as well. This is unwanted I think those 5 extra on the same IP doesn't add anything to the network.

Let me look. I think you have seen this in the old wallet? Pivx (our base) says that its not possible.

No it's on the new wallet (check the masternode list and you will see)

[kaltun]

Man i wanted to have fun with you guys too. Im stuck in cold storage. Hopefully one day i can get my coin and set up. Thanks for all your hard work. Fish

my wallet also stuck , but there were 3k in it so, no big harm for me ...

[blissz]

AHHHR yobit .....
My AMS parts are in transfer cold storage since 2 days.
I make requests for support but no response from them.
I hope that YOBIT will respond, I have 1 masternode at them and it is blocked in cold storage.
Do you know the delay to unlock my AMS in Yobit?

It does work if you do multiple smaller withdrawals.

[kaltun]

AHHHR yobit .....
My AMS parts are in transfer cold storage since 2 days.
I make requests for support but no response from them.
I hope that YOBIT will respond, I have 1 masternode at them and it is blocked in cold storage.
Do you know the delay to unlock my AMS in Yobit?

It does work if you do multiple smaller withdrawals.

i didnt have any problems with yobit, i even send it from yobit to the swap, perfectly  happened ..  so ive got new-AMS in my wallet

[busiru]

miner for linux?

[asleep]

AHHHR yobit .....
My AMS parts are in transfer cold storage since 2 days.
I make requests for support but no response from them.
I hope that YOBIT will respond, I have 1 masternode at them and it is blocked in cold storage.
Do you know the delay to unlock my AMS in Yobit?

It does work if you do multiple smaller withdrawals.

i didnt have any problems with yobit, i even send it from yobit to the swap, perfectly  happened ..  so ive got new-AMS in my wallet

Very bad for me too, I sent exactly 100k for masternode from yobit and got stuck on "Transfer from cold storage" status more than 12 hours now

[blissz]

miner for linux?

you have to compile it yourself, but this should do:
https://github.com/JayDDee/cpuminer-opt

[cedlemercier]

AHHHR yobit .....
My AMS parts are in transfer cold storage since 2 days.
I make requests for support but no response from them.
I hope that YOBIT will respond, I have 1 masternode at them and it is blocked in cold storage.
Do you know the delay to unlock my AMS in Yobit?

It does work if you do multiple smaller withdrawals.

i didnt have any problems with yobit, i even send it from yobit to the swap, perfectly  happened ..  so ive got new-AMS in my wallet

Very bad for me too, I sent exactly 100k for masternode from yobit and got stuck on "Transfer from cold storage" status more than 12 hours now

Yes I also regretted, I sent 105K, it is blocked in cold storage and no response from yobit for 48H.
I may be too impatient but no answer from YOBIT is not reassuring.

I will warn here if the situation is unblocked.

[kaltun]

need help 

trying to setup an masternode but i cant manage it

Masternode activation:

1. Create a new address -> Receive -> New Address
2. Send exactly 100000 AMS to your new address and write down the TX hash
3. Wait for 25 confirmations
4. Open Help -> Debug window -> Tab console
5. Type "masternode outputs" and write down the output
6. Type "masternode genkey"  and write down the output
7. Menu Masternodes -> Button Create
8. Alias: Name of the masternode (can be anything)
9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org)
10. PrivKey: The output of the "masternode genkey" command (step 6)
11. TxHash: The left hand side of the output of "masternode outputs" (step 5)
12. Output Index: The right hand side of the output of "masternode outputs" (step 5)

1: done
2: done
3: done
4. Open Help -> Debug window -> Tab console ?? there is no debug window in help.... so i used the debug window  in Tools tab
5: done
6: done
7. Menu Masternodes -> Button Create   no create button on MenuMastenode and i stuck

[Gareth73]

need help 

trying to setup an masternode but i cant manage it

Masternode activation:

1. Create a new address -> Receive -> New Address
2. Send exactly 100000 AMS to your new address and write down the TX hash
3. Wait for 25 confirmations
4. Open Help -> Debug window -> Tab console
5. Type "masternode outputs" and write down the output
6. Type "masternode genkey"  and write down the output
7. Menu Masternodes -> Button Create
8. Alias: Name of the masternode (can be anything)
9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org)
10. PrivKey: The output of the "masternode genkey" command (step 6)
11. TxHash: The left hand side of the output of "masternode outputs" (step 5)
12. Output Index: The right hand side of the output of "masternode outputs" (step 5)

1: done
2: done
3: done
4. Open Help -> Debug window -> Tab console ?? there is no debug window in help.... so i used the debug window  in Tools tab
5: done
6: done
7. Menu Masternodes -> Button Create   no create button on MenuMastenode and i stuck

4. Yes, Tools / Debug Window
7. Go to Settings / Options / Wallet and select Show Masternodes Tab

[kaltun]

need help  

trying to setup an masternode but i cant manage it

Masternode activation:

