irritant
Sr. Member
Offline
Activity: 473
Merit: 250
Sodium hypochlorite, acetone, ethanol
|
|
September 10, 2016, 06:24:46 PM |
|
Did read a lot of page of this thread and didnt find how to run 1 stick on windows ? Any suggestion. I have 2 stick on the same hub and will like to join the contest https://bitcointalk.org/index.php?topic=1173963.0======= =Software= ======= The stickminer will enumerate as an antminer U3 on cgminer (if the version of cgminer you're using supports the U3), and should run fine. It may give warnings about "no valid hashes within 3 seconds" but this is fine, as the U3 has a higher hashrate, confusing cgminer but not noticeably affecting performance. If your hardware errors are low you're fine. These older version of cgminer do not allow a clock rate over 250MHz. This is pretty good for most people as that's moderately high power but in theory the chips will run up to 500MHz. Luke Jr added bfgminer support in bfgminer 5.3.0, so you may use that version of bfgminer. I (novak) have written a cgminer driver which enumerates the compacs as expected, removes the error, and ramps up the clock slowly to prevent spikes on USB power. My custom cgminer can be found here: source code: gekkoscience.com/misc/cgminer-gekko.tar.gzwin32 binary: gekkoscience.com/misc/cgminer-gekko-win32.zipEDIT: The current version supports bitshopper compacs as well, and can be (and is, in the case of windows) compiled with icarus support.I have not yet tested it but edonkey was nice enough to upload a custom minera image with cgminer-gekko enabled as a custom miner. You can set the frequency under manual options as: --compac-freq 150. Link: https://dbtbmm05cubzd.cloudfront.net/cryptocurrency/mods/minera_compac_mod.zipOn the engineering sample sticks you can only use old cgminer as the newer drivers for both cgminer and bfgminer depend on a hexfile flashed to the cp2102 which the engineering samples do not have. If you need to run cgminer on windows (either stock or mine), you'll need to install the zadig driver. You can find it here: http://ck.kolivas.org/apps/cgminer/zadig/Run the program and install the winusb driver for the compac(s) that you have plugged into your windows machine. You may need to replug the compacs afterwards while cgminer is running to get them to start mining. ========= =How to Run= ========= Old cgminer: To build use --enable-icarus flag. ./cgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --au3-freq 150 --------------------------------------------------------------------------------------------------------------- GekkoScience cgminer: To build use --enable-gekko flag. ./cgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150 --------------------------------------------------------------------------------------------------------------- bfgminer: ./bfgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -O 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --set compac:clock=x0b83 ---------------------------------------------------------------------------------------------------------------
|
|
|
|
valkir
Legendary
Offline
Activity: 1484
Merit: 1004
|
|
September 10, 2016, 07:02:28 PM |
|
Im able to run them but not 1 at a time. They both run on the same cgminer.
|
██ Please support sidehack with his new miner project Send to :
1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
September 12, 2016, 10:31:01 AM |
|
Im able to run them but not 1 at a time. They both run on the same cgminer.
Hi Valkir, I think, all what you have to do is: 1. run cgminer with all gekkos 2. press "U" (for USB devices) 3. there you´ll see a list of all devices, e.g. three device like this: 1:4 Gekko xyz 1:7 Gekko xyz 1:8 Gekko xyz 4. Now stop the cgminer and attach an each Gekko the proper USB-Bus value, in this form: --usb 1:4 --usb 1:7 --usb 1:8 Now you´re able to start all your gekkos, every in a single run... Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
zOU
|
|
September 14, 2016, 05:23:11 AM |
|
here's my .sh file for my 6 sticks sudo screen -dmS cgminer-g1 ./cgminer --api-port 4001 --usb :1 --compac-freq 300 -o stratum+tcp://de.ckpool.org:3333 -u ****.gekko1 -p 1234 sudo screen -dmS cgminer-g2 ./cgminer --api-port 4002 --usb :1 --compac-freq 300 -o stratum+tcp://de.ckpool.org:3333 -u ****.gekko2 -p 1234 sudo screen -dmS cgminer-g3 ./cgminer --api-port 4003 --usb :1 --compac-freq 300 -o stratum+tcp://de.ckpool.org:3333 -u ****.gekko3 -p 1234 sudo screen -dmS cgminer-g4 ./cgminer --api-port 4004 --usb :1 --compac-freq 300 -o stratum+tcp://de.ckpool.org:3333 -u ****.gekko4 -p 1234 sudo screen -dmS cgminer-g5 ./cgminer --api-port 4005 --usb :1 --compac-freq 300 -o stratum+tcp://de.ckpool.org:3333 -u ****.gekko5 -p 1234 sudo screen -dmS cgminer-g6 ./cgminer --api-port 4006 --usb :1 --compac-freq 300 -o stratum+tcp://de.ckpool.org:3333 -u ****.gekko6 -p 1234 --usb :1 will pick only 1 device.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
September 15, 2016, 06:14:35 PM |
|
Two recent cksolo block solves, a new game is afoot. Mine on!
