Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480)

[MinermanNC]

eXtremal.

I have 2 rigs with the same name "Miner" I only see one on my address. That one is the one with 3 cards and shows 6 gpus for that rig now that I am using the new silent. OK, how or why can I not see the other miner or its sol hash with the same name. It has 2 gpu's and should show on pool with 4 gpu's running the new silent also.

Also for the only miner rig, its sol rate is accurate and does not include the 2nd pc named "Miner" sol hash

ok any suggestions?  lol

Change worker name

Hey I have tried that by replacing the "worker_name" with "7" yet it still wants to pick up the computer name.

Am I doing something wrong? lol

Also when I run both miners with the same name it kicks out the first one I have running and does not show its GPU count and my sol rate drops accordingly... really strange

What am I doing wrong in changing the name in .conf file? anyone? probably something silly I am not seeing  

I also have this problem 
will post my config file in a sec, hopefully we can get it sorted.

Ya if you figure it out post a snippet of what it looks like! 

[eXtremal]

Termie
21bitcoins
With this amount of blocks/day you need check balance on a more big time interval.

MinermanNC

# name = "worker_name";

Remove # it's comment.

[doktor83]

eXtremal, so is your pool fee 1% or 4% ?

2,5, but soon will be reduced to 1%

You should write that somewhere on your site so people know it

[SEnergy]

when I run the _silentarmy.exe version it crashes when connecting to the pool front-end without an error, what should I do? the default one works fine

[21bitcoins]

Termie
21bitcoins
With this amount of blocks/day you need check balance on a more big time interval.

MinermanNC

# name = "worker_name";

Remove # it's comment.

Thanks eXtremal, ill wait it out and see what it produces over a 24hr period, also Removing the # fixed the problem with my config file 

[justin.ramos]

eXtremal, payouts aren't working.

[eestimees]

Can someone say what you did to get past this:

Code:

Connecting to frontend: coinsforall.io:6668 ...
ERROR: invalid hostname and/or port.

         
ver 0.2.0  works like a charm, but trying to use 0.2.3 and same config file gives that error.. no other mining instances.. tried reboot.. still the same..

EDIT: somehow it started on one rig.. but is about 30% slower than two times 0.2.0 miner... (4 x R9 380)

[ioglnx]

Connecting to frontend: coinsforall.io:6668 ...
ERROR: invalid hostname and/or port.

Getting always this error with all your versions..somehow you never responds to that bug.

As stated 4-5times earlier if i use the zcashgpuclient.exe it works. So something is wrong with the parsing..or do i need to enter something different?

[MinermanNC]

Termie
21bitcoins
With this amount of blocks/day you need check balance on a more big time interval.

MinermanNC

# name = "worker_name";

Remove # it's comment.

Thanks eXtremal, ill wait it out and see what it produces over a 24hr period, also Removing the # fixed the problem with my config file 

Ok which # one do I remove? No matter which one I remove, miner wont start ? lol LOOK

You can give this machine a custom name# Computer name is used as default# name = "MinerFX";# Platform:

1st, 2nd or 3rd # in the line?

[21bitcoins]

Termie
21bitcoins
With this amount of blocks/day you need check balance on a more big time interval.

MinermanNC

# name = "worker_name";

Remove # it's comment.

Thanks eXtremal, ill wait it out and see what it produces over a 24hr period, also Removing the # fixed the problem with my config file  

Ok which # one do I remove? No matter which one I remove, miner wont start ? lol LOOK

You can give this machine a custom name# Computer name is used as default# name = "MinerFX";# Platform:

1st, 2nd or 3rd # in the line?

ok so i guess it's reading like # name = "MinerFX";# Platform:
when it should read  name = "MinerFX";# Platform:

does that make sense?

[MinermanNC]

Termie
21bitcoins
With this amount of blocks/day you need check balance on a more big time interval.

MinermanNC

# name = "worker_name";

Remove # it's comment.

Thanks eXtremal, ill wait it out and see what it produces over a 24hr period, also Removing the # fixed the problem with my config file  

Ok which # one do I remove? No matter which one I remove, miner wont start ? lol LOOK

You can give this machine a custom name# Computer name is used as default# name = "MinerFX";# Platform:

1st, 2nd or 3rd # in the line?

ok so i guess it's reading like # name = "MinerFX";# Platform:
when it should read  name = "MinerFX";# Platform:

does that make sense?

Hey Got it! lol I was trying to compensate a space for the removed # which it did not need.

Ok, thx for the help!  and yes what you posted made sense  just one of those things

[dlx]

I have 5 PCs, win7, two R9-290X each with liquid cooling. Ancient drivers, 2.5 years old..

