Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[gennadiv]

incredibly but r 9 380 speed has increased many times
ZEC - Total Speed: 215.988 H/s, Total Shares: 457, Rejected: 2, Time: 04:16
ZEC: GPU0 74.956 H/s, GPU1 73.979 H/s, GPU2 67.053 H/s

[1714853899]

1714853899

[disodium]

V5.0 fixed "GPU returned incorrect data" on the card connected to monitor on my 290/280 rig. Good.

[IOTUSA]

Awesome work again Claymore.

I'm getting 130~140 sol/s across all 9 RX480.

4 of my 290x average about 125 sol/sm, touching 130 sol/s. 3 others give over 130 sol/s, sometimes touch 140 sol/s. Consistent performance difference between the 4 and the 3 at identical clock speeds. All 7 cards have 390x memory controller BIOS mod, the 3 faster cards just all happen to have Hynix RAM and the other 4 Elpida RAM. I was having this same performance difference on older Claymore versions and SilentArmy too. Even though I have tightened the Elpida timings a lot. Can only guess something about the Elpida RAM cards is holding them back. Something other than just plain memory straps

Hi For RX480 what mod are you using besides straps ? Whats your power consumption?
Your results look great.
I have 6 MSI RX480 4G gaming x (hynix) and 7 RX480 reference 8G (Elpida)

No need to mod, I get at 130 to 140 on AMD 480-8gb using these settings:
Core clock - 1350
Core volt - 1135
Mem clock - 2200
Mem volt - 1100

Set target fan speed to max and target temp to 70C.

Still stable enough for gaming.

I am seeing 130 stable on an old 290 stock.

[somestranger]

Wow loving the 5.0 release; my solution rate more than doubled!!!

My miner with 6x RX 480 4GB + 1 8GB and Celeron 1840 CPU went from 330-450 Sol/s (very inconsistent, likely due to maxed out CPU) to 800-850 sol/s and only 20% CPU usage.

[CoinPro69]

Latest version v5.0:

- improved speed by about 30-50% (depends on card model). About 145H/s on stock 390X.
- improved support for Catalyst 16.x and 4xx cards.
- reduced CPU usage.


WTF BRO!! NICE!
ZEC will be outmined now!
You killed it xD

Let the investors raise the Zec Course


@ Claymore, can't you improve eth as well with those methods you just used here?
Maybe even get some optimization with machine learning as well, huh?
I really hope, you don't just fool us with fake numbers.. but I believe you are not cheating us, aren't you?

The new version seems just amazing, 3x the output now at what was at first avaiable! Great Job!
However, 3x less reward at least :p

Thx for giving us those unbelievable and exciting results anyway

[Meech]

Is v5.0 available for linux?

optiminer matches (or exceeds) Claymore's (win) speed on Linux.

Yes but at 15% fee.  Not knocking it just include all the facts.

Just so you know the fee is already included with the hash rates you get.

Optiminer parallel mines for the dev so the hash rates you see are what you get pool side, so the fee isn't relevant.  Claymore quits it's current job and mines for the dev, so it different.

So if that's even possible why isn't it implemented to dual mine another crypto?  I think you guys are just taking a fancy to that lad.  We can't assume everything they tell us is what it is simply because we can't look for the answer.

[Shurikenix]

https://s21.postimg.org/3lnc6us93/image.jpg
What is it? I have only 6 cards in my rig. And Claymore, please make gpu order in your miners as in HWInfo, please. The order is shuffle now. I wrote this to you in PM.

[arielbit]

my fury has the biggest gain hittiing 180 H/s..maybe its the HBM memory, imagine when HBM2 is released with the rx 490, that gpu will probably outclass the rx 480 and HBM cards by a huge margin.

[maxmad_x]

What is it? I have only 6 cards in my rig. And Claymore, please make gpu order in your miners as in HWInfo, please. The order is shuffle now. I wrote this to you in PM.

DEcrease overclocking.. your card is hanging.

[dester]

Hi. Many thanks for a job well done!
But what happened and how to fix it?
in the latest version 5 all my video show 380x - 0 sols. And it is not even loaded completely. Driver tested 16.11.3, 16.9.2
What could be the problem?

update.
480 and 380 do not work if run in a single window
If you run two separate windows. it works
but writes that long busy and asks you to specify a different port
Whether it is possible to fix?

[nerdralph]

Anyone have some good settings for r9 290/x? getting about 120h/s on v5 with 1100/1250 and custom eth rom

That seems low.  I have a reference R9 290X flashed with a Stilt BIOS and get 150 with optiminer.  Clock is 1000/1250.

[MacT]

 THANK YOU Claymore

 new version is using 10% less power

 v4.  556 watts 130 sol stock 2x380 strix + 7950 vaporx

 v5.  500 watts 178 sol stock 2x380 strix + 7950 vaporx

[adamvp]

Can we run two instances of Claymore miner? One for rx 4xx series, second for old cards?

[Tmdz]

Can we run two instances of Claymore miner? One for rx 4xx series, second for old cards?

Yes just copy the miner to a new folder with correct parameters, that is what I do.

[Taiga]

this problem was in old version and now. Claymore?!

[snakey]

Any good settings for RX470 8GB OC Sapphire?

[Bananana]

Claymore, I love you!!!! Best miner ever...

[SolarRunner]

Hi. Many thanks for a job well done!
But what happened and how to fix it?
in the latest version 5 all my video show 380x - 0 sols. And it is not even loaded completely. Driver tested 16.11.3, 16.9.2
What could be the problem?

update.
480 and 380 do not work if run in a single window
If you run two separate windows. it works
but writes that long busy and asks you to specify a different port
Whether it is possible to fix?

Same problem

rig 480/480/470/380x

380x - 0 sol
if 380 run single - work fine, but if run 2 miners 1 - 480/480/470 and 2 - 380 drop speed on both miner by 20-30% (

[powerstr]

- id 1,2,3,4

[justinjja]

Wow Claymore nice work, V5 is really great.
Getting 700 sol/s on my 6x Overclocked RX 480 rigs now.