Spotswood (OP)
|
|
June 28, 2016, 02:36:31 AM |
|
How would you go about using this frame for r9 295x2 card with radiators? I have 10 of these cards and looking for a frame that would nicely hold the card and radiators so air cooling is efficient in the same direction.
I would recommend a custom solution based on the standard "wide" or "deep" versions of these. How many cards and PSUs per motherboard?
|
|
|
|
|
|
|
|
Even if you use Bitcoin through Tor, the way transactions are handled by the network makes anonymity difficult to achieve. Do not expect your transactions to be anonymous unless you really know what you're doing.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
PPOC
|
|
June 28, 2016, 02:46:03 AM |
|
How would you go about using this frame for r9 295x2 card with radiators? I have 10 of these cards and looking for a frame that would nicely hold the card and radiators so air cooling is efficient in the same direction.
I would recommend a custom solution based on the standard "wide" or "deep" versions of these. How many cards and PSUs per motherboard? ATM one MB with 3 cards, but using win7 and can't get more to cards detected even though MB has 6 slots. I was going to try Linux and see if I can get 6 cards on the MB running which would be 12 GPU since each card is 2 GPU's. ATM using EVGA 1600 Plat PSU for 3 cards, if I can get more then 3 on the MB, then I would use 2 x 1300 EVGA or 2 x 1600 EVGA. If all 6 cards work on the MB, then prob use 3 X 1300 EVGA and use the 1600 on another rig. How much would a custom setup run me?
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
Spotswood (OP)
|
|
June 28, 2016, 03:10:07 AM Last edit: February 07, 2021, 07:31:28 AM by Spotswood |
|
How would you go about using this frame for r9 295x2 card with radiators? I have 10 of these cards and looking for a frame that would nicely hold the card and radiators so air cooling is efficient in the same direction.
I would recommend a custom solution based on the standard "wide" or "deep" versions of these. How many cards and PSUs per motherboard? ATM one MB with 3 cards, but using win7 and can't get more to cards detected even though MB has 6 slots. I was going to try Linux and see if I can get 6 cards on the MB running which would be 12 GPU since each card is 2 GPU's. ATM using EVGA 1600 Plat PSU for 3 cards, if I can get more then 3 on the MB, then I would use 2 x 1300 EVGA or 2 x 1600 EVGA. If all 6 cards work on the MB, then prob use 3 X 1300 EVGA and use the 1600 on another rig. How much would a custom setup run me? An extra-extra wide version of the "deep" mining tray would be ~$225:
|
|
|
|
Spotswood (OP)
|
|
July 22, 2016, 11:57:58 PM Last edit: February 07, 2021, 07:31:45 AM by Spotswood |
|
|
|
|
|
gt_addict
|
|
August 27, 2016, 02:06:54 PM |
|
Hi,
Do you ship to the UK? Reason I ask is I'm contemplating doing a small watercooling setup for a couple of gekko USB miners running from a raspberry pi and wanted to have it contained in one unit with the res/pump, rad, pi, USB hub etc all mounted in the frame.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
Spotswood (OP)
|
|
August 27, 2016, 03:41:46 PM |
|
Hi,
Do you ship to the UK? Reason I ask is I'm contemplating doing a small watercooling setup for a couple of gekko USB miners running from a raspberry pi and wanted to have it contained in one unit with the res/pump, rad, pi, USB hub etc all mounted in the frame.
Yes, we ship worldwide. You probably want a full-blown test bench: http://spotswoodcomputercases.com/wp/?page_id=531
|
|
|
|
gt_addict
|
|
August 27, 2016, 05:13:04 PM |
|
Hi,
Do you ship to the UK? Reason I ask is I'm contemplating doing a small watercooling setup for a couple of gekko USB miners running from a raspberry pi and wanted to have it contained in one unit with the res/pump, rad, pi, USB hub etc all mounted in the frame.
Yes, we ship worldwide. You probably want a full-blown test bench: http://spotswoodcomputercases.com/wp/?page_id=531 Nice one thanks spotswood I'll take a look at your site and see what best suits my needs
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
Spotswood (OP)
|
|
October 29, 2016, 12:54:01 PM Last edit: February 07, 2021, 07:32:08 AM by Spotswood |
|
|
|
|
|
qctechno
|
|
November 27, 2016, 05:36:20 PM |
|
My rig : 6x GTX1060, 1x EVGA G2 1000W, Mobo + SSD I'm in Canada I want to order a GPU frame but, sadly, you don't accept BTC.
|
|
|
|
ZeroGee
Member
Offline
Activity: 92
Merit: 10
|
|
November 29, 2016, 12:30:42 AM |
|
I'd buy a rig to support 4x 7950 and 1x 295x2, if you took bitcoin.
|
|
|
|
Spotswood (OP)
|
|
December 22, 2016, 01:20:38 PM Last edit: February 07, 2021, 07:32:30 AM by Spotswood |
|
New model! All aluminum, mining frames for 6-7 GPUs and 2 PSUs*: * Computer hardware not included. - Made from anodized aluminum extrusions.
