R9 Nano Modded Rom

[citronick]

Citronick.

Try atiflash -i or -ai and make sure the devices are being listed at the dos prompt.. your command line looks correct.

Best Regards
d57heinz

same error... strange.... but I can see them on TRIXX and Device Manager

[d57heinz]

Citronick.

Try atiflash -i or -ai and make sure the devices are being listed at the dos prompt.. your command line looks correct.

Best Regards
d57heinz

same error... strange.... but I can see them on TRIXX and Device Manager

check my previous post for edit.. Also are you booting into dos. or is this at windows command prompt
you have to be in dos only for atiflash to work and i dont trust winflash for this operation.

Best Regards

Citronick.

Try atiflash -i or -ai and make sure the devices are being listed at the dos prompt.. your command line looks correct.  no it is wrong my bad

a -f -p 0 DPM-100mV.rom

first run the command above making sure you assign the right slot with the -p command.. its either going to be slot 1 or 0

Best Regards
d57heinz

[d57heinz]

this is one of the many guides i stumbled on my journey's.. Its very nice. http://www.techpowerup.com/forums/threads/amd-ati-flashing-guide.212849/

Best Regards
d57heinz

[philipma1957]

okay I have a rig with 2 r9 nanos and 1 r9 390

this is my premium rig  it does about 77mh at about 600 watts.

I know this is good,but I am looking for better.

this is done with msi afterburner

the nanos are
 -100
  1000 freq clock
  500 freq clock

the r9 390

is

-100 clock
1000 freq clock gpu
1250  freq clock memory

a 760 watt plat corsair
dd4r4 low volt ram
a m2 ssd
a biostar z170 mobo
an i5 -6500t cpu

this mobo can do 4 cards if they were all nano so I have a few options to improve this board.

I have a 3rd nano I could add it and add a r9 380   it would all fit.

but I really want to know how low are you getting the nanos to do lets say 26mh a nano

can you get them to 170 watts and do 26mh with the mods / flash

[WotanWipeout]

I made a modded ROM for my Nanos.
1050 Mhz / 300 RAM results in 30.8 Mhash with Ethereum.

Power Consumption is around 175 when i remember well.

VCore starts with 1.125V, while Mining 1.1V

Cooling with Raijintek Morpheus 2 and 2 Arctic F 12 120mm -> 39 Degrees.

If interested, i can post a Pic of the Nanos. Mounting the Raijintek Morpheus is not without problems, but
i think i got a solution.

[Q_R_V]

I would like to see how nano looks with that big cooler, post a pic pls.

[citronick]

okay I have a rig with 2 r9 nanos and 1 r9 390

this is my premium rig  it does about 77mh at about 600 watts.

I know this is good,but I am looking for better.

this is done with msi afterburner

the nanos are
 -100
  1000 freq clock
  500 freq clock

the r9 390

is

-100 clock
1000 freq clock gpu
1250  freq clock memory

a 760 watt plat corsair
dd4r4 low volt ram
a m2 ssd
a biostar z170 mobo
an i5 -6500t cpu

this mobo can do 4 cards if they were all nano so I have a few options to improve this board.

I have a 3rd nano I could add it and add a r9 380   it would all fit.

but I really want to know how low are you getting the nanos to do lets say 26mh a nano

can you get them to 170 watts and do 26mh with the mods / flash

Hi Phillip - My MSI R9 390 at -100mV, 1028Mhz GPU and 1500Mhz Mem runs at 29.9MHs using CDM 4.4
Sapphire Nano -100mV, 1150Mhz GPU and 525Mhz Mem runs up to 26.8Mhs also using CDM 4.4 (No ROM mod yet)
With Eliovp's ROM mod - I hope to get the Nanos to hit 6xNano=185MHs@1050watts (1020mhz core, 300mhz mem)

[citronick]

I made a modded ROM for my Nanos.
1050 Mhz / 300 RAM results in 30.8 Mhash with Ethereum.

Power Consumption is around 175 when i remember well.

VCore starts with 1.125V, while Mining 1.1V

Cooling with Raijintek Morpheus 2 and 2 Arctic F 12 120mm -> 39 Degrees.

If interested, i can post a Pic of the Nanos. Mounting the Raijintek Morpheus is not without problems, but
i think i got a solution.

pix please

[WotanWipeout]

Pics:

Upside: (Its not only the Morpheus  )

http://www.fotos-hochladen.net/uploads/20160527142152bu8in7xr1t.jpg

Dwonside:

http://www.fotos-hochladen.net/uploads/20160527142207tz2jsfhr53.jpg


Back:

http://www.fotos-hochladen.net/uploads/201605271422176e2ki5mzx7.jpg

http://www.fotos-hochladen.net/uploads/20160527142227waxgzin90r.jpg

Thats it.

Just running a ETH-Test.....64 Mhash so far.....420 Watt out of the wall, whole PC (2 Nanos).

[philipma1957]

okay I have a rig with 2 r9 nanos and 1 r9 390

this is my premium rig  it does about 77mh at about 600 watts.

I know this is good,but I am looking for better.

this is done with msi afterburner

the nanos are
 -100
  1000 freq clock
  500 freq clock

the r9 390

is

-100 clock
1000 freq clock gpu
1250  freq clock memory

a 760 watt plat corsair
dd4r4 low volt ram
a m2 ssd
a biostar z170 mobo
an i5 -6500t cpu

this mobo can do 4 cards if they were all nano so I have a few options to improve this board.

