notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 02, 2015, 10:19:37 PM |
|
is there going to be a batch 4?
they are most likely fixing to either introduce lite or drop the price to be competitive with others in December and especially by January. I would be hugely surprised if they keep both the premium and the model. Since they didn't use the model number ~ S6 ~ ... maybe that's what the 3.xTH/s "S7 lite" will be ..... With how cut throat the bitcoin hardware market is.... the absolute addiction to getting the best efficency, supply and demand ( no more S7's at 4.86TH/s )... I'd have to say that the 3.x TH/s S7 lite will be the same price as the S7 B3. WHY NOT? Only game in town, till someone else comes along and creates some competition.... then and only then will there be lower price models. bitmaintech can self mine at the high coin prices which are touching 360 usd. I see them waiting a while before batch 4 and I see them selling a 2 board unit at a price rise per gh . if the 4860gh batch 3 was 1620 usd that was 33 cents a gh. I can see a 3200gh batch 4 sell for 1200 usd which is 37.5 cents a gh If coins keep rising it would sell. Sell well. Only problem is if they jack up price with coins so high right now. I'm hoping they don't do to much of this. Assuming leak is true on new lower specced one will be interesting. I wonder if they went to 2 blades if so they should be able to sell for a decent amount less, guess it depends partially on how much more chips they put on hashing board assuming they do that.
|
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 02, 2015, 11:07:34 PM |
|
Replacement fan got here already. Like a rocket. Excellent service from Yoshi
|
For those about to block we salute you! AC->BTC
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8458
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 02, 2015, 11:09:05 PM |
|
is there going to be a batch 4?
they are most likely fixing to either introduce lite or drop the price to be competitive with others in December and especially by January. I would be hugely surprised if they keep both the premium and the model. Since they didn't use the model number ~ S6 ~ ... maybe that's what the 3.xTH/s "S7 lite" will be ..... With how cut throat the bitcoin hardware market is.... the absolute addiction to getting the best efficency, supply and demand ( no more S7's at 4.86TH/s )... I'd have to say that the 3.x TH/s S7 lite will be the same price as the S7 B3. WHY NOT? Only game in town, till someone else comes along and creates some competition.... then and only then will there be lower price models. bitmaintech can self mine at the high coin prices which are touching 360 usd. I see them waiting a while before batch 4 and I see them selling a 2 board unit at a price rise per gh . if the 4860gh batch 3 was 1620 usd that was 33 cents a gh. I can see a 3200gh batch 4 sell for 1200 usd which is 37.5 cents a gh If coins keep rising it would sell. Sell well. Only problem is if they jack up price with coins so high right now. I'm hoping they don't do to much of this. Assuming leak is true on new lower specced one will be interesting. I wonder if they went to 2 blades if so they should be able to sell for a decent amount less, guess it depends partially on how much more chips they put on hashing board assuming they do that. I would pay them 1200 usd for a two board that does 3200gh as long as btc stays up and keeps ahead of diff. right now since sept 4 price is 231 - 371 on coin base that is about 60.6% and diff since sept 4 is up about 16%
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 02, 2015, 11:15:37 PM |
|
I bet there would be demand for even a single board version. Right now "home" miners are desperate for new gear that is both affordable and efficient. Anything over $1000 I do not consider affordable for a home miner (never mind how fast the S7 sold at full retail+ pricing...), that's a serious expenditure, but a single board for a couple hundred bucks that is close to 1TH would be pretty freaking sweet. And it should be able to run cool enough that the fan requirements wouldn't necessitate running the thing in a sound proof enclosure.
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 02, 2015, 11:31:12 PM |
|
any updates on delivery ? i dont think there will be any "new" models of miners till delivery is up to schedule ? ordered on 25th last mth, nth yet for me.
Towards the end of this week for oct17 and oct21 I ordered 10/25 batch 3. Shipped out 10/30, set for arrival tomorrow. did you receive an email from bmt informing you that it has shipped or how did you know ? grrr, guess i just gotta be a little more patient.
|
|
|
|
cryptichermit
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 106
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 02, 2015, 11:47:24 PM |
|
any updates on delivery ? i dont think there will be any "new" models of miners till delivery is up to schedule ? ordered on 25th last mth, nth yet for me.
