MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
November 02, 2016, 05:20:07 PM |
|
eXtremal.
I have 2 rigs with the same name "Miner" I only see one on my address. That one is the one with 3 cards and shows 6 gpus for that rig now that I am using the new silent. OK, how or why can I not see the other miner or its sol hash with the same name. It has 2 gpu's and should show on pool with 4 gpu's running the new silent also.
Also for the only miner rig, its sol rate is accurate and does not include the 2nd pc named "Miner" sol hash
ok any suggestions? lol
Change worker name Hey I have tried that by replacing the "worker_name" with "7" yet it still wants to pick up the computer name. Am I doing something wrong? lol Also when I run both miners with the same name it kicks out the first one I have running and does not show its GPU count and my sol rate drops accordingly... really strange What am I doing wrong in changing the name in .conf file? anyone? probably something silly I am not seeing I also have this problem will post my config file in a sec, hopefully we can get it sorted. Ya if you figure it out post a snippet of what it looks like!
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
eXtremal (OP)
|
|
November 02, 2016, 05:24:15 PM |
|
Termie21bitcoinsWith this amount of blocks/day you need check balance on a more big time interval. MinermanNC# name = "worker_name"; Remove # it's comment.
|
|
|
|
doktor83
|
|
November 02, 2016, 05:26:35 PM |
|
eXtremal, so is your pool fee 1% or 4% ? 2,5, but soon will be reduced to 1% You should write that somewhere on your site so people know it
|
|
|
|
SEnergy
Member
Offline
Activity: 101
Merit: 10
|
|
November 02, 2016, 05:27:54 PM |
|
when I run the _silentarmy.exe version it crashes when connecting to the pool front-end without an error, what should I do? the default one works fine
|
|
|
|
21bitcoins
Newbie
Offline
Activity: 8
Merit: 0
|
|
November 02, 2016, 05:43:10 PM |
|
Termie21bitcoinsWith this amount of blocks/day you need check balance on a more big time interval. MinermanNC# name = "worker_name"; Remove # it's comment. Thanks eXtremal, ill wait it out and see what it produces over a 24hr period, also Removing the # fixed the problem with my config file
|
|
|
|
justin.ramos
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 02, 2016, 05:45:01 PM |
|
eXtremal, payouts aren't working.
|
|
|
|
eestimees
|
|
November 02, 2016, 05:47:29 PM Last edit: November 02, 2016, 06:05:48 PM by eestimees |
|
Can someone say what you did to get past this: Connecting to frontend: coinsforall.io:6668 ... ERROR: invalid hostname and/or port. ver 0.2.0 works like a charm, but trying to use 0.2.3 and same config file gives that error.. no other mining instances.. tried reboot.. still the same.. EDIT: somehow it started on one rig.. but is about 30% slower than two times 0.2.0 miner... (4 x R9 380)
|
— eestimees
|
|
|
ioglnx
Sr. Member
Offline
Activity: 574
Merit: 250
Fighting mob law and inquisition in this forum
|
|
November 02, 2016, 06:06:43 PM |
|
Connecting to frontend: coinsforall.io:6668 ... ERROR: invalid hostname and/or port.
Getting always this error with all your versions..somehow you never responds to that bug.
As stated 4-5times earlier if i use the zcashgpuclient.exe it works. So something is wrong with the parsing..or do i need to enter something different?
|
GTX 1080Ti rocks da house... seriously... this card is a beast³ Owning by now 18x GTX1080Ti :-D @serious love of efficiency
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
November 02, 2016, 06:08:06 PM |
|
Termie21bitcoinsWith this amount of blocks/day you need check balance on a more big time interval. MinermanNC# name = "worker_name"; Remove # it's comment. Thanks eXtremal, ill wait it out and see what it produces over a 24hr period, also Removing the # fixed the problem with my config file Ok which # one do I remove? No matter which one I remove, miner wont start ? lol LOOK You can give this machine a custom name # Computer name is used as default # name = "MinerFX"; # Platform: 1st, 2nd or 3rd # in the line?
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
21bitcoins
Newbie
Offline
Activity: 8
Merit: 0
|
|
November 02, 2016, 06:15:15 PM |
|
Termie21bitcoinsWith this amount of blocks/day you need check balance on a more big time interval. MinermanNC# name = "worker_name"; Remove # it's comment. Thanks eXtremal, ill wait it out and see what it produces over a 24hr period, also Removing the # fixed the problem with my config file Ok which # one do I remove? No matter which one I remove, miner wont start ? lol LOOK You can give this machine a custom name # Computer name is used as default # name = "MinerFX"; # Platform: 1st, 2nd or 3rd # in the line? ok so i guess it's reading like # name = "MinerFX"; # Platform: when it should read name = "MinerFX"; # Platform: does that make sense?
|
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
November 02, 2016, 06:28:59 PM |
|
Termie21bitcoinsWith this amount of blocks/day you need check balance on a more big time interval. MinermanNC# name = "worker_name"; Remove # it's comment. Thanks eXtremal, ill wait it out and see what it produces over a 24hr period, also Removing the # fixed the problem with my config file Ok which # one do I remove? No matter which one I remove, miner wont start ? lol LOOK You can give this machine a custom name # Computer name is used as default # name = "MinerFX"; # Platform: 1st, 2nd or 3rd # in the line? ok so i guess it's reading like # name = "MinerFX"; # Platform: when it should read name = "MinerFX"; # Platform: does that make sense? Hey Got it! lol I was trying to compensate a space for the removed # which it did not need. Ok, thx for the help! and yes what you posted made sense just one of those things
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
dlx
Member
Offline
Activity: 61
Merit: 10
|
|
November 02, 2016, 06:41:36 PM |
|
I have 5 PCs, win7, two R9-290X each with liquid cooling. Ancient drivers, 2.5 years old..
