[TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH

[pokeytex]

Hello - what is a good sample transfer.conf to get sync going?

Also, on OP - transfer.conf is not spelled correct.

I think there's already one .conf in roaming/.transfer

I get no connections though?

[1715464616]

1715464616

[1715464616]

1715464616

[1715464616]

1715464616

[1715464616]

1715464616

[antho281]

Do NOT even get me started on AmberCoin right now lol..........

As for the current block reward it is currently just 0.5 TX/block on PoS.

Concerning the Lotto, maybe not having a masternode as a requirement because not everyone is technically or logistically able to setup a masternode, but at least 10,000 TX to buy tickets or possibly no TX min requirement to include everyone.

Not everyone can afford 0.3 BTC (at current TX prices) at the drop of a hat (lookin out for all my poor peeps since I was one when I first started crypto). Maybe a middle ground of 5000 TX held or even 1000.

In fact as wigitgetit said "This is a Community Effort" Therefore why not set up a poll to see if there should be:

1) No Min TX Limit

2) 1000 TX Min

3 5000 TX Min

4) 10000 TX Min

That's a fact I didn't thought about, 1 000 coins could make people stay after the lotto

[antho281]

Hello - what is a good sample transfer.conf to get sync going?

Also, on OP - transfer.conf is not spelled correct.

I think there's already one .conf in roaming/.transfer

I get no connections though?

You can wait a few minutes or add node manually from the console
Try 70.83.227.32:17170 and 70.83.227.32:17172
Function : addnode 70.83.227.32:17170 add
If it still don't work, let me know and I'll give you a full list !

[WigitGetIt]

Hello - what is a good sample transfer.conf to get sync going?

Also, on OP - transfer.conf is not spelled correct.

I think there's already one .conf in roaming/.transfer

I get no connections though?

You can wait a few minutes or add node manually from the console
Try 70.83.227.32:17170 and 70.83.227.32:17172
Function : addnode 70.83.227.32:17170 add
If it still don't work, let me know and I'll give you a full list !

addnode=104.131.2.154
addnode=104.40.62.98
addnode=108.61.189.244
addnode=110.22.117.42
addnode=115.64.230.105
addnode=120.146.238.104
addnode=146.255.175.131
addnode=155.207.34.49
addnode=158.69.194.255
addnode=159.203.214.231
addnode=159.203.8.81
addnode=162.216.46.90
addnode=176.37.23.74
addnode=185.65.135.227
addnode=188.175.112.188
addnode=198.50.243.89
addnode=213.108.119.84
addnode=32.214.108.194
addnode=37.38.18.189
addnode=45.55.47.231
addnode=46.188.4.74
addnode=5.54.27.220
addnode=5.9.20.83
addnode=5.9.36.211
addnode=5.9.67.48
addnode=50.142.176.73
addnode=50.142.213.254
addnode=50.173.35.180
addnode=58.107.188.213
addnode=62.141.46.226
addnode=67.242.48.182
addnode=70.123.150.214
addnode=70.67.68.56
addnode=70.83.227.32
addnode=71.211.87.114
addnode=71.75.9.254
addnode=79.109.251.218
addnode=82.23.56.167
addnode=83.157.62.179
addnode=85.214.44.16
addnode=90.61.64.177
addnode=91.97.187.223
addnode=91.97.9.88
addnode=94.29.183.210
addnode=97.82.153.12
addnode=99.236.215.227

[pokeytex]

Hello - what is a good sample transfer.conf to get sync going?

Also, on OP - transfer.conf is not spelled correct.

I think there's already one .conf in roaming/.transfer

I get no connections though?

You can wait a few minutes or add node manually from the console
Try 70.83.227.32:17170 and 70.83.227.32:17172
Function : addnode 70.83.227.32:17170 add
If it still don't work, let me know and I'll give you a full list !

