[ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us

[Escher]

I know it's wrong timing with this question regarding pools are down etc, etc, but I think that under account/transaction list (bottom/down) I am missing transaction ID number. Transaction ID is missing also on the "all transactions" page (it is not all, the lists divided by type of coin - missing button "all coins" there). I need transaction IDs for making ticket toward Cryptsy, they are (again) messed up last 3 days...
Anyone knows where to find transaction IDs? Thx.

Same question, have 2 WDC payouts which were not deposited to Crypsy and 1 MEC which did not make it to my account at Coins-E. The WDC payouts were initiated at Dec 07 6:30 AM CST and Dec 07 6:01 PM CST while the MEC payout was sent at Dec 08 2:50 AM CST

Thanks!

[Escher]

I know it's wrong timing with this question regarding pools are down etc, etc, but I think that under account/transaction list (bottom/down) I am missing transaction ID number. Transaction ID is missing also on the "all transactions" page (it is not all, the lists divided by type of coin - missing button "all coins" there). I need transaction IDs for making ticket toward Cryptsy, they are (again) messed up last 3 days...
Anyone knows where to find transaction IDs? Thx.

Same question, have 2 WDC payouts which were not deposited to Crypsy and 1 MEC which did not make it to my account at Coins-E. The WDC payouts were initiated at Dec 07 6:30 AM CST and Dec 07 6:01 PM CST while the MEC payout was sent at Dec 08 2:50 AM CST

Thanks!

Follow up:

Shortly after my earlier post, the WDC transactions finally appeared in my Crypsy account ( as pending with over 4000 confirmations, but it does show that the issue was on Cryptsy's side with the deposit engine ). Still working with Coins-E on the MEC deposit, transaction IDs would be helpful for these issues in the future

[conspirosphere.tk]

i'd like an optional conversion of crapcoins in LTC or BTC by the pool (for a fee obviously, like switchercoin dot com allows), so that i don't have to receive those crapcoins in Crapsy and lose them.

[IsaacGoldbourne]

Site and pools are down for a few mins while I clean up the db and increase the minimum share diff to 32 across the board.

Hey, I completed the guides for you. They're just above your comment:)

I can't access them.  You need to host them somewhere else or email them to me.  Thanks though!

Sent

[Txslady]

Not sure why you decided to force everyone on scrypt to mine at 32.  I was using computers to mine with no fancy hardware and was having fun getting some low difficulty coins.  I enjoyed your pool but have had to move over to other pools that have lower difficulties.  Just a guess but you only want people that have the hardware to hash at high rates.  I get tired of people who no longer appreciate the small person that helped get their business where it is today.

Shannon

[STT]

Lower diff creates more traffic I think is one reason.   I think Ive read one solution which is selectable diff but the server alters it if the miner is sending too many shares, ie. its too low

[Cryptos2go]

Scrypt Multiport is down for me.

[mdude77]

Scrypt Multiport is down for me.

Working fine for me at the moment.  Looks like the EU one was working, the US one was down for a bit/while, but is up now.

M

[globeadue]

I have joined this pool and been trying to mine for a few weeks.
I love the idea but the pool just isn't working for me.
I have tried contacting the website a few times through their contact us link but no reply as of yet.
I am mining with
1x7970 scrypt
2x5830 scrypt
1xBFL Jalapeno

When mining against other pools, I have a very low stale/reject ratio always above 99.0%
The sha-256 miner seems to be horribly affected by this on multipool.
I have come home several days and found over a 50% reject rate. Needless to say I have moved the jala back to BTCGuild where I am getting after a full weekend of mining a 99.54% accept rate.
While my scrypt mining is still seeing alot of rejects, about 10-20% I haven't dived off just yet and gone back to wemineltc, but I'm getting ready to if I don't hear back from my support emails soon.

I've set the gpu miners all to difficulty 1 and the jala to 2 and tried various config settings but still see the stale/reject rates outside the norm. Btw - having a single forum thread as you support medium seems really bad idea. But since your page says this post is where to post, here it is.
Thoughts / ideas anyone?

