Hacked Modified Memory Strap BIOS Database for ZEC MINING!

[Masked_Immortal]

I wonder is there anything for 280x with hynix BFR memory.
Seems no one done for those.

Just ask ... will always mod for you 

Download https://drive.google.com/open?id=0B6R3UoULhg3cbWYwVlYzNmUtSGc

Modded with straps from 1250MHz --> 1375MHz , 1500MHz  (1500MHz Should kick ass - ~80+ sols/sec)


p.s.1 - Flash with AtiFlash.exe from command prompt,  atiflash -f -p X rom_name.rom  , x = card number given by atiflash -i

p.s.2 - This is not some "Dirty hack" with timing tables from some totally other card, but timing table from same card's bios, for that specific memory (BFR).

b.r.
Brka

can i use on msi r9 280 (with out x)?

[1715637121]

1715637121

[1715637121]

1715637121

[asusx]

It seems many people are having issues modifying their straps with older GPUs using Hex Editor. I literally had about 50-60 PMs people BEGGING for me to modify their bios. I stopped doing it because it was time consuming. I will post the GPUs I currently have which I am using. I am getting very close to 90 Sol/s on each of my 7950 / 7970 / 280x using these straps with Claymore V4 using "-i 1". If you have a crappy CPU, you won't get 90 Sol/s, you might get between 75-80 Sol/s.


Just flash these straps at your own risk, if you have no idea what you are doing, then leave this thread now. I assume NO RESPONSIBILITY if you brick your GPU, messed up your memory chips, etc. YOU HAVE TO MAKE SURE YOU HAVE THE CORRECT MEMORY. ELPIDA WONT WORK WITH HYNIX STRAPS.


These straps are basically modified with these timings

20 4E 00 01 33 31 33 20 00 00 00 00 61 88 11 08 D0 54 07 04 0C 07 C1 00 00 21 60 00 22 AA 1C 00 02 00 14 20 8A 88 80 A1 00 00 01 20 03 02 06 07 09 08 0D 0B
40 9C 00 01 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 01 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
A0 86 01 01 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
1C 19 02 01 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
78 5D 02 01 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
10 98 02 01 77 71 33 20 00 00 00 00 8C C5 48 2F 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
30 E6 02 01 77 71 33 20 00 00 00 00 AD CD 49 2F 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
40 0D 03 01 77 71 33 20 00 00 00 00 CE 51 4A 2F 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14

All credit goes to

http://www.overclock.net/t/1554360/tahiti-memory-timings-patch-for-hynix-vram


I set the memory clock lower so you can increase into the higher straps if you aren't having stability problems.

The straps are

1375 MHz (1001-1375 MHz) - AFR 1000MHz Memory Timings, tight
1550 MHz (1376-1550 MHz) - AFR 1125MHz Memory Timings, tight
1700 MHz (1551-1700 MHz) - modified AFR 1250MHz Memory Timings by The Stilt, tight
1900 MHz (1701-1900 MHz) - modified AFR 1375MHz Memory Timings by The Stilt, tight

So start at 1400Mhz, if it works try 1575 and see which is better. Even try 1701 but I doubt it will be much faster.





ASUS R9 280X with HYNIX AFR memory

https://mega.nz/#!zwl1WDIa!kLFqZgCkMPiH1DOQe3Rg3FbQHpXZN-xq_CdmREBha04

Slight undervolt to 1.075V, 1070/1600.  
MSI Might say 1375 for mem but its 1600 since I didn't update the previous DPM field in VBE.




ASUS 7970 with HYNIX MFR memory

Slight undervolt. 1100/1400.
Try running at 1575 Mem, I had one GPU lock up at that mem freq so I am leaving it lower at 1400.

https://mega.nz/#!m08FhDgL!D_AhbYCZfPNZTzXct7vU6u-DJpEEb_8mLMc0OtJfBl8




GIGABYTE 7950 with HYNIX AFR Memory

Slight undervolt. 1000/1400.
Try running at 1100/1575.

https://mega.nz/#!L5N1kIzQ!Cabi7Cg_wO91jMzk9lKmsB5pfZXNKTggBjMetNgZrIQ




GIGABYTE 7970 with HYNIX AFR Memory

Slight undervolt. 1050/1400.
Try running at 1100/1575.

https://mega.nz/#!Do1GlbYb!-fohVnHB2Fk04BNDTmznQwGovXWBX7fd8ZmlVG9aaw0






Gigabyte 280x and Elpida EDW2032BBBG

https://mega.nz/#!qtsjFboJ!W31t7WMaDZWMso2pYJb6vKk154YsI8LtfQjnHqpNH9Y

hello sir


i would like to ask how to modded asus r9 280 ?

wat i have read, i cant flash 280 bios with 280x bios . both this is diffrent. do suggest me the method i need to use in order to flash my gpu

currently my gpu only get 45- 50 sol..

thanks

[oslak]

I wonder is there anything for 280x with hynix BFR memory.
Seems no one done for those.