- USB risers (not included) are safely bolted to the frame.
- Twenty four-inches wide. Spacing between 6 GPUs is ~3.5-inches, 7 GPUs is ~3-inches.
- Safely bolt up to two ATX PSUs to the frame.
- Motherboard bolts to frame via 5/8″ tall aluminum standoffs/spacers.
- Stackable.
- Ships as a kit.
- Dimensions: 14.25 x 14.25 x 24-inches.
This frame for 7 GPUs is $135USD, plus shipping from Washington. PayPal only.
|
|
|
|
stewbeast
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 03, 2017, 01:27:51 PM |
|
New model! All aluminum, mining frames for 6-7 GPUs and 2 PSUs*: ... http://www.spotswoodcomputercases.com/images/mining/frames/6gpuBackWithRig.png* Computer hardware not included. - Made from anodized aluminum extrusions.
- USB risers (not included) are safely bolted to the frame.
- Twenty four-inches wide. Spacing between 6 GPUs is ~3.5-inches, 7 GPUs is ~3-inches.
- Safely bolt up to two ATX PSUs to the frame.
- Motherboard bolts to frame via 5/8″ tall aluminum standoffs/spacers.
- Stackable.
- Ships as a kit.
- Dimensions: 14.25 x 14.25 x 24-inches.
This frame for 7 GPUs is $125USD, plus shipping from Washington. PayPal only. I would like to possibly order the 7 GPU model, but cannot find it on your site.
|
|
|
|
Spotswood (OP)
|
|
April 03, 2017, 04:32:32 PM Last edit: May 28, 2017, 06:46:20 PM by Spotswood |
|
New model! All aluminum, mining frames for 6-7 GPUs and 2 PSUs*: ... * Computer hardware not included. - Made from anodized aluminum extrusions.
- USB risers (not included) are safely bolted to the frame.
- Twenty four-inches wide. Spacing between 6 GPUs is ~3.5-inches, 7 GPUs is ~3-inches.
- Safely bolt up to two ATX PSUs to the frame.
- Motherboard bolts to frame via 5/8″ tall aluminum standoffs/spacers.
- Stackable.
- Ships as a kit.
- Dimensions: 14.25 x 14.25 x 24-inches.
This frame for 7 GPUs is $135USD, plus shipping from Washington. PayPal only. I would like to possibly order the 7 GPU model, but cannot find it on your site. No worries. Send me a PM or email and I'll get'em built for you.
|
|
|
|
a29654
|
|
April 03, 2017, 05:26:02 PM |
|
Might've misread your post but your including two PSUs? If so what brand and wattage
|
|
|
|
Spotswood (OP)
|
|
April 03, 2017, 05:57:50 PM Last edit: May 22, 2017, 06:00:39 AM by Spotswood |
|
Might've misread your post but your including two PSUs? If so what brand and wattage
No computer hardware included. The frames are built to hold either one or two ATX-style PSUs.
|
|
|
|
Spotswood (OP)
|
|
May 28, 2017, 07:01:24 PM Last edit: February 07, 2021, 07:33:01 AM by Spotswood |
|
New models coming this week! All models can handle 7-8 GPUs and are stackable. One PSU version, 24-inches wide (same footprint as the old "Wide Open-frame Mining Tray (one PSU)"): Two PSU version, 26-inches wide:
|
|
|
|
|
fullzero
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
June 02, 2017, 04:49:06 AM |
|
I really like the new models; I usually make my own frames, but I will probably get one of the Two PSU version soon.
|
|
|
|
MKLord
Newbie
Offline
Activity: 49
Merit: 0
|
|
June 07, 2017, 02:06:35 PM |
|
that frame height and width 25 mm ?
|
|
|
|
soulmachine
Newbie
Offline
Activity: 24
Merit: 0
|
|
July 05, 2017, 10:38:14 AM |
|
Any updates about the 12 GPU frame for Biostar TB250-BTC Pro ?
|
|
|
|
|