Towards the end of this week for oct17 and oct21 I ordered 10/25 batch 3. Shipped out 10/30, set for arrival tomorrow. did you receive an email from bmt informing you that it has shipped or how did you know ? grrr, guess i just gotta be a little more patient. Yes on this batch 3, I did receive an email and update on the bitmain website with tracking number.
|
|
|
|
fubly
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 02, 2015, 11:48:44 PM |
|
someone here who is thinking about mineral oil cooling, like this: or is this cheaper? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi.imgur.com%2FlW9YLko.gif%26t%3D558%26c%3De9yOmqfT_N9ONg&t=665&c=eDf55AIb1k1KXQ)
|
each time you send a transaction don't forget to use a new address, each time you receive one also!
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 12:22:07 AM |
|
Replacement fan got here already. Like a rocket. Excellent service from Yoshi
I waited for my DOA arrived S5+ miner FAN from China only 1,5 months ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) But I have received during this time several repaired S5+ blades. Also Excellent service from Sherry Liu . Tomorrow comes six orders from Bitmaintech. From last orders I payd taxes 3330 EURO and 58 sents. ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) Tomorrow I have to pay only about 1200 EURO ![Kiss](https://bitcointalk.org/Smileys/default/kiss.gif)
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 12:40:27 AM |
|
someone here who is thinking about mineral oil cooling, like this: (immersion)
or is this cheaper? (fan)
Fan's are by far cheaper. That is why almost every miner is one with fan's. There are a few water cooled miners, but very few. Half have been modded to get water cooling. It's been a while since I've seen a mod even using immersion.
|
|
|
|
cdjbolton
Newbie
Offline
Activity: 54
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 02:09:29 AM |
|
So I have decided to overclock one of my machines, Just to see, and well I would like some feedback, Temps are good, the error rate is good but what are peoples thoughts on the maximum safe frequency. Or do people think this is already too far, Im not going to run this for long but would like to test for 24 hours with this machine, My ambient temps are low (8c-14c) and im using 2x EVGA 1300w gold PSUs on this one machine. http://i63.tinypic.com/n3an43.png
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8458
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 02:25:10 AM |
|
So I have decided to overclock one of my machines, Just to see, and well I would like some feedback, Temps are good, the error rate is good but what are peoples thoughts on the maximum safe frequency. Or do people think this is already too far, Im not going to run this for long but would like to test for 24 hours with this machine, My ambient temps are low (8c-14c) and im using 2x EVGA 1300w gold PSUs on this one machine. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fhttom%2Fn3an43.png&t=665&c=uxgygvcIoXxgUg) post a screen shot after 1 hour run time post a screen shot after 3 hours run time then I will give an opinion. for now you have a 7 minute screen shot which is too short to make a guess on my part. hint if your temps stay under 50 and your errors under 0.0050% you are in good shape
|
|
|
|
adaseb
Legendary
Offline
Activity: 3850
Merit: 1731
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 02:47:08 AM |
|
That is consistent with my experience. I have had many new cables/connectors under high loads that stay nice and cool, but a few months later they start getting hot. I have also noticed variance even between samples of high quality cables. After many negative experiences with KncMiner Neptunes that only have one PCIe, I plan to use all three on my S7s for backup and redundancy. Burning my house down to save a few $'s on cables is not worth it for me.
Today I got the smell of smoke from my Corsair CX750M It was connected with one S7 board and S7 controller. Were all the PSUs connected to the same wall? Ground needs to be the same.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 02:57:06 AM |
|
That is consistent with my experience. I have had many new cables/connectors under high loads that stay nice and cool, but a few months later they start getting hot. I have also noticed variance even between samples of high quality cables. After many negative experiences with KncMiner Neptunes that only have one PCIe, I plan to use all three on my S7s for backup and redundancy. Burning my house down to save a few $'s on cables is not worth it for me.
Today I got the smell of smoke from my Corsair CX750M It was connected with one S7 board and S7 controller. Were all the PSUs connected to the same wall? Ground needs to be the same. My advice is to unplug it if you smell smoke. I would inspect the miner to see where it's coming from for sure. See if PSU if inside it or more likely a PCIe cord. Upgrade PSU I highly suggest. You can use PSU's for multiple generations of miners they will pay off. Also if you downsize the nicer PSU's hold better value then lower quality.