1. Create a new address -> Receive -> New Address
2. Send exactly 100000 AMS to your new address and write down the TX hash
3. Wait for 25 confirmations
4. Open Help -> Debug window -> Tab console
5. Type "masternode outputs" and write down the output
6. Type "masternode genkey"  and write down the output
7. Menu Masternodes -> Button Create
8. Alias: Name of the masternode (can be anything)
9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org)
10. PrivKey: The output of the "masternode genkey" command (step 6)
11. TxHash: The left hand side of the output of "masternode outputs" (step 5)
12. Output Index: The right hand side of the output of "masternode outputs" (step 5)

1: done
2: done
3: done
4. Open Help -> Debug window -> Tab console ?? there is no debug window in help.... so i used the debug window  in Tools tab
5: done
6: done
7. Menu Masternodes -> Button Create  no create button on MenuMastenode and i stuck

4. Yes, Tools / Debug Window
7. Go to Settings / Options / Wallet and select Show Masternodes Tab

it was showened... but i dont see the BUTTON CREATE ...



btw i send 100000.00005220 ( -0.00005220 for the fee ) or do i have sent 100000 incl the fee ??

[dvyanc]

What to do if have AMS on Exchange?

[keesdewit]

What to do if have AMS on Exchange?

Nothing, just wait for the exchange to swap.

[Gareth73]

need help  

trying to setup an masternode but i cant manage it

Masternode activation:

1. Create a new address -> Receive -> New Address
2. Send exactly 100000 AMS to your new address and write down the TX hash
3. Wait for 25 confirmations
4. Open Help -> Debug window -> Tab console
5. Type "masternode outputs" and write down the output
6. Type "masternode genkey"  and write down the output
7. Menu Masternodes -> Button Create
8. Alias: Name of the masternode (can be anything)
9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org)
10. PrivKey: The output of the "masternode genkey" command (step 6)
11. TxHash: The left hand side of the output of "masternode outputs" (step 5)
12. Output Index: The right hand side of the output of "masternode outputs" (step 5)

1: done
2: done
3: done
4. Open Help -> Debug window -> Tab console ?? there is no debug window in help.... so i used the debug window  in Tools tab
5: done
6: done
7. Menu Masternodes -> Button Create  no create button on MenuMastenode and i stuck

4. Yes, Tools / Debug Window
7. Go to Settings / Options / Wallet and select Show Masternodes Tab

it was showened... but i dont see the BUTTON CREATE ...

btw i send 100000.00005220 ( -0.00005220 for the fee ) or do i have sent 100000 incl the fee ??

Try this:

Go to Tools and Open Wallet Configuration File.

My Configuration File looks like this:

rpcallowip=127.0.0.1
externalip=
rpcuser=
rpcpassword=
server=1
listen=1
port=50020
masternode=1
masternodeaddr=
masternodeprivkey=
staking=0

Enter your external IP, rpcuser and rpc password, masternode address is your internal IP:50020

Save the file and close the wallet, then reopen the wallet and then in the console type masternode start

[igoreha311]

need help  

trying to setup an masternode but i cant manage it

Masternode activation:

1. Create a new address -> Receive -> New Address
2. Send exactly 100000 AMS to your new address and write down the TX hash
3. Wait for 25 confirmations
4. Open Help -> Debug window -> Tab console
5. Type "masternode outputs" and write down the output
6. Type "masternode genkey"  and write down the output
7. Menu Masternodes -> Button Create
8. Alias: Name of the masternode (can be anything)
9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org)
10. PrivKey: The output of the "masternode genkey" command (step 6)
11. TxHash: The left hand side of the output of "masternode outputs" (step 5)
12. Output Index: The right hand side of the output of "masternode outputs" (step 5)

1: done
2: done
3: done
4. Open Help -> Debug window -> Tab console ?? there is no debug window in help.... so i used the debug window  in Tools tab
5: done
6: done
7. Menu Masternodes -> Button Create  no create button on MenuMastenode and i stuck

4. Yes, Tools / Debug Window
7. Go to Settings / Options / Wallet and select Show Masternodes Tab

it was showened... but i dont see the BUTTON CREATE ...


http://i63.tinypic.com/2qd5z5z.jpg

btw i send 100000.00005220 ( -0.00005220 for the fee ) or do i have sent 100000 incl the fee ??

Put settings in masternode.conf - https://bitcointalk.org/index.php?topic=1152947.msg20755699#msg20755699
and restart wallet

send only 100k in debug window (see my example)

that's my transaction:
Status: 517 confirmations
Date: 8/10/2017 11:28
Total debit: -100 000.00000000 AMS
Total credit: 100 000.00000000 AMS
Transaction fee: -0.00002260 AMS
Net amount: -0.00002260 AMS
Transaction ID: 3333333333333333333333333333333333333333333333333333333333333333
Output index: 0

[Pezso]

Man i wanted to have fun with you guys too. Im stuck in cold storage. Hopefully one day i can get my coin and set up. Thanks for all your hard work. Fish