[FS] All aluminum open-air case frames (now with support beams for USB risers)

[Spotswood]

How would you go about using this frame for r9 295x2 card with radiators? I have 10 of these cards and looking for a frame that would nicely hold the card and radiators so air cooling is efficient in the same direction.

I would recommend a custom solution based on the standard "wide" or "deep" versions of these.  How many cards and PSUs per motherboard?

[1714669511]

1714669511

[1714669511]

1714669511

[1714669511]

1714669511

[1714669511]

1714669511

[1714669511]

1714669511

[1714669511]

1714669511

[PPOC]

How would you go about using this frame for r9 295x2 card with radiators? I have 10 of these cards and looking for a frame that would nicely hold the card and radiators so air cooling is efficient in the same direction.

I would recommend a custom solution based on the standard "wide" or "deep" versions of these.  How many cards and PSUs per motherboard?

ATM one MB with 3 cards, but using win7 and can't get more to cards detected even though MB has 6 slots. I was going to try Linux and see if I can get 6 cards on the MB running which would be 12 GPU since each card is 2 GPU's. ATM using EVGA 1600 Plat PSU for 3 cards, if I can get more then 3 on the MB, then I would use 2 x 1300 EVGA or 2 x 1600 EVGA. If all 6 cards work on the MB, then prob use 3 X 1300 EVGA and use the 1600 on another rig. How much would a custom setup run me?

[Spotswood]

How would you go about using this frame for r9 295x2 card with radiators? I have 10 of these cards and looking for a frame that would nicely hold the card and radiators so air cooling is efficient in the same direction.

I would recommend a custom solution based on the standard "wide" or "deep" versions of these.  How many cards and PSUs per motherboard?

ATM one MB with 3 cards, but using win7 and can't get more to cards detected even though MB has 6 slots. I was going to try Linux and see if I can get 6 cards on the MB running which would be 12 GPU since each card is 2 GPU's. ATM using EVGA 1600 Plat PSU for 3 cards, if I can get more then 3 on the MB, then I would use 2 x 1300 EVGA or 2 x 1600 EVGA. If all 6 cards work on the MB, then prob use 3 X 1300 EVGA and use the 1600 on another rig. How much would a custom setup run me?

An extra-extra wide version of the "deep" mining tray would be ~$225:

[Spotswood]

A couple of clients were nice enough to send me some pics of there rigs.

[gt_addict]

Hi,

Do you ship to the UK? Reason I ask is I'm contemplating doing a small watercooling setup for a couple of gekko USB miners running from a raspberry pi and wanted to have it contained in one unit with the res/pump, rad, pi, USB hub etc all mounted in the frame.

[Spotswood]

Hi,

Do you ship to the UK? Reason I ask is I'm contemplating doing a small watercooling setup for a couple of gekko USB miners running from a raspberry pi and wanted to have it contained in one unit with the res/pump, rad, pi, USB hub etc all mounted in the frame.

Yes, we ship worldwide.  You probably want a full-blown test bench: http://spotswoodcomputercases.com/wp/?page_id=531 

[gt_addict]

Hi,

Do you ship to the UK? Reason I ask is I'm contemplating doing a small watercooling setup for a couple of gekko USB miners running from a raspberry pi and wanted to have it contained in one unit with the res/pump, rad, pi, USB hub etc all mounted in the frame.

Yes, we ship worldwide.  You probably want a full-blown test bench: http://spotswoodcomputercases.com/wp/?page_id=531 

Nice one thanks spotswood I'll take a look at your site and see what best suits my needs 

[Spotswood]

I'm still building custom miners (ignore the cards pictured here, they are only being used to verify fitment).  







This one was built specifically for SAPPHIRE Technology's GPUs with "NITRO Free Flow" airflow.

[qctechno]

My rig : 6x GTX1060, 1x EVGA G2 1000W, Mobo + SSD
I'm in Canada

I want to order a GPU frame but, sadly, you don't accept BTC.
 

[ZeroGee]

I'd buy a rig to support 4x 7950 and 1x 295x2, if you took bitcoin.

[Spotswood]

New model!

All aluminum, mining frames for 6-7 GPUs and 2 PSUs*:









* Computer hardware not included.

• Made from anodized aluminum extrusions.
• USB risers (not included) are safely bolted to the frame.
• Twenty four-inches wide.  Spacing between 6 GPUs is ~3.5-inches, 7 GPUs is ~3-inches.
• Safely bolt up to two ATX PSUs to the frame.
• Motherboard bolts to frame via 5/8″ tall aluminum standoffs/spacers.
• Stackable.
• Ships as a kit.
• Dimensions: 14.25 x 14.25 x 24-inches.

This frame for 7 GPUs is $135USD, plus shipping from Washington.  PayPal only.  

[stewbeast]

New model!

All aluminum, mining frames for 6-7 GPUs and 2 PSUs*:

...

http://www.spotswoodcomputercases.com/images/mining/frames/6gpuBackWithRig.png

* Computer hardware not included.

• Made from anodized aluminum extrusions.
• USB risers (not included) are safely bolted to the frame.
• Twenty four-inches wide.  Spacing between 6 GPUs is ~3.5-inches, 7 GPUs is ~3-inches.
• Safely bolt up to two ATX PSUs to the frame.
• Motherboard bolts to frame via 5/8″ tall aluminum standoffs/spacers.
• Stackable.
• Ships as a kit.
• Dimensions: 14.25 x 14.25 x 24-inches.

This frame for 7 GPUs is $125USD, plus shipping from Washington.  PayPal only.  

I would like to possibly order the 7 GPU model, but cannot find it on your site.

[Spotswood]

New model!

All aluminum, mining frames for 6-7 GPUs and 2 PSUs*:

...



* Computer hardware not included.

• Made from anodized aluminum extrusions.
• USB risers (not included) are safely bolted to the frame.
• Twenty four-inches wide.  Spacing between 6 GPUs is ~3.5-inches, 7 GPUs is ~3-inches.
• Safely bolt up to two ATX PSUs to the frame.
• Motherboard bolts to frame via 5/8″ tall aluminum standoffs/spacers.
• Stackable.
• Ships as a kit.
• Dimensions: 14.25 x 14.25 x 24-inches.

This frame for 7 GPUs is $135USD, plus shipping from Washington.  PayPal only.  

I would like to possibly order the 7 GPU model, but cannot find it on your site.

No worries. Send me a PM or email and I'll get'em built for you.  
  

[a29654]

Might've misread your post but your including two PSUs? If so what brand and wattage

[Spotswood]

Might've misread your post but your including two PSUs? If so what brand and wattage

No computer hardware included.  The frames are built to hold either one or two ATX-style PSUs.

[Spotswood]

New models coming this week! All models can handle 7-8 GPUs and are stackable.

One PSU version, 24-inches wide (same footprint as the old "Wide Open-frame Mining Tray (one PSU)"):





Two PSU version, 26-inches wide:

[IntroVert]

PM sent

[fullzero]

I really like the new models; I usually make my own frames, but I will probably get one of the Two PSU version soon.   

[MKLord]

that frame height and width 25 mm ?

[soulmachine]

Any updates about the 12 GPU frame for Biostar TB250-BTC Pro ?