punin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 18, 2016, 11:53:46 AM |
|
I don't have any answers to those questions, because I have not yet received answers to those questions. I'm encouraged because Punin came to me at the end of August to say he was shipping me samples and how many did I want, which is pretty great because I hadn't tried to chase him down in a couple months. He's given ballpark estimates for chip pricing but it' just ballpark because he said they were still lining out how they were gonna do sales and distribution and whatnot. They've already been more cooperative than anyone I've dealt with in the last 16 months, and he's done really good in the past with their 55nm chips, so I'm banking pretty heavily on this deal working out.
As far as Bitfury goes, I'm not really sure what (from the little I know) I'm officially authorised to say or not. Pretty much all I will say is they got me samples and datasheets and I'm already started working on new stuff. I figure that PR can't possibly hurt them within the community, because it's about the first real effort any major manufacturer has done proactively to help the community in about a year.
I was going to say something like "never trust a guy that doesn't pay on a gentlemans bet" but maybe he "Forgot". ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Don't understand what you're talking about Kilo. I have repeatedly requested a BTC address from you. If you want chips instead, I can arrange than now as well. But without input from your side it's impossible for me to settle the bet.
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 18, 2016, 01:04:41 PM |
|
That is true, he asked for an address where to send the coin back in April or so. Now that everyone's here and talking, maybe you two can figure something out.
|
|
|
|
valkir
Legendary
Offline
Activity: 1484
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 19, 2016, 01:27:00 AM |
|
Awesome! Im ready for Canadian Group Buy! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
██ Please support sidehack with his new miner project Send to :
1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
|
|
|
OgNasty
Donator
Legendary
Offline
Activity: 4858
Merit: 4595
Leading Crypto Sports Betting & Casino Platform
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 19, 2016, 06:00:29 PM |
|
Good luck sidehack! Do your thing. Thanks for the info.
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
philipma1957
Legendary
Online
Activity: 4242
Merit: 8494
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2016, 12:41:11 AM |
|
would be nice to see something happen good for a change. I am tired of getting repairs for my s9s.
Sidehack could you check the bids out there is a question I asked on that thread.
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 23, 2016, 06:07:22 AM |
|
would be nice to see something happen good for a change. I am tired of getting repairs for my s9s.
Sidehack could you check the bids out there is a question I asked on that thread.
My sentiments as well. I want to put my financial support and purchase from the community rather than a bloated giant that squeezes the market from all angles to make the consumer basically as non profitable and competitive as possible. I am so in for this development. If there's some way I can lend a hand, I would/will.
|
|
|
|
elokk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 23, 2016, 11:31:29 AM |
|
would be nice to see something happen good for a change. I am tired of getting repairs for my s9s.
Sidehack could you check the bids out there is a question I asked on that thread.
My sentiments as well. I want to put my financial support and purchase from the community rather than a bloated giant that squeezes the market from all angles to make the consumer basically as non profitable and competitive as possible. I am so in for this development. If there's some way I can lend a hand, I would/will. You can help by bidding on some of this gear: https://bitcointalk.org/index.php?topic=1652091.msg16598805
|
t.me/bitcoinasic
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2016, 02:53:04 PM |
|
So I finished up the power and basic layout of a new Bitfury-based Compac and handed it off to Novak to add controls. Looks like he's become a lot busier than expected and I haven't heard anything in a while. The suck part of the stickminer is interfacing to the chip directly, as it uses a quasi-SPI comm with multiplexing and weird voltage levels so there'd be a lot of bit-banging.
I plan to focus on the pod miner, which shouldn't take much hardware dev since the power system has already been messed with a lot in previous versions. Bitfury has their 250nm comm multiplexer chip that takes in pretty much stock-standard SPI and handles all the chip-level comms by itself, so the microcontroller programming end shouldn't be too difficult. That's handy because I'm out of practice on embedded, but I have been getting back into it with various projects the last few months.
So my focus for the next week, when I'm not required for manufacturing, will be to work on the layout for the pod miner and get some sample PCBs sent out for testing.
Here's what I'm hoping for out of the pod miner. It's got a practical power-draw upperbound of 70 to 80 watts, probably more like 50W in normal use. Board dimensions 8x12cm, the chip field will mount up an 80mm fan and heatsink. Power in from a barrel jack or PCIe, signal from USB B or mini. The hardware will include temperature sensing, dynamic voltage control, fan speed control and I'd like to see an input power monitor. An automatic autotune would have to be implemented in the driver (which is not my job) but if we had a reading of input power you'd be able to specify how much heat you could afford (like if you had a 12V 4A brick you could tell it not to exceed 40W draw or something) and it'd dial up the frequency (and fans if necessary) until the overall power draw was maintained at your desired level, kinda like Spondoolies did with their PSU limits.
