Sidehack stick solo pool club

[notlist3d]

Ive been doing some testing today. Should have 2 pointed twords mine during it.

If anyone want's to watch 2 should be at: http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.notlist3dstick  .  They are not being pushed very hard just trying to get it all to work on RPI.

[1714100050]

1714100050

[1714100050]

1714100050

[1714100050]

1714100050

[notlist3d]

Any help would be greatly appreciated. Windows 8.1 system, ONE miner directly into a laptop USB, I've tried every version of mining program and .bat file I can think of, and read Novak's GekkoScience Compac BM1384 Stickminer Official Support Thread repeatedly to no avail.

not all laptop USB ports can put out the full 500 ma (2.5 watts) that the USB 2 spec calls for.

have you tried them in a desktop or (standard run of the mill) powered USB 2 hub?

this may not be an issue now but cgminer used to have problems with some USB 3 ports with some miners, if your laptop has both USB 2 and 3 try a USB 2 port.

Also if you are use to a little of linux, it's honestly a heck of a lot easier then windows.   The zadig driver is just a heck of a pain.    I had a lot better luck with Debian.

But these are both pre-production sticks i'm using so might have changed.   I'm should get my production stick soon.

[philipma1957]

Any help would be greatly appreciated. Windows 8.1 system, ONE miner directly into a laptop USB, I've tried every version of mining program and .bat file I can think of, and read Novak's GekkoScience Compac BM1384 Stickminer Official Support Thread repeatedly to no avail.

not all laptop USB ports can put out the full 500 ma (2.5 watts) that the USB 2 spec calls for.

have you tried them in a desktop or (standard run of the mill) powered USB 2 hub?

this may not be an issue now but cgminer used to have problems with some USB 3 ports with some miners, if your laptop has both USB 2 and 3 try a USB 2 port.

Also if you are use to a little of linux, it's honestly a heck of a lot easier then windows.   The zadig driver is just a heck of a pain.    I had a lot better luck with Debian.

But these are both pre-production sticks i'm using so might have changed.   I'm should get my production stick soon.

yours are fine so far.  Now I run 3 setups I have 7  sticks running on my macmini vmware fusion shell  windows 7 is inside of the shell  pretty stable but due to this os being an old build with a shit ton of stuff on the os drive..  my vmware fusion shell is not allowing for a bat file  simply tells me f you.  So on the fusion build it is only allowing me to start by clicking on cgminer.

I know this has something to do with the vm shell .  but I just have not fixed it yet.


note the sticks dropping but this is all due to lagtime in the shell

[philipma1957]

Now this is my next build 2 sticks with a heavy over clock.

I have to photo it so give me a few minutes

[TheRealSteve]

Haven't used freenode before, but that looks really cool!

It's one of the few IRC networks remaining - there's quite a few software and hardware projects on there, including the 'official' bitcoin channels.  If you don't have an IRC client, there's also a webchat - though I do recommend using a client

[edonkey]

Haven't used freenode before, but that looks really cool!

It's one of the few IRC networks remaining - there's quite a few software and hardware projects on there, including the 'official' bitcoin channels.  If you don't have an IRC client, there's also a webchat - though I do recommend using a client

Thanks! I'll have to look into getting a Mac client.

[edonkey]

I finally got that CK pool notification script posted on github:

http://edonkeycoin.github.io/ckpoolnotify/

Currently all the script does is email you when a worker or user address has a new best share that's better than the previous one. While past success is no indication of future success, this does provide a little bit of feedback that something is happening. And it's kind of fun to cheer on your sticks.

In the future more useful notifications can be added, like hash rate warnings, found block alerts, etc.

The details are in the read me, but here's the overview of how you set up and use the script:

• Install a couple of needed python libraries
• Send a test message to validate your email credentials
• Run the script with your email settings plus the worker and user addresses you want to monitor
• Optionally configure as a daemon to run automatically at boot

Honestly I've only tested this on Mac OS X (Yosemite and the El Capitan GM). It probably works on Windows and Linux, but I haven't tried it. If you run into problems let me know.

[Ecnad]

The pool I was pointing my stick at said it would take 14months to reach the minimum payout, so redirected it to the pool club for lotto chance lol.

[edonkey]

The pool I was pointing my stick at said it would take 14months to reach the minimum payout, so redirected it to the pool club for lotto chance lol.

Good plan. Better odds.

FYI, you can look at this URL to see how the club is doing as far as its collective hash rate and best share:

http://solo.ckpool.org/users/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX

[VirosaGITS]

The pool I was pointing my stick at said it would take 14months to reach the minimum payout, so redirected it to the pool club for lotto chance lol.

Good plan. Better odds.

FYI, you can look at this URL to see how the club is doing as far as its collective hash rate and best share:

http://solo.ckpool.org/users/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX

200m quite a way off still.

And yes, mining for dust with 8GH seem a bit pointless. Unless you have a big setup with tons of stick, better off using it as a lotto ticket imo. Thats why i bought a single one, anyways.

[edonkey]

I finally got that CK pool notification script posted on github:

http://edonkeycoin.github.io/ckpoolnotify/

Currently all the script does is email you when a worker or user address has a new best share that's better than the previous one. While past success is no indication of future success, this does provide a little bit of feedback that something is happening. And it's kind of fun to cheer on your sticks.

FYI, I've updated the script to notify when the CK solo pool has found a new block.

If the found block is one of your monitored addresses, the script congratulates you. Otherwise it wishes you better luck next time

[philipma1957]

The pool I was pointing my stick at said it would take 14months to reach the minimum payout, so redirected it to the pool club for lotto chance lol.

what address did you use?


http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Ecnadstick

shows not in use.


To club members I just rented 0.011 at 5th  order   #628092






 

[Ecnad]

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnad1

[philipma1957]

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnad1

okay I will put it here


https://bitcointalk.org/index.php?topic=1177508.0

would help if it was .ecnadstick 

 but your name for it  does work

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnad1

shows about 28gh

[Mikestang]

Bookmarking this thread, I'll be pointing one of my sticks here as soon as they show up.  Looks like almost 400GH going, it's like an S3, not too shabby!

[Ecnad]

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnad1

okay I will put it here


https://bitcointalk.org/index.php?topic=1177508.0

would help if it was .ecnadstick 

 but your name for it  does work

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnad1

shows about 28gh

I can change it if you want

[philipma1957]

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnad1

okay I will put it here


https://bitcointalk.org/index.php?topic=1177508.0

would help if it was .ecnadstick 

 but your name for it  does work

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnad1

shows about 28gh

I can change it if you want

thanks it would keep it consistent if you do the change.

[Ecnad]

k, done.

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Ecnadstick

[philipma1957]

k, done.

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Ecnadstick

thank you I will move it up to top thread.

[philipma1957]

Just started the .011 btc at 5th  should last for 5-7 hours

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.philipma1957donation


https://www.nicehash.com/?p=orders


order # 629921