Just ask ... will always mod for you 

Download https://drive.google.com/open?id=0B6R3UoULhg3cbWYwVlYzNmUtSGc

Modded with straps from 1250MHz --> 1375MHz , 1500MHz  (1500MHz Should kick ass - ~80+ sols/sec)


p.s.1 - Flash with AtiFlash.exe from command prompt,  atiflash -f -p X rom_name.rom  , x = card number given by atiflash -i

p.s.2 - This is not some "Dirty hack" with timing tables from some totally other card, but timing table from same card's bios, for that specific memory (BFR).

b.r.
Brka

How to know which strap is tight?

[amfofo]

http://www.guru3d.com/miraserver/images/2012/gbt-7970/IMG_5796.jpg

GIGABYTE 7970 with HYNIX AFR Memory

Slight undervolt. 1050/1400.
Try running at 1100/1575.

https://mega.nz/#!Do1GlbYb!-fohVnHB2Fk04BNDTmznQwGovXWBX7fd8ZmlVG9aaw0

can i use that on my sapphire r9-280x toxic?
my toxic has (H5GQ2H24AFR    hynix memory)

[spycheast]

http://www.guru3d.com/miraserver/images/2012/gbt-7970/IMG_5796.jpg

GIGABYTE 7970 with HYNIX AFR Memory

Slight undervolt. 1050/1400.
Try running at 1100/1575.

https://mega.nz/#!Do1GlbYb!-fohVnHB2Fk04BNDTmznQwGovXWBX7fd8ZmlVG9aaw0

can i use that on my sapphire r9-280x toxic?
my toxic has (H5GQ2H24AFR    hynix memory)

Better try first one, which is for
ASUS R9 280X with HYNIX AFR memory.

This one worked with my sapphire hd 7970 and is stable for more than 10 hrs

[Yerba]

Hi!
Took my ASUS R9 280X with hynix memory. Flashed this rom: ASUS R9 280X with HYNIX AFR memory
Now graphics driver 15.12 stops responding with Claymore v4.
Basically - what went wrong?

[asusx]

I got 1 of these. Its actually the fastest ZEC GPU I have. Faster than the 280x. It has Hynix MFR memory. No idea how it differs from the 7950 reference but its technically a 8950.

You should EASILY get 85 Sol/s with that GPU. Its actually the only 7950, that runs stable at 1100/1575.

this one is same with r9 280 right?

took this rom and flashed mine. i have r9 280 asus... after flash , nothing happen.. still remain same. 60 sol..


please help how u get 85 sol/s

[Xenoblate]

Hi!
Took my ASUS R9 280X with hynix memory. Flashed this rom: ASUS R9 280X with HYNIX AFR memory
Now graphics driver 15.12 stops responding with Claymore v4.
Basically - what went wrong?

Are you sure they are the same card? If you overclock before, try to reset to the default or lower clocks.

[Bojcha]

I wonder is there anything for 280x with hynix BFR memory.
Seems no one done for those.

Just ask ... will always mod for you  

Download https://drive.google.com/open?id=0B6R3UoULhg3cbWYwVlYzNmUtSGc

Modded with straps from 1250MHz --> 1375MHz , 1500MHz  (1500MHz Should kick ass - ~80+ sols/sec)


p.s.1 - Flash with AtiFlash.exe from command prompt,  atiflash -f -p X rom_name.rom  , x = card number given by atiflash -i

p.s.2 - This is not some "Dirty hack" with timing tables from some totally other card, but timing table from same card's bios, for that specific memory (BFR).

b.r.
Brka

Great but..
"Invalid Checksum"

-- fixed.

[Gaglam]

Alright I finally found a good ELPIDA timing strap. Use only 1500 Mhz. That Gigabyte 7970 finally gets 80 Sol/s using this, previously it was max 70 Sol/s

Put it inside your bios, I am too lazy to do any more Hex editing.