I have a 3rd nano I could add it and add a r9 380   it would all fit.

but I really want to know how low are you getting the nanos to do lets say 26mh a nano

can you get them to 170 watts and do 26mh with the mods / flash

Hi Phillip - My MSI R9 390 at -100mV, 1028Mhz GPU and 1500Mhz Mem runs at 29.9MHs using CDM 4.4
Sapphire Nano -100mV, 1150Mhz GPU and 525Mhz Mem runs up to 26.8Mhs also using CDM 4.4 (No ROM mod yet)
With Eliovp's ROM mod - I hope to get the Nanos to hit 6xNano=185MHs@1050watts (1020mhz core, 300mhz mem)

what is cdm 4.4? 

I am using qtminer

[WotanWipeout]

Claymores Dual Miner.

[philipma1957]

Claymores Dual Miner.

Thanks I will check it out.

[mrmaroon]

Are you guys running 1000Mhz plus running without a monitor? Still cant hit above 960mhz and im running my monitor on low res off a 380 strix card? Would that still affect the cards on risers?

[mrmaroon]

Citronick.

Try atiflash -i or -ai and make sure the devices are being listed at the dos prompt.. your command line looks correct.  no it is wrong my bad

a -f -p 0 DPM-100mV.rom

first run the command above making sure you assign the right slot with the -p command.. its either going to be slot 1 or 0

Best Regards
d57heinz

In Eliovops readme it says to use -p -f "slot" maybe that is what im messing up?

edit: It does say in atiflash help to use -p "slot" "file"

[d57heinz]

Citronick.

Try atiflash -i or -ai and make sure the devices are being listed at the dos prompt.. your command line looks correct.  no it is wrong my bad

a -f -p 0 DPM-100mV.rom

first run the command above making sure you assign the right slot with the -p command.. its either going to be slot 1 or 0

Best Regards
d57heinz

In Eliovops readme it says to use -p -f "slot" maybe that is what im messing up?

edit: It does say in atiflash help to use -p "slot" "file"

yes the -f makes it force the bios regardless of match .  The -p i assume means port.  Which would be followed by a number of the slot the card is in..  Easy to swap those up since they look so close .. I missed it on citronick initial post because i read it too fast..

[Zeelotin]

In the R9 nano, all the different brand cards use the same bios, so the mod rom fit them all, there is no need to use -f.

[citronick]

Claymores Dual Miner.

Thanks I will check it out.

CDM mines ETH and DCR together.

I use the ETH only mode, and CDM can push the 390 to near 30MHs.

I used qtminer before this because of the Stratum mode, now it's all CDM for my 390 rigs (149.5MHs@5x390@1290w-1350w@-100mV/1028Mhz/1500Mhz). Quite slick this miner, and its has many bells and whistles like failover, monitoring, solo-mode w/o proxy and it's Stratum compliant too.

I will be attempting Eliovp's Nano mod for my first Nano rig (I am still trying to get an afternoon off to do this). And combined with CDM, I think we have a winner for the highest hash at lowest possible wattage, amps for ETH mining.

[Nabicoma]

Claymores Dual Miner.

Thanks I will check it out.

CDM mines ETH and DCR together.

I use the ETH only mode, and CDM can push the 390 to near 30MHs.

I used qtminer before this because of the Stratum mode, now it's all CDM for my 390 rigs (149.5MHs@5x390@1290w-1350w@-100mV/1028Mhz/1500Mhz). Quite slick this miner, and its has many bells and whistles like failover, monitoring, solo-mode w/o proxy and it's Stratum compliant too.

I will be attempting Eliovp's Nano mod for my first Nano rig (I am still trying to get an afternoon off to do this). And combined with CDM, I think we have a winner for the highest hash at lowest possible wattage, amps for ETH mining.

Have you tried to mine with 1200 memory frequency. For my XFX 390 cards, there is no difference between 1200 and 1500MHz with 1050 Core.

[citronick]

Claymores Dual Miner.

Thanks I will check it out.

CDM mines ETH and DCR together.

I use the ETH only mode, and CDM can push the 390 to near 30MHs.

I used qtminer before this because of the Stratum mode, now it's all CDM for my 390 rigs (149.5MHs@5x390@1290w-1350w@-100mV/1028Mhz/1500Mhz). Quite slick this miner, and its has many bells and whistles like failover, monitoring, solo-mode w/o proxy and it's Stratum compliant too.

I will be attempting Eliovp's Nano mod for my first Nano rig (I am still trying to get an afternoon off to do this). And combined with CDM, I think we have a winner for the highest hash at lowest possible wattage, amps for ETH mining.

Have you tried to mine with 1200 memory frequency. For my XFX 390 cards, there is no difference between 1200 and 1500MHz with 1050 Core.

WI'll try it out. My 390 is MSI so I think no issues in underclocking the memory mhz.

[Eliovp]

Hey guys, just got back from holiday.

My apologies for not being able to reply to all messages.

Claymores Dual Miner.

Thanks I will check it out.

CDM mines ETH and DCR together.

I use the ETH only mode, and CDM can push the 390 to near 30MHs.

I used qtminer before this because of the Stratum mode, now it's all CDM for my 390 rigs (149.5MHs@5x390@1290w-1350w@-100mV/1028Mhz/1500Mhz). Quite slick this miner, and its has many bells and whistles like failover, monitoring, solo-mode w/o proxy and it's Stratum compliant too.

I will be attempting Eliovp's Nano mod for my first Nano rig (I am still trying to get an afternoon off to do this). And combined with CDM, I think we have a winner for the highest hash at lowest possible wattage, amps for ETH mining.

Have you tried to mine with 1200 memory frequency. For my XFX 390 cards, there is no difference between 1200 and 1500MHz with 1050 Core.

WI'll try it out. My 390 is MSI so I think no issues in underclocking the memory mhz.

When mining Eth, you can easily down clock that mem to 1125. Works perfectly

And if you can, undervolt AUX (Voltage given to the memory controller), it won't make such a huge impact, but every bit counts

Greetings!