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
September 15, 2016, 07:20:14 PM |
|
Two recent cksolo block solves, a new game is afoot. Mine on!
yess
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
kipper01
Full Member
Offline
Activity: 214
Merit: 100
1KippERXwH1PdBxKNt1ksgqh89WBv6CtWQ
|
|
September 19, 2016, 12:48:27 AM |
|
|
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
September 19, 2016, 08:41:09 AM |
|
No, that what kipper wants to say, is he got only an empty page instead his own detailed statistics... I got this problem too a couple of weeks ago with my ants, so I was asking minibit and ami1984. It´s an problem with the code, there is a memory limit in the database, when it runs over its limit, than you´ll see only a empty page, instead your stats. I can try to contact minibit (think he is able to fix this Prob), but not sure if he wants (or can) take the time for it... BTW: zOU, you got the same prob . Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
September 20, 2016, 06:46:43 AM |
|
Woo, new best ever for me and the #1 spot for now. Also looks to be the 4th highest bestever of the run. {"hashrate1m": "19.8G", "hashrate5m": "20.2G", "hashrate1hr": "19.2G", "hashrate1d": "18.8G", "hashrate7d": "16.3G", "lastupdate": 1474353919, "shares": 32921420, "bestshare": 289248611.19880897, "bestever": 289248611}
|
|
|
|
kipper01
Full Member
Offline
Activity: 214
Merit: 100
1KippERXwH1PdBxKNt1ksgqh89WBv6CtWQ
|
|
September 21, 2016, 02:12:59 AM |
|
No, that what kipper wants to say, is he got only an empty page instead his own detailed statistics... I got this problem too a couple of weeks ago with my ants, so I was asking minibit and ami1984. It´s an problem with the code, there is a memory limit in the database, when it runs over its limit, than you´ll see only a empty page, instead your stats. I can try to contact minibit (think he is able to fix this Prob), but not sure if he wants (or can) take the time for it... BTW: zOU, you got the same prob . Cheers, andY Thanks Andy.
|
|
|
|
earlmo
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
September 21, 2016, 03:14:00 AM Last edit: September 21, 2016, 01:10:14 PM by earlmo |
|
Yes! Finally it happened! Rank Racer Frequency Shares Bestshare Bestever : : 25 andymanone G1 125.00 MHz 37.600.750 355.142 49.412.661 26 minibit g1 150.00 MHz 21.621.280 334.405 319.718.914 [b]27 earlmo 1 393.75 MHz 61.831.000 270.412 53.942.602[/b] 28 kipper01 8 Miner offline 4.741.107 189.595 10.169.362 29 minibit g4 Miner offline 1.347.674 0 8.451.580
I have managed to have the highest frequency, greatest number of shares and yet have the lowest current bestshare of any active miner. Take that statistics! .earl [edit] And just like that, I bounce up to mid-pack. I just wanted to show that stats aren't the whole story--luck (both good and bad) plays a large part in mining. Don't give up on the sticks, they are capable of finding a block (with some luck).
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
October 10, 2016, 09:27:47 PM |
|
...after a long time beeing the last one, now finally to be on top, maybe for a very short moment - but I feel good . Yeeaahh !
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
zOU
|
|
October 14, 2016, 06:09:17 AM |
|
lots of offline compac after the last block found..
I had to restart my RPI too to get my miners back online...
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
October 14, 2016, 08:34:32 AM |
|
lots of offline compac after the last block found..
I had to restart my RPI too to get my miners back online...
Yeeah, don´t know, why it happend . But great, to see you online again . andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
October 20, 2016, 06:44:54 AM |
|
Good enough for #2 at the moment. "hashrate1m": "22.4G", "hashrate5m": "19.3G", "hashrate1hr": "19.2G", "hashrate1d": "17.9G", "hashrate7d": "17.8G", "lastupdate": 1476945810, "shares": 43725780, "bestshare": 14070363.706076866
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
October 20, 2016, 09:33:38 AM Last edit: October 20, 2016, 11:45:47 AM by andymanone |
|
Good enough for #2 at the moment. "hashrate1m": "22.4G", "hashrate5m": "19.3G", "hashrate1hr": "19.2G", "hashrate1d": "17.9G", "hashrate7d": "17.8G", "lastupdate": 1476945810, "shares": 43725780, "bestshare": 14070363.706076866 Well done, Mike I improved to the 2nd place too @antrun . EDIT: 13:44 CETOkay, just down to the 3. andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
October 20, 2016, 06:11:37 PM |
|
And just like that I'm #3 already haha. zOU holding down the 1 & 2.
|
|
|
|
zOU
|
|
October 21, 2016, 06:26:00 AM |
|
|
|
|
|
zOU
|
|
October 22, 2016, 04:38:05 PM |
|
new block and I have half the miners alive 6/12
|
|
|
|
|