This has only 9 timings so make sure you include an extra dummy timing so the length of the file is the same.

20 4E 00 02 99 91 33 20 00 00 00 00 60 88 11 07 C0 52 0A 06 0F 09 91 00 00 20 41 00 22 AA 1C 00 15 00 14 20 9A 88 40 A1 00 00 00 00 03 01 05 07 08 0A 10 0C
40 9C 00 02 99 91 33 20 00 00 00 00 60 94 12 0F D0 52 0A 07 15 8D 32 01 00 20 41 00 22 AA 1C 00 1D 03 14 20 9A 88 80 A2 00 00 00 00 06 01 0A 0F 10 0E 16 0C
80 38 01 02 77 71 33 20 00 00 00 00 A5 AC 35 1F 30 53 09 0C 20 98 75 02 00 44 82 00 22 AA 1C 00 44 09 14 20 2A 89 00 A5 00 00 00 00 0C 06 14 1A 20 19 21 0F
90 5F 01 02 77 71 33 20 00 00 00 00 E7 B4 36 23 40 53 09 0D 24 9B C6 02 00 44 A2 00 22 AA 1C 00 4C 0B 14 20 2A 89 80 A5 00 00 00 00 0E 08 16 1C 24 1C 25 0F
A0 86 01 02 77 71 33 20 00 00 00 00 29 39 77 26 50 53 09 0E 26 1D 17 03 00 64 A2 00 22 AA 1C 00 54 0C 14 20 AA 89 00 A6 00 00 00 00 0F 0A 18 1D 27 1E 27 10
48 E8 01 02 77 71 33 20 00 00 00 00 AD 49 79 30 70 53 09 10 2D 23 E9 03 00 66 E3 00 22 AA 1C 00 64 0F 14 20 BA 89 80 A7 00 00 00 00 13 0E 1E 23 31 24 2E 11
F0 49 02 02 77 71 33 20 00 00 00 00 CE CD 59 39 80 55 11 11 2E 15 89 08 00 48 C6 00 22 33 9D 08 6C 00 14 20 6A 89 00 A0 02 00 31 20 14 0F 26 2B 88 25 2F 15
C4 7A 02 02 77 71 33 20 00 00 00 00 73 62 7C 3E B0 53 09 14 3A 2D 1C 05 00 69 26 01 22 AA 1C 00 04 06 14 20 EA 89 80 A9 03 00 03 00 19 14 26 2B 3F 2E 3B 13
98 AB 02 02 77 71 33 20 00 00 00 00 B5 6A 7D 43 C0 53 09 15 3E 30 7D 05 00 6A 27 01 22 AA 1C 00 0C 08 14 20 FA 89 40 AA 03 00 03 00 1B 16 29 2E 44 31 3F 13

Is this also good for my Club 3d r9 280x?
Elpida GD25Q10TCP

Regards

[JuanHungLo]

Here's an original ROM from a Sapphire HD 7970 3G OC w boost, Hynix AFR:

https://filetea.me/t1sPYG8i8RVRfue3wnGq2XLXg

If anyone can mod it for me I'd love to compare the two with TheStilt mods I have and report back to this thread.

[adaseb]

Is this also good for my Club 3d r9 280x?
Elpida GD25Q10TCP

Regards

Yes

Great but..
"Invalid Checksum"

Open and close in VBE7 and save.

this one is same with r9 280 right?

took this rom and flashed mine. i have r9 280 asus... after flash , nothing happen.. still remain same. 60 sol..


please help how u get 85 sol/s

No thats a Radeon 8950, won't work with your 280x.

Hi!
Took my ASUS R9 280X with hynix memory. Flashed this rom: ASUS R9 280X with HYNIX AFR memory
Now graphics driver 15.12 stops responding with Claymore v4.
Basically - what went wrong?

If you have the same card as in the photo it should of worked. Maybe try increasing the voltage in VBE7, since its undervolted. I run them headless.

hello sir


i would like to ask how to modded asus r9 280 ?

wat i have read, i cant flash 280 bios with 280x bios . both this is diffrent. do suggest me the method i need to use in order to flash my gpu

currently my gpu only get 45- 50 sol..

thanks

You will need someone to mod your 280 bios.  R9 280 and R9 280X are different GPUs.