With 2.2, only simple client worked, giving me about 16 sols per card ~ 161 all ten.  Run a lot cooler than scrypt algo (cgminer).

Now with 2.3, silent army works!  I get 2 gpu indication per card, and gone up to 292 sols total!

81% + increase!   Power increased also, but not at the scrypt levels.

It's the only miner working with my h/w - s/w.

I get payed normally.  The later delays are normal, sinse the difficulty is increasing and also the time needed to find new block.

THANK YOU!

[Termie]

This 0.2.3 is awesome!
My single R9 290x raises from ~29 Sol to ~32 Sol
My three R9 Nanos from ~32 Sol to almost 44 Sol, very cool!

And if I watch the GPU's load/utilization ratios at Afterburner (ups and downs) - there is even more potential for an upcoming silentarmy version!

[nasos091283]

Help me please!
v.0.2.3
R9 390x 8gb
RX 480 4gb
win7 64
drivers 16.10.3

error:

prepare_adl success
GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67B0&SUBSYS_04D71043&REV_80_4&80E
7924&0&0008A iBusNumber 1 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAd
apterName  AMD Radeon (TM) R9 390 Series
ADL found more devices than opencl!There is possibly at least one GPU that doesn
't support OpenCLUse the gpu map feature to reliably map OpenCL to ADLGPU 1 iAda
pterIndex 6 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_34131462&REV_C7_4&108ABD8A&0&00
E4A iBusNumber 3 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName
  Radeon (TM) RX 480 Graphics
WARNING: Number of OpenCL and ADL devices did not match!Hardware monitoring may
NOT match up with devices!found platform[0] name = 'AMD Accelerated Parallel Pro
cessing'
<info> found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
OpenCL error: -42 at /build/xpmclient/src/opencl.cpp:162

and quit miner

[MinermanNC]

Help me please!
v.0.2.3
R9 390x 8gb
RX 480 4gb
win7 64
drivers 16.10.3

error:

prepare_adl success
GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67B0&SUBSYS_04D71043&REV_80_4&80E
7924&0&0008A iBusNumber 1 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAd
apterName  AMD Radeon (TM) R9 390 Series
ADL found more devices than opencl!There is possibly at least one GPU that doesn
't support OpenCLUse the gpu map feature to reliably map OpenCL to ADLGPU 1 iAda
pterIndex 6 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_34131462&REV_C7_4&108ABD8A&0&00
E4A iBusNumber 3 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName
  Radeon (TM) RX 480 Graphics
WARNING: Number of OpenCL and ADL devices did not match!Hardware monitoring may
NOT match up with devices!found platform[0] name = 'AMD Accelerated Parallel Pro
cessing'

<info> found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
OpenCL error: -42 at /build/xpmclient/src/opencl.cpp:162

and quit miner

Have you looked in your device manager to be sure both cards are showing under display tab? and if so, check the driver dates etc.  I'm sure you have, but just throwing it out there.

You may want to reinstall drivers. Also delete the "bin" files created in the miner, close it and reboot your pc and try to launch again. I run both of those cards but on different rigs... no issues with the 16.10 drivers 

[isamamin]

new Tx guys, plz keep mining
a359451cc248dd649e04f98e80bc37e25e0941e4da3b3a8141fc65258d82e1ee   2016-11-02 21:54:57   0.01086474 ZCASH

[MinermanNC]

I finally feel like my life is returning to normal! lol 

I got 2 more payments back to back, all my miners are running stable with the new kernel, the pool is really coming to life AND we are finding blocks!

Lets kick some ass now on this pool and mine some zca$h 

What a stressful last 10 days.... learning and installing all that virtualbox, Ubuntu.... and now I don't use it lol

Life is good 

Thank you for all your hard work eXtremal! and being patient with all of us as well.

[BitLeafClover]

@extremal

bro this time im gonna ask polite

http://coinsforall.io/#!/coin/ZCASH/wallet/zcgMMNEA1maTT3j7wzo3tWDMmQc2ZQWRWznjXt7VtPQJoR2fjkFw7Q6dJZaRbUMozXnHH7egNW2F8mtRNfQTguGtPUBLgNs

what should i do to get my 0.0091 ?

please advise, im really getting anoyed, i never got any payment

can you just send me to my polo t addy?

wallet.dat with this address to email please and your new T-address.

I've PMed and posted on here about the same process - I need to transfer my Z address funds to a T address. Can you please confirm this and I will email you the wallet.dat + the T Address?
Thank you kindly

[eXtremal]

If I don't transfer your Z to T in 12 hours email again please, too many emails...

[krjalone]

Pool is working mutch more stable now and your new miner version was awesome too.   Thanks for your hard work eXtremal.