addnode=104.131.2.154
addnode=104.40.62.98
addnode=108.61.189.244
addnode=110.22.117.42
addnode=115.64.230.105
addnode=120.146.238.104
addnode=146.255.175.131
addnode=155.207.34.49
addnode=158.69.194.255
addnode=159.203.214.231
addnode=159.203.8.81
addnode=162.216.46.90
addnode=176.37.23.74
addnode=185.65.135.227
addnode=188.175.112.188
addnode=198.50.243.89
addnode=213.108.119.84
addnode=32.214.108.194
addnode=37.38.18.189
addnode=45.55.47.231
addnode=46.188.4.74
addnode=5.54.27.220
addnode=5.9.20.83
addnode=5.9.36.211
addnode=5.9.67.48
addnode=50.142.176.73
addnode=50.142.213.254
addnode=50.173.35.180
addnode=58.107.188.213
addnode=62.141.46.226
addnode=67.242.48.182
addnode=70.123.150.214
addnode=70.67.68.56
addnode=70.83.227.32
addnode=71.211.87.114
addnode=71.75.9.254
addnode=79.109.251.218
addnode=82.23.56.167
addnode=83.157.62.179
addnode=85.214.44.16
addnode=90.61.64.177
addnode=91.97.187.223
addnode=91.97.9.88
addnode=94.29.183.210
addnode=97.82.153.12
addnode=99.236.215.227

WOW! Now that's a list! LOL - thank you

[WigitGetIt]

Hello - what is a good sample transfer.conf to get sync going?

Also, on OP - transfer.conf is not spelled correct.

I think there's already one .conf in roaming/.transfer

I get no connections though?

You can wait a few minutes or add node manually from the console
Try 70.83.227.32:17170 and 70.83.227.32:17172
Function : addnode 70.83.227.32:17170 add
If it still don't work, let me know and I'll give you a full list !

revoed for clean up.

WOW! Now that's a list! LOL - thank you

Wanted to make sure you get connected. LOL

[pokeytex]

Hello - what is a good sample transfer.conf to get sync going?

Also, on OP - transfer.conf is not spelled correct.

I think there's already one .conf in roaming/.transfer

I get no connections though?

You can wait a few minutes or add node manually from the console
Try 70.83.227.32:17170 and 70.83.227.32:17172
Function : addnode 70.83.227.32:17170 add
If it still don't work, let me know and I'll give you a full list !

revoed for clean up.

WOW! Now that's a list! LOL - thank you

Wanted to make sure you get connected. LOL

Ty - toggling between (4) and (5) connections now - Bout 10 weeks left...

[WigitGetIt]

Hello - what is a good sample transfer.conf to get sync going?

Also, on OP - transfer.conf is not spelled correct.

I think there's already one .conf in roaming/.transfer

I get no connections though?

You can wait a few minutes or add node manually from the console
Try 70.83.227.32:17170 and 70.83.227.32:17172
Function : addnode 70.83.227.32:17170 add
If it still don't work, let me know and I'll give you a full list !

revoed for clean up.

WOW! Now that's a list! LOL - thank you

Wanted to make sure you get connected. LOL

Ty - toggling between (4) and (5) connections now - Bout 10 weeks left...

In your transfer.conf file add the below line and then restart the wallet. This will speed it up. That code will be updated in the next release.

maxorphanblocks=5000

[pokeytex]

Hello - what is a good sample transfer.conf to get sync going?

Also, on OP - transfer.conf is not spelled correct.

I think there's already one .conf in roaming/.transfer

I get no connections though?

You can wait a few minutes or add node manually from the console
Try 70.83.227.32:17170 and 70.83.227.32:17172
Function : addnode 70.83.227.32:17170 add
If it still don't work, let me know and I'll give you a full list !

revoed for clean up.

WOW! Now that's a list! LOL - thank you

Wanted to make sure you get connected. LOL

Ty - toggling between (4) and (5) connections now - Bout 10 weeks left...

In your transfer.conf file add the below line and then restart the wallet. This will speed it up. That code will be updated in the next release.

maxorphanblocks=5000

Ah - good fix - connections are going up and blocks are coming down!  Ty again.

[pokeytex]

Ok - so how many connections should my wallet have?  What is the best - masternode - guide to use?

[antho281]

Here we go : https://bitcointalk.org/index.php?topic=1150229.msg12161099#msg12161099
PS: you don't need to set stacking=0 anymore

[WigitGetIt]

Here we go : https://bitcointalk.org/index.php?topic=1150229.msg12161099#msg12161099
PS: you don't need to set stacking=0 anymore

or use this one. You need 10k TX for a masternode. The one below is latest.  I'll get the directions centralized.

https://bitcointalk.org/index.php?topic=1203975.msg13579307#msg13579307

But you still don't need staking=0 anymore.