|
|
|
|
bbOOmm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 03:09:52 AM |
|
someone here who is thinking about mineral oil cooling, like this: (immersion)
or is this cheaper? (fan)
Fan's are by far cheaper. That is why almost every miner is one with fan's. There are a few water cooled miners, but very few. Half have been modded to get water cooling. It's been a while since I've seen a mod even using immersion. I'm thinking of doing just that .... mineral oil immersion cooling and see just how far I can push some miners. Not the S7's though. I'm not messing with the S7's till the warentee is up, THEN ... I'll mess around with them sandwiching the hash boards between two slabs of aluminum heatsink extrusion instead of using the little stock sticky heatsinks among other things. With winter coming, using a mineral oil immersion cooling system, I can easily extract the heat for the house, then send the mineral oil loop outside for good ol Mother Nature refrigeration and chill the chips, boards, wiring, connectors ... everything. Every part of the miner gets in contact with the cooling medium - the mineral oil ( IE Transformer oil ). I've been wanting to do this since the Block Errupter Cubes came out but technology was changing and improving so fast that by the time I'd plan how to do it, the miners would be obsolete. Now that the technology advancement is slowing a bit, I think I can play with mineral oil cooling. Now if you REALLY wanna get serious, just start imagining what you could do if you had a couple piping loops that went into the earth like a geo-thermal cooling system, except using the earth's natural 50-55 degree F. ground temp to chill the mineral oil any time of the year.
|
|
|
|
Liquid71
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 05:08:54 AM |
|
Hello
Have a question.
What should I consider when chosing a mining pool?. I have a S7 B2 on its way to my house. It should be delivered on thursday and this is my first miner.
I have been reading about the different methods each pool work (PPS, PPLNS, DGM, SMPPS, etc...) and also we can find several pools on each method. Which method and which pool do you think work better and why? If two given pools work on PPS for example, how is that possible that one of them could have their luck on "-8%" (just saying something), I thought statiscally both of them should be "the same thing" (of course according to their each mining total power)
Do they have any trick I should take care of?
Is there anyway to measure efficiency of each mining pool without having to test each pool for several hours or days?
Thank you
Luck is just a laymans term for variance. If you mine on a pool having bad "luck" you'll earn the same BTC in the long run as a pool having good "luck". The luck on a pool just shows how fast or slow it has recently been finding blocks. Over time a pool will find the same amount of blocks to match it's hashrate, so a bigger pool doesn't earn more. A pool with 1% of the total hashrate will find 1% of blocks over time, and the payouts will be spread out over less miners than a big pool so they will earn the same over time regardless of current luck. A 1% pool can go long periods of time with bad luck, which you might not be comfortable with I was just using it as an example. PPS method has no luck factor, the pool might just be displaying the luck even though it doesn't have any effect on payouts. PPS usually has higher fees, so it's a personal preference, personally I avoid it since I'll make the same amount with the other payout methods just with more variance. http://eligius.st/~gateway/ is my personal favorite, it's as close to pps as possible with zero fees. It does have long round times due to being a smaller pool at the moment, but during good luck your old shares from bad luck are paid. It also pays out in MINED coins, not the pool sending you BTC. So the coins show up in your wallet as mined, it's still just BTC just kind of cool. And being a smaller pool you're helping keep the blockchain decentralized which is good for bitcoin. If you need/want more steady payouts daily obviously you will need to go on a bigger pool, if it's one of the bigger pools I would just choose the one with the lowest fee and not worry too much about luck. Slush pool is also a good pool, I have never mined f2pool or antpool.
|
|
|
|
PPOC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 05:49:22 AM |
|
Hello
Have a question.
What should I consider when chosing a mining pool?. I have a S7 B2 on its way to my house. It should be delivered on thursday and this is my first miner.
I have been reading about the different methods each pool work (PPS, PPLNS, DGM, SMPPS, etc...) and also we can find several pools on each method. Which method and which pool do you think work better and why? If two given pools work on PPS for example, how is that possible that one of them could have their luck on "-8%" (just saying something), I thought statiscally both of them should be "the same thing" (of course according to their each mining total power)
Do they have any trick I should take care of?
Is there anyway to measure efficiency of each mining pool without having to test each pool for several hours or days?
