[ANN] [DRZ-V3] [DROIDZ-V3] [ANTI-INSTAMINE] - A FRESH NEW START - WALLET 3.0.1

[psychofractor]

staking=0 in the .conf is enough ...

the coins that were currently mined and were staking 'should' just confirm and become part of your wallet drz ...

then get the swap done and you should be fine after that ...

with that command in the .conf - the wallet will know not to stake any more coins - even if the wallet is open ...

at least - that is what it 'should' do ...

#crysx

Well, I sure hope so! It shouldn't have started staking before the wallet was unlocked either, but mine did!

Right now the v2.5 blockchain is moving so slowly that it will take days before I have enough confirmations so I can free up the coins to be swaped. Is there a way of speeding up the process? Luckily I managed to swap most of my coins, but I would hate to see the deadline pass before the wallet is done staking...

[Jazzycrypt]

i had installed client v2.5 , all blocks have been loaded, have 3 active connections - but still "out of sync". I had written some nodes to conf file , but doesnt help. I made 1 test transaction but it's unconfirmed.

[drays]

i had installed client v2.5 , all blocks have been loaded, have 3 active connections - but still "out of sync". I had written some nodes to conf file , but doesnt help. I made 1 test transaction but it's unconfirmed.

The OLD-DRZ network is extremely slow now, if you care to read few posts before your, you will realize that.

[chrysophylax]

staking=0 in the .conf is enough ...

the coins that were currently mined and were staking 'should' just confirm and become part of your wallet drz ...

then get the swap done and you should be fine after that ...

with that command in the .conf - the wallet will know not to stake any more coins - even if the wallet is open ...

at least - that is what it 'should' do ...

#crysx

Well, I sure hope so! It shouldn't have started staking before the wallet was unlocked either, but mine did!

Right now the v2.5 blockchain is moving so slowly that it will take days before I have enough confirmations so I can free up the coins to be swaped. Is there a way of speeding up the process? Luckily I managed to swap most of my coins, but I would hate to see the deadline pass before the wallet is done staking...

when soopy transfers 70kdrz2 to each of the nodes - three nodes in total so 210kdrz2 in total - they are on 24 /7 and after the minimum stake time the blockchain will start moving along better ...

soopy cant have that main wallet online 24 / 7 ... so its better to have the nodes do the work ...

so far - he has yet transfer any coins to the nodes ...

#crysx

[chrysophylax]

i had installed client v2.5 , all blocks have been loaded, have 3 active connections - but still "out of sync". I had written some nodes to conf file , but doesnt help. I made 1 test transaction but it's unconfirmed.

The OLD-DRZ network is extremely slow now, if you care to read few posts before your, you will realize that.

yup - thats the case ...

tanx drays ...

hopefully soopy will get a move on and transfer soon ...

#crysx

[drays]

I have an impression most people here just have an ability to write, but not to read (I am not referring to the last post from Jazzycrypt, but to all the last pages here ). Its frustrating. I will probably hold back for now, and just look how this coin and its wonderful "community" will proceed...

Anyway, just my probably last 2 cents for anybody who may need this: here is the DRZ-OLD bootstrap:

https://mega.nz/#!PoFT0Q4C!ys09WZSlb3Eq6gWwy5qqW8q6GdbQmmgZLjNIrUpbPUY

If you cannot sync the DRZ v.2.5 wallet past some early blocks, unzip this file, and put "bootstrap.dat" in your "droidz" folder (where the "wallet.dat" is placed), and restart the wallet. Then wait. Depending on the speed of your PC, it may take few hours to read blocks from the bootstrap.
This will take you to block 261000+, so you will have just few blocks to sync. Note: after this you will still be "out of sync" because in fact the network is very slow and practically stopped regardless of what SoopY wrote above.

[chrysophylax]

I have an impression nost people here just have an ability to write, but not to read (I am not referting to the last post from Jazzycrypt, but to all the last pages here ). Its frustrating. I will probably leave this coin and its wonderful "community".

Anyway, just my probably last 2 cents for anybody who may need this: here is the DRZ-OLD bootstrap:

https://mega.nz/#!PoFT0Q4C!ys09WZSlb3Eq6gWwy5qqW8q6GdbQmmgZLjNIrUpbPUY

If you cannot sync the DRZ v.2.5 wallet past some early blocks, unzip this file, and put "bootstrap.dat" in your "droidz" folder (where the "wallet.dat" is placed), and restart the wallet. Then wait. Depending on the speed of your PC, it may take few hours to read blocks from the bootstrap.
This will take you to block 261000+, so you will have just few blocks to sync. Note: after this you will still be "out of sync" because in fact the network is very slow and practically stopped regardless of what SoopY wrote before.

tanx drays ...

it would be a sad day if you left here mate ...

im pulling my hair out in other ways too - so its not an easy call ... i sleep while you all are awake ... so i miss out on a lot of things that get done here - but i still read up and catch up on what is said and done ...

the frustration is not so much that things arent getting done - its they are taking too damn long to do ...

but all the info you have supplied - with the help and support - is all you can do - as with any of us ... its all any of us can do ...

tanx again ...