[pokeytex]

Here we go : https://bitcointalk.org/index.php?topic=1150229.msg12161099#msg12161099
PS: you don't need to set stacking=0 anymore

or use this one. You need 10k TX for a masternode. The one below is latest.  I'll get the directions centralized.

https://bitcointalk.org/index.php?topic=1203975.msg13579307#msg13579307

But you still don't need staking=0 anymore.

Ok - now for multiple masternodes on the same wallet I need to follow this? https://dashpay.atlassian.net/wiki/pages/viewpage.action?pageId=1867877

[WigitGetIt]

Here we go : https://bitcointalk.org/index.php?topic=1150229.msg12161099#msg12161099
PS: you don't need to set stacking=0 anymore

or use this one. You need 10k TX for a masternode. The one below is latest.  I'll get the directions centralized.

https://bitcointalk.org/index.php?topic=1203975.msg13579307#msg13579307

But you still don't need staking=0 anymore.

Ok - now for multiple masternodes on the same wallet I need to follow this? https://dashpay.atlassian.net/wiki/pages/viewpage.action?pageId=1867877

That is a good guide. The next update will have it where you can make multiple masternodes through a gui. Infernoman is working on it right now in IRC.

[pokeytex]

Here we go : https://bitcointalk.org/index.php?topic=1150229.msg12161099#msg12161099
PS: you don't need to set stacking=0 anymore

or use this one. You need 10k TX for a masternode. The one below is latest.  I'll get the directions centralized.

https://bitcointalk.org/index.php?topic=1203975.msg13579307#msg13579307

But you still don't need staking=0 anymore.

Ok - now for multiple masternodes on the same wallet I need to follow this? https://dashpay.atlassian.net/wiki/pages/viewpage.action?pageId=1867877

That is a good guide. The next update will have it where you can make multiple masternodes through a gui. Infernoman is working on it right now in IRC.

Ok - first try was a failure - Does anyone have a good - step by step - guide to setting up multiple nodes on one wallet?  - Thanks -pokeytex

[antho281]

Join us on IRC or contact me directly in private 😊
I'm still up for a few hours

[avitas]

Yeah! Welcome in

Looks more promising than AmberCoin at the moment!! Still sorry for what happenned

Ty - I am trying to get back on my feet which is how I found this coin.  LOL it is now in the range of what I can afford.

hey man, I read your story in Flycoin thread, sorry for what happened.  i went through a few tough  lessons too about getting played by in the altcoin scene too.  kinda led me here too.   Transfercoin really has a great group leading it, and great community around it.  The irc is a great place to hangout and get rained some tx from Infernoman too. =)


"The developer want TransferCoin as a replacement for all other coins that have PoS and the inclusion of Masternodes."  - TheCryptoWorld.

I'm slowly replacing some of my other coins with tx.

[antho281]

Yeah! Welcome in

Looks more promising than AmberCoin at the moment!! Still sorry for what happenned

Ty - I am trying to get back on my feet which is how I found this coin.  LOL it is now in the range of what I can afford.

hey man, I read your story in Flycoin thread, sorry for what happened.  i went through a few tough  lessons too about getting played by in the altcoin scene too.  kinda led me here too.   Transfercoin really has a great group leading it, and great community around it.  The irc is a great place to hangout and get rained some tx from Infernoman too. =)


"The developer want TransferCoin as a replacement for all other coins that have PoS and the inclusion of Masternodes."  - TheCryptoWorld.

I'm slowly replacing some of my other coins with tx.

WoW!! I'm getting quoted!! That's awesome! Thanks about that ahah

[pokeytex]

Yeah! Welcome in

Looks more promising than AmberCoin at the moment!! Still sorry for what happenned

Ty - I am trying to get back on my feet which is how I found this coin.  LOL it is now in the range of what I can afford.

hey man, I read your story in Flycoin thread, sorry for what happened.  i went through a few tough  lessons too about getting played by in the altcoin scene too.  kinda led me here too.   Transfercoin really has a great group leading it, and great community around it.  The irc is a great place to hangout and get rained some tx from Infernoman too. =)


"The developer want TransferCoin as a replacement for all other coins that have PoS and the inclusion of Masternodes."  - TheCryptoWorld.

I'm slowly replacing some of my other coins with tx.

Thank you - it is funny - I never heard of this coin before - I received a tweet about it and now here i am! :-)

[YourMom420]

win wallet link is down