[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[sambiohazard]

Well this is nice on myr-groestl:

[2014-05-02 21:15:39] accepted: 17/17 (100.00%), 6042 khash/s (yay!!!)

For a 750ti with just a basic command line I'm pretty freaking stoked...suggest I stick with myr or go for something else?

I would suggest to keep mining and holding it as there is lot of talks about MYR going to brazil and all. If this is hype price will go up if not price will go up even more.

[nomad1109]

Anyone ever had a single card that won't play nice with a particular algorithm all of a sudden?

I mined with all 6x 750ti cards for 4 days on Jackpotcoin before block 6000, and now with the new ccminer0.7 version and the fixes with the hard fork I cannot get my #3 card to not crash seemingly no matter what I do.

I have tried all the settings in OC from -everything, to 0, to + maximum and everything in between, and with the Mem settings as well from -502, to 0, all the way up to the +600 that runs just fine on all the identical cards I have in the rig.

Weirdest part is that all 6 cards will mine just fine on Groestlcoin, no matter what I OC the card to + or - it runs like a top at full speed with zero problems. Also using the new ccminer0.7.

If I disable that card in the config and run just the other 5 cards there are no crashing problems at all either.

I am just about all out of ideas on this one... but it is keeping me planted on Groestlecoin (not that it is a bad thing right now, but I would love to mine Jackpot for even the chance at the big prize!).

Thanks for any input anyone may have on why I have a possessed card that hates anything but Groestle at the moment.

[cayars]

If it were me I'd try moving the card to the inside #1 spot where it will probably run coolest (depending on your setup).  Don't know if this will make any difference but instead of being in the middle of the other cards it will be on the outside getting probably the most air.  Would help to rule out if it's a thermal type problem.  IE see if problem follows card or follows slot.

Carlo

[liomojo1]

Anyone ever had a single card that won't play nice with a particular algorithm all of a sudden?

I mined with all 6x 750ti cards for 4 days on Jackpotcoin before block 6000, and now with the new ccminer0.7 version and the fixes with the hard fork I cannot get my #3 card to not crash seemingly no matter what I do.

I have tried all the settings in OC from -everything, to 0, to + maximum and everything in between, and with the Mem settings as well from -502, to 0, all the way up to the +600 that runs just fine on all the identical cards I have in the rig.

Weirdest part is that all 6 cards will mine just fine on Groestlcoin, no matter what I OC the card to + or - it runs like a top at full speed with zero problems. Also using the new ccminer0.7.

If I disable that card in the config and run just the other 5 cards there are no crashing problems at all either.

I am just about all out of ideas on this one... but it is keeping me planted on Groestlecoin (not that it is a bad thing right now, but I would love to mine Jackpot for even the chance at the big prize!).

Thanks for any input anyone may have on why I have a possessed card that hates anything but Groestle at the moment.

If you mine scrypt or scryptN do you have the same  problem?

[liomojo1]

Minig jackpotcoin with my single ti 750 which is on the board gives me 3050khs , but my 6xti750 on risers give me each 2750-2800khs with the same clocks 1365mhz core. Runnig two  ccminer don`t make any good , just tripples the cpu usage. Anyone can confirm? The systems burns 310w at the wall.

[see360]

   C&C Hash Factory

[DougB62]

   C&C Hash Factory

 

[sambiohazard]

@cbuchner1
please give me your GRS address so that I can send you liomojo1's share of GRS.

@liomojo1
you can still give me an address as I am mining some MYR for christian.

[liomojo1]

Thanks but send them to him . He made all this happened.

[Tyr808]

Minig jackpotcoin with my single ti 750 which is on the board gives me 3050khs , but my 6xti750 on risers give me each 2750-2800khs with the same clocks 1365mhz core. Runnig two  ccminer don`t make any good , just tripples the cpu usage. Anyone can confirm? The systems burns 310w at the wall.