With 2.2, only simple client worked, giving me about 16 sols per card ~ 161 all ten. Run a lot cooler than scrypt algo (cgminer).
Now with 2.3, silent army works! I get 2 gpu indication per card, and gone up to 292 sols total!
81% + increase! Power increased also, but not at the scrypt levels.
It's the only miner working with my h/w - s/w.
I get payed normally. The later delays are normal, sinse the difficulty is increasing and also the time needed to find new block.
THANK YOU!
|
|
|
|
Termie
|
|
November 02, 2016, 07:08:40 PM |
|
This 0.2.3 is awesome! My single R9 290x raises from ~29 Sol to ~32 Sol My three R9 Nanos from ~32 Sol to almost 44 Sol, very cool! And if I watch the GPU's load/utilization ratios at Afterburner (ups and downs) - there is even more potential for an upcoming silentarmy version!
|
|
|
|
nasos091283
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 02, 2016, 07:12:51 PM |
|
Help me please! v.0.2.3 R9 390x 8gb RX 480 4gb win7 64 drivers 16.10.3
error:
prepare_adl success GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67B0&SUBSYS_04D71043&REV_80_4&80E 7924&0&0008A iBusNumber 1 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAd apterName AMD Radeon (TM) R9 390 Series ADL found more devices than opencl!There is possibly at least one GPU that doesn 't support OpenCLUse the gpu map feature to reliably map OpenCL to ADLGPU 1 iAda pterIndex 6 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_34131462&REV_C7_4&108ABD8A&0&00 E4A iBusNumber 3 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName Radeon (TM) RX 480 Graphics WARNING: Number of OpenCL and ADL devices did not match!Hardware monitoring may NOT match up with devices!found platform[0] name = 'AMD Accelerated Parallel Pro cessing' <info> found 2 devices Using device 0 as GPU 0 Using device 1 as GPU 1 OpenCL error: -42 at /build/xpmclient/src/opencl.cpp:162
and quit miner
|
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
November 02, 2016, 07:30:25 PM |
|
Help me please! v.0.2.3 R9 390x 8gb RX 480 4gb win7 64 drivers 16.10.3
error:
prepare_adl success GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67B0&SUBSYS_04D71043&REV_80_4&80E 7924&0&0008A iBusNumber 1 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAd apterName AMD Radeon (TM) R9 390 Series ADL found more devices than opencl!There is possibly at least one GPU that doesn 't support OpenCLUse the gpu map feature to reliably map OpenCL to ADLGPU 1 iAda pterIndex 6 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_34131462&REV_C7_4&108ABD8A&0&00 E4A iBusNumber 3 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName Radeon (TM) RX 480 Graphics WARNING: Number of OpenCL and ADL devices did not match!Hardware monitoring may NOT match up with devices!found platform[0] name = 'AMD Accelerated Parallel Pro cessing'
<info> found 2 devices Using device 0 as GPU 0 Using device 1 as GPU 1 OpenCL error: -42 at /build/xpmclient/src/opencl.cpp:162
and quit miner
Have you looked in your device manager to be sure both cards are showing under display tab? and if so, check the driver dates etc. I'm sure you have, but just throwing it out there. You may want to reinstall drivers. Also delete the "bin" files created in the miner, close it and reboot your pc and try to launch again. I run both of those cards but on different rigs... no issues with the 16.10 drivers
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
isamamin
Sr. Member
Offline
Activity: 263
Merit: 250
semux
|
|
November 02, 2016, 07:32:55 PM |
|
new Tx guys, plz keep mining a359451cc248dd649e04f98e80bc37e25e0941e4da3b3a8141fc65258d82e1ee 2016-11-02 21:54:57 0.01086474 ZCASH
|
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
November 02, 2016, 07:38:55 PM |
|
I finally feel like my life is returning to normal! lol I got 2 more payments back to back, all my miners are running stable with the new kernel, the pool is really coming to life AND we are finding blocks! Lets kick some ass now on this pool and mine some zca$h What a stressful last 10 days.... learning and installing all that virtualbox, Ubuntu.... and now I don't use it lol Life is good Thank you for all your hard work eXtremal! and being patient with all of us as well.
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
BitLeafClover
Member
Offline
Activity: 98
Merit: 10
|
|
November 02, 2016, 07:47:48 PM |
|
@extremal bro this time im gonna ask polite http://coinsforall.io/#!/coin/ZCASH/wallet/zcgMMNEA1maTT3j7wzo3tWDMmQc2ZQWRWznjXt7VtPQJoR2fjkFw7Q6dJZaRbUMozXnHH7egNW2F8mtRNfQTguGtPUBLgNs what should i do to get my 0.0091 ? please advise, im really getting anoyed, i never got any payment can you just send me to my polo t addy? wallet.dat with this address to email please and your new T-address. I've PMed and posted on here about the same process - I need to transfer my Z address funds to a T address. Can you please confirm this and I will email you the wallet.dat + the T Address? Thank you kindly
|
|
|
|
eXtremal (OP)
|
|
November 02, 2016, 07:54:09 PM |
|
If I don't transfer your Z to T in 12 hours email again please, too many emails...
|
|
|
|
krjalone
Member
Offline
Activity: 87
Merit: 11
|
|
November 02, 2016, 07:58:18 PM |
|
Pool is working mutch more stable now and your new miner version was awesome too. Thanks for your hard work eXtremal.
|
|
|
|
|