Thank you
Luck is just a laymans term for variance. If you mine on a pool having bad "luck" you'll earn the same BTC in the long run as a pool having good "luck". The luck on a pool just shows how fast or slow it has recently been finding blocks. Over time a pool will find the same amount of blocks to match it's hashrate, so a bigger pool doesn't earn more. A pool with 1% of the total hashrate will find 1% of blocks over time, and the payouts will be spread out over less miners than a big pool so they will earn the same over time regardless of current luck. A 1% pool can go long periods of time with bad luck, which you might not be comfortable with I was just using it as an example. PPS method has no luck factor, the pool might just be displaying the luck even though it doesn't have any effect on payouts. PPS usually has higher fees, so it's a personal preference, personally I avoid it since I'll make the same amount with the other payout methods just with more variance. http://eligius.st/~gateway/ is my personal favorite, it's as close to pps as possible with zero fees. It does have long round times due to being a smaller pool at the moment, but during good luck your old shares from bad luck are paid. It also pays out in MINED coins, not the pool sending you BTC. So the coins show up in your wallet as mined, it's still just BTC just kind of cool. And being a smaller pool you're helping keep the blockchain decentralized which is good for bitcoin. If you need/want more steady payouts daily obviously you will need to go on a bigger pool, if it's one of the bigger pools I would just choose the one with the lowest fee and not worry too much about luck. Slush pool is also a good pool, I have never mined f2pool or antpool. One thing I would add is if you are very depended on ROI for hardware, or power costs then a smaller pool with higher variance can pay less. Because of large diff increases, like we are seeing now the more block you are part of in the diff window the better. If you get paid on 350 blocks in the 12 or so days at current diff vs getting paid for 5 in the diff window. That is even more important on a PPS pool since your paid based on network diff.
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
sunbreak
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 107
Merit: 30
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 09:06:23 AM |
|
The last quote I got from Great North Data was $60/KW but you had to have a minimum requirement of 30KW in equipment. I wanted to send 20 S5s to them but that was only 11-12KW and they would not take it.
Hi, I'm based in Canada too and I do hosting. My rates are (Taxes included) 74.73 CAD which is currently ~ 57 USD / kW. I don't have any minimum and I'm currently working on a new website where customers will be able to manage their miners. There is no minimum needed.. (Why would there be...??) My website is currently http://cryptominer.ca . Just PM/send me an email if you are interested. Well there you go guys! It soulds like a pretty good possibility for a host site... EDIT: I am having a bit of an issue reaching the http://cryptominer.ca website...EDIT 2: I did finally get past the certificate issue...Just wanted to mention that I also provide miner hosting through my company, JeffColo. I am located near Portland, OR and have very competitive rates, with no taxes and no import fees or duties. The one downside I have had is that I'm typically full with no remaining vacancy. Recently though there have been a fair number of customers who have been selling off old gear and I do have some room opening up shortly. However only about 30-40kW, I do have an expansion underway that will add another 500kW but it won't likely be available until late December/early January. In addition to mining gear I also host traditional servers at the same rates I offer miners in terms of power usage. So if you want a dedicated management server or something thats no problem. I also have a VPS setup and I can provide you with a management/logging/proxy VM if you need. I have all the standard stuff; * Insured against theft and disaster * Multi-homed (1 Gbps fiber / 100 Mbit cable / 30 Mbps 4G LTE) * Redundant network core and routing * Critical infrastructure and virtualization on UPS I do not have a website, no need or time. If you want more details email me at jeff at jeffcolo.net
|
|
|
|
BITMAIN (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 09:43:09 AM |
|
Antminer S7 Batch 4 and Batch 5 will open sale later tonight with limited quantity, at 8:00pm of Beijing time ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Place order in our website directly: https://bitmaintech.com/product.htm
|
Cloud Mining? Just Go to Hashnest.com Best Liquidity Lowest Price 100% Real Mining Back Up
|
|
|
adaseb
Legendary
Offline
Activity: 3850
Merit: 1731
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 09:57:23 AM |
|
Antminer S7 Batch 4 and Batch 5 will open sale later tonight with limited quantity, at 8:00pm of Beijing time ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Place order in our website directly: https://bitmaintech.com/product.htm What will be the price for those batches?
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2015, 10:07:31 AM |
|
Antminer S7 Batch 4 and Batch 5 will open sale later tonight with limited quantity, at 8:00pm of Beijing time ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Place order in our website directly: https://bitmaintech.com/product.htm good to hear that new batches are coming up, but my order that was PAID, CONFIRMED & placed has no movement at all ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Order Details ORDER ID: 0012015102500012 DATE: 2015-10-25 10:44:32 I hope BMT can improve the S&H + on time Delivery. better not jump the gun yet ... something wasn't announced ........................................... PRICE & when is it going to be delivered ?
|
|
|
|
|