[asusx]

hello sir


i would like to ask how to modded asus r9 280 ?

wat i have read, i cant flash 280 bios with 280x bios . both this is diffrent. do suggest me the method i need to use in order to flash my gpu

currently my gpu only get 45- 50 sol..

thanks

You will need someone to mod your 280 bios.  R9 280 and R9 280X are different GPUs.


[/quote]

hello sir..could u help me sir?

i tried and a few hours ago my card bricked...and i re-flash again and alive again...

[adaseb]

There is a guide here

http://club.dns-shop.ru/forum/?p=0&action=thread&id=123833#1271944

However I don;t have any straps for the 280, dont know if the 7970 280x ones will work. The card is a little different.

[asusx]

There is a guide here

http://club.dns-shop.ru/forum/?p=0&action=thread&id=123833#1271944

However I don;t have any straps for the 280, dont know if the 7970 280x ones will work. The card is a little different.

few hours ago, i tried to use 280x bios...but seems like not compatible. so....a google again and found 7950 is 280... so i try to use it...but finlly my gpu bricked.


so i reflash again....

https://drive.google.com/open?id=0B8mIxnX_aocKVXZTMzlUemJIa1k

this is asus r9 280 original bios setting

please help me sir..

[imunisasi]

rx 480 4gb bios
https://drive.google.com/file/d/0B8zkKK9h3vQeYWc3bG9WSFEtdi1BMjFUMkFqRGFkazFEbXBN/view?usp=sharing

can this one also ?

thanks

https://bitcointalk.org/index.php?topic=1584617.0

i already use eliovp 4gb for this one
thanks for both of u

[adaseb]

There is a guide here

http://club.dns-shop.ru/forum/?p=0&action=thread&id=123833#1271944

However I don;t have any straps for the 280, dont know if the 7970 280x ones will work. The card is a little different.

few hours ago, i tried to use 280x bios...but seems like not compatible. so....a google again and found 7950 is 280... so i try to use it...but finlly my gpu bricked.


so i reflash again....

https://drive.google.com/open?id=0B8mIxnX_aocKVXZTMzlUemJIa1k

this is asus r9 280 original bios setting

please help me sir..

Yes because you used a different bios. Backup your current BIOS, follow that Russian guide and modify your straps manually to the ones I posted in the main page.

[mr.bRxXx]

I wonder is there anything for 280x with hynix BFR memory.
Seems no one done for those.

Just ask ... will always mod for you  

Download https://drive.google.com/open?id=0B6R3UoULhg3cbWYwVlYzNmUtSGc

Modded with straps from 1250MHz --> 1375MHz , 1500MHz  (1500MHz Should kick ass - ~80+ sols/sec)


p.s.1 - Flash with AtiFlash.exe from command prompt,  atiflash -f -p X rom_name.rom  , x = card number given by atiflash -i

p.s.2 - This is not some "Dirty hack" with timing tables from some totally other card, but timing table from same card's bios, for that specific memory (BFR).

b.r.
Brka

Great but..
"Invalid Checksum"

-- fixed.

In fact, wrong checksum on memory timings doesnt matter,
So i force flash it with atiflash from command prompt.

P.s. i also have some msi 280x, didnt check which memory is inside,
But bios is larger than on older 280x/7970 (they put new serial flash ic in, its double the size),
Modding gave me some solid results, should be good for your card, too. (Sustained 80+ sols/s).

@others, dont flash this bios randomly. It's gonna brick your cards. It's only for mentioned msi card.

Have anice day.

B.r.
Brka

[fips1992]

I managed to get 74 sol of r9 280x elpida


https://drive.google.com/open?id=0B-wCF2Y5z10nTmk4LTZCVzItMXc

[Yerba]

Yes, the same ASUS as in Picture. With Hynix H5GQ2H24AFR memory.
I increased voltage via Afterburner 4.20.. did not helped.
Original ROM is here, please check it if You have time:
https://www.upload.ee/files/6342365/Originaal_ASUS_R9_280X.rom.html
Just wondering, what is wrong or different with my ASUS cards.. I have around 12 ASUS r9 280X cards.



Quote from: Yerba on Today at 10:38:22 AM

Hi!
Took my ASUS R9 280X with hynix memory. Flashed this rom: ASUS R9 280X with HYNIX AFR memory
Now graphics driver 15.12 stops responding with Claymore v4.
Basically - what went wrong? Smiley


If you have the same card as in the photo it should of worked. Maybe try increasing the voltage in VBE7, since its undervolted. I run them headless.