#crysx

[GREEDYJOHN]

I am happy that we had everyone around today 

[varenn]

when soopy transfers 70kdrz2 to each of the nodes - three nodes in total so 210kdrz2 in total - they are on 24 /7 and after the minimum stake time the blockchain will start moving along better ...

This nodes must generate more than 110 blocks from the start to move the chain alone. Do you think they will be able to do it ? Otherwise all coins will be frozen in stake without confirmations.

[GREEDYJOHN]

when soopy transfers 70kdrz2 to each of the nodes - three nodes in total so 210kdrz2 in total - they are on 24 /7 and after the minimum stake time the blockchain will start moving along better ...

This nodes must generate more than 110 blocks from the start to move the chain alone. Do you think they will be able to do it ? Otherwise all coins will be frozen in stake without confirmations.

Things will be possible when soopy comes back. It is usual for soopy to be a bit absent over the weekend, so no worries.

[varenn]

Things will be possible when soopy comes back.

only 3 new blocks were generated in time of his last comeback. https://chainz.cryptoid.info/drzold/
we need much more  hope it's will not be a problem.

[chrysophylax]

Things will be possible when soopy comes back.

only 3 new blocks were generated in time of his last comeback. https://chainz.cryptoid.info/drzold/
we need much more   hope it's will not be a problem.

of course ...

i hold most of my own personal coins in the drz3 nodes - staking 24 / 7 ...

and with so many with open wallets and staking also - how fast is the drz3 blockchain moving along? ... ...

https://chainz.cryptoid.info/drz/# ...

dont worry - soopy just needs to get this set ...

now that he has disappeared again - we need him to come back from his 'sleep' and deposit the coins ... the sooner he does - the sooner the blockchain will move ...

#crysx

[psychofractor]

  (<-can't read  )

[jin518]

I repeat:

DEADLINE for all DROIDZ swaps is 9th March 2016, as soopy has stated earlier.

This date may not be extended. Unswapped coins might be lost FOREVER.

We need SoopY to stake his wallets!! Without this the DRZ-OLD network is stopped (I have warned before this could happen if swap wallet will not stake), so no new swaps are possible currently!

I'm staking the wallet guys. The network is moving. And new swaps are possible none the less , I do not see anyone has attempted to for the last few hours.

My wallet wont sync. Stuck at block 416 for days.
I added
drz-seed1.granitecoin.com
drz-seed2.granitecoin.com
drz-seed3.granitecoin.com

to my \droidz\droidz.conf

and i get 2 connections.
What goes wrong?

hi cryptomaik ...

this sounds like the drz2 wallet - is that right? ...

the drz2 wallet update REQUIRES the original blockchain to be present when upgrading the wallet for it to work properly and sync to swap the coin ...

im assuming you deleted all but the wallet.dat and droidz.conf files in the droidz directory ...

do you have a copy of the old blockchain? ...

#crysx

Hi,chrysophylax,my wallet is sync stucks on block 416 also,wallet not synchronizing for 12 hours.

getinfo
{
"version" : "v2.5.0.0: Assembly-beta",
"protocolversion" : 80001,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 416,
"timeoffset" : 97,
"moneysupply" : 2063200.00000000,
"connections" : 4,
"proxy" : "",
"ip" : "161.202.93.205",
"difficulty" : {
"proof-of-work" : 175.26754560,
"proof-of-stake" : 0.00024414
},
"testnet" : false,
"keypoololdest" : 1456410796,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00000000,
"errors" : ""
}

it wont move past that ...

it is required to have the old blockchain in tact and running BEFORE you upgrade to the new drz2 wallet ...

do you have the old blockchain? ...

#crysx

have not...

[drays]

have not...

Get it from the link here: https://bitcointalk.org/index.php?topic=1366516.msg14028661#msg14028661

[Jazzycrypt]

can someone give me some more nodes for client v.2.5? - i have 5 connections, but still "out of sync" (more than day)


my droidz.conf now:

staking=0

addnode=drz-seed1.granitecoin.com
addnode=drz-seed2.granitecoin.com
addnode=drz-seed3.granitecoin.com
addnode=51.254.216.250:5124
addnode=51.254.216.251:5124
addnode=51.254.216.25:5124
addnode=188.165.3.6:5124
addnode=46.53.179.241:32216
addnode=98.108.241.238:52194
addnode=78.111.189.157:10420

[Sniper76]

I have just the drz-seed's address and my wallet is synced now.

It will be fine normally with your conf file.
Until now, mine also was out of sync for more than 24H, because no block was created during this lap time.

Check https://chainz.cryptoid.info/drzold/ for know the last block age and if network move

[GREEDYJOHN]

I have just the drz-seed's address and my wallet is synced now.

It will be fine normally with your conf file.
Until now, mine also was out of sync for more than 24H, because no block was created during this lap time.

Check https://chainz.cryptoid.info/drzold/ for know the last block age and if network move

Please keep staking your wallet, so that people can swap their coins.

[Jazzycrypt]

my v.2.5 client received latest block but it still "out of sync"

If anyone have OLD DRZ unswapped - please keep your software online, because swap process is really dead!!

[drays]

  (<-can't read  )

You definitely can read, I have to admit