Once this is done, it should be fairly trivial to extend everything to a larger board. I know someone's already putting out an S5-compatible board, or at least claims to be, but I'm gonna keep working on mine because I think it'll be better. In any case theirs is lacking some features I really want to see, and judging by the 3x power jacks it's going to run hot and loud (possibly incompatible with S1 open-chassis single fan) and won't be compatible with S3 housings at all, so probably not a universal upgrade or necessarily good for at home.
Also, regarding the auction, we brought in some decent money so thanks everyone because it'll really help get this project going. We also got 0.66BTC for vh for all the driver work he did on the failed BW stick project, so that's pretty cool.
|
|
|
|
gt_addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2016, 05:02:35 PM |
|
Glad to hear that the auctions did well and that you're planning to cram so much information into the new pod miner. Its been long overdue to have a miner that gives all the details/features you want.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2016, 05:10:52 PM |
|
Hopefully everything else cooperates and I actually get past prototyping. Right now I only have enough sample chips to build one; it'd be nice to get enough to make several and send them out for testing and review like I did with the BM1384 Compacs. It'd be really great if I could have 'em out in time for Christmas, but even if I had a working design now it'd be two weeks before I could build one and at least five weeks before production started.
|
|
|
|
|
gt_addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2016, 05:44:09 PM |
|
Hopefully everything else cooperates and I actually get past prototyping. Right now I only have enough sample chips to build one; it'd be nice to get enough to make several and send them out for testing and review like I did with the BM1384 Compacs. It'd be really great if I could have 'em out in time for Christmas, but even if I had a working design now it'd be two weeks before I could build one and at least five weeks before production started.
But it'll be worth the wait I'm sure. I'm trying to keep a lid on the excitement for the USB stick I won in the auction ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
spazzdla
Legendary
Offline
Activity: 1722
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2016, 02:08:35 AM |
|
This sounds perfect.
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2016, 02:52:48 AM |
|
Would anyone be terribly upset if I did not build a stickminer around this chip? Interfacing to the ASIC directly kinda sucks, and the minimum buck voltage is at the top end of what's likely the practical range for the chip.
It'd be better to use a proper interface chip, but that's kinda wasteful without multiple ASICs. Of course, multiple ASICs also adds to the cost. Doesn't double the cost of course. I don't know how much it'd add.
So, what's a general consensus - a two- or three-chip stickminer (for, say, nominally $35 or $40 versus the original Compac's $25) or no stickminer at all?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4242
Merit: 8494
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2016, 03:24:19 AM |
|
Would anyone be terribly upset if I did not build a stickminer around this chip? Interfacing to the ASIC directly kinda sucks, and the minimum buck voltage is at the top end of what's likely the practical range for the chip.
It'd be better to use a proper interface chip, but that's kinda wasteful without multiple ASICs. Of course, multiple ASICs also adds to the cost. Doesn't double the cost of course. I don't know how much it'd add.
So, what's a general consensus - a two- or three-chip stickminer (for, say, nominally $35 or $40 versus the original Compac's $25) or no stickminer at all?
2-3 chip miner built as usb form factor sounds good. hash range would be 40 to 80gh?
|
|
|
|
scyth3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2016, 03:27:14 AM |
|
No stickminer. Build a 1000w miner.
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2016, 03:47:44 AM |
|
I don't have solid numbers for the chip yet, but if we assume 0.1J/GH and 5W you're looking at 100-150GH.
I will not build a 1000W miner.
|
|
|
|
scyth3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2016, 03:50:25 AM |
|
I don't have solid numbers for the chip yet, but if we assume 0.1J/GH and 5W you're looking at 100-150GH.
I will not build a 1000W miner.
Dam, I tried. ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2016, 04:06:32 AM |
|
Sorry, I'm just one guy and I've already discussed three distinct design projects for miners, on top of everything else I've got going on.
Now if I end up able to make the S1 refit boards, four of those on a C1 chassis would probably hit 1000W. Or pack 'em in a rack case and hub 'em together for like 2KW. You know, whatever. But a standalone 1000W miner is not on my list.
|
|
|
|
scyth3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2016, 04:20:58 AM |
|
Sorry, I'm just one guy and I've already discussed three distinct design projects for miners, on top of everything else I've got going on.
Now if I end up able to make the S1 refit boards, four of those on a C1 chassis would probably hit 1000W. Or pack 'em in a rack case and hub 'em together for like 2KW. You know, whatever. But a standalone 1000W miner is not on my list.
A S1 refit or any 250W board would be sweet.
|
|
|
|
|