What's your setup like? With my 750ti MSI oc edition and over clocked like crazy I can barely break 2900 and this is on the motherboard to. (Running windows 7 by the way)

This is with the 0.7 ccminer50.exe windows release, so unfortunately only 32 bit

I keep seeing people talking about getting 3mh+ on stock clocks. I'll only pull 2.6-2.7 at stock. Wondering where I've done something wrong.

[cbuchner1]

@cbuchner1
please give me your GRS address so that I can send you liomojo1's share of GRS.

here's a GRS address thank you

FcPdoV3QQbrAHiPs9M9XXAxT2Bv4SzB7PQ

[Chris84]

https://i.imgur.com/FXyeiRk.gif   C&C Hash Factory

nice

[liomojo1]

Minig jackpotcoin with my single ti 750 which is on the board gives me 3050khs , but my 6xti750 on risers give me each 2750-2800khs with the same clocks 1365mhz core. Runnig two  ccminer don`t make any good , just tripples the cpu usage. Anyone can confirm? The systems burns 310w at the wall.

What's your setup like? With my 750ti MSI oc edition and over clocked like crazy I can barely break 2900 and this is on the motherboard to. (Running windows 7 by the way)

This is with the 0.7 ccminer50.exe windows release, so unfortunately only 32 bit

I keep seeing people talking about getting 3mh+ on stock clocks. I'll only pull 2.6-2.7 at stock. Wondering where I've done something wrong.

It is i7 920 cpu and 750ti on x16 pci-e . Core clock 1369mhz and mem clock 2150mhz. Using ccminer50.exe x86 on ccminer v07. Windows 7 64bit.

[sambiohazard]

@cbuchner1
please give me your GRS address so that I can send you liomojo1's share of GRS.

here's a GRS address thank you

FcPdoV3QQbrAHiPs9M9XXAxT2Bv4SzB7PQ

Thanks for the address. I have sent it. this is 24 hours of mining on my new rig. Thanks for your hard work and enthusiasm.

[Tyr808]

Minig jackpotcoin with my single ti 750 which is on the board gives me 3050khs , but my 6xti750 on risers give me each 2750-2800khs with the same clocks 1365mhz core. Runnig two  ccminer don`t make any good , just tripples the cpu usage. Anyone can confirm? The systems burns 310w at the wall.

What's your setup like? With my 750ti MSI oc edition and over clocked like crazy I can barely break 2900 and this is on the motherboard to. (Running windows 7 by the way)

This is with the 0.7 ccminer50.exe windows release, so unfortunately only 32 bit

I keep seeing people talking about getting 3mh+ on stock clocks. I'll only pull 2.6-2.7 at stock. Wondering where I've done something wrong.

It is i7 920 cpu and 750ti on x16 pci-e . Core clock 1369mhz and mem clock 2150mhz. Using ccminer50.exe x86 on ccminer v07. Windows 7 64bit.

Ah. Must be the CPU helping. My 750ti rig was only built for one GPU, and needed to be low cost so I just went with the new, but cheap Pentium haswell.

[AizenSou]

@cbuchner1
please give me your GRS address so that I can send you liomojo1's share of GRS.

here's a GRS address thank you

FcPdoV3QQbrAHiPs9M9XXAxT2Bv4SzB7PQ

Hi Christian,

Nice to see you here @ Saturday too. Did you mine Futurecoin now or still solomine Jackpot? With the diff now it is not easy to find block even with your monster hash right? Why don't you try http://jackpotcoin.miningpoolhub.com. They promise that the jackpot finder will get 50% the jackpot and the others 50%.

Btw, any chance of implementing jackpot for old Fermi cards? And could you give a short explanation why the hashrate of Jackpot fluctuates so much with ccminer? It is because of the random round hashing?
Sorry for the noobs question.

Thanks in advance.

Regards,

[djm34]

Is there an updated version of hvc to use with mjollnircoin ?
Will it work with current hvc version ?
Or what can be done to fix it (looking into the code I guess first...  , I didn't tried yet that)

[bigjme]

Is that one without voting?

[djm34]

Is that one without voting?

yes

[bigjme]

You would need to rip apart ccminer and just remove everything to do with voting. I can look into it if you want?