[Pentel]

The BTC shares I had have gone, but my BTC total as not increased?
 

[flound1129]

Not sure why you decided to force everyone on scrypt to mine at 32.  I was using computers to mine with no fancy hardware and was having fun getting some low difficulty coins.  I enjoyed your pool but have had to move over to other pools that have lower difficulties.  Just a guess but you only want people that have the hardware to hash at high rates.  I get tired of people who no longer appreciate the small person that helped get their business where it is today.

Shannon

Share difficulty doesn't make a difference in profits over longer time periods.  It only affects short term variance.  64+ is the norm at the larger pools, 32 is still quite low.  I'm sorry you felt you had to leave.

[flound1129]

The BTC shares I had have gone, but my BTC total as not increased?
 

P2pool just found two blocks, you should have a payout incoming.

[flound1129]

I have joined this pool and been trying to mine for a few weeks.
I love the idea but the pool just isn't working for me.
I have tried contacting the website a few times through their contact us link but no reply as of yet.
I am mining with
1x7970 scrypt
2x5830 scrypt
1xBFL Jalapeno

When mining against other pools, I have a very low stale/reject ratio always above 99.0%
The sha-256 miner seems to be horribly affected by this on multipool.
I have come home several days and found over a 50% reject rate. Needless to say I have moved the jala back to BTCGuild where I am getting after a full weekend of mining a 99.54% accept rate.
While my scrypt mining is still seeing alot of rejects, about 10-20% I haven't dived off just yet and gone back to wemineltc, but I'm getting ready to if I don't hear back from my support emails soon.

I've set the gpu miners all to difficulty 1 and the jala to 2 and tried various config settings but still see the stale/reject rates outside the norm. Btw - having a single forum thread as you support medium seems really bad idea. But since your page says this post is where to post, here it is.
Thoughts / ideas anyone?

This thread is not the only support medium, there is another thread on cryptocointalk, an email address, and an IRC channel listed just below it.

I'm not sure why you're getting a lot of rejects, if you email me directly I can work on it with you.

You'll get 10-15% rejects on the BTC port no matter what, as it's the nature of p2pool (30 second sharechain blocks).  For the rest of the coins it should not be that high.

[flound1129]

I should add that the IRC channel has been very active lately and is probably the best place to go for help setting things up.

[Pentel]

BTC balance as now changed.  Take a bit of time, bit it changed.

[flound1129]

BTC balance as now changed.  Take a bit of time, bit it changed.

It's because new blocks are not scored until 5 confirmations, to help prevent orphans from making it into unconfirmed.

[fredeq]

Hello everyone,

I am back to mining with 3 280x. After 2 months break I started with multiport, had many problems with stability but thought they are connected with my hardware not pool itself.

After I ruled out everything that could be wrong with cgminer setup, network and gpu settings I switched to coinotron and stats remain the same but suddenly all my restart and hang problems dissapeared.
Then I tested WDC solo port and no problems as well. Few months back I had the same problem with middlecoin, everytime the pool switched coins there was a chance my whole pc will just crash into oblivion. But at that time multiport solved all my problems. Also wdc solo port reports strange 10min and 1min speed of 1,6khash and 4khash. All speed charts are off the scale for me, varying from 10khash to 40khash...

Bottomline:
Why is multiport causing my cgminer to crash and in some rare cases hang whole pc?
Whats wrong with 1min and 10min speeds when mining solo ports and whats wrong with speed charts overall?

Thanks for any help.

[chup]

Being spoiled  from ultrafast reaction/realisation by flound of TXID info - proposing/asking:
-I think e-mail notification of idle worker would raise average multipool hash capacity in some (small) percentage. Worth implementing? Thx.

[Lauda]

Is it possible to change the email address which you've used to register?

[flound1129]

Is it possible to change the email address which you've used to register?

yes, email me from the current address and request it.