Litecoin Core 0.13.2 with SegWit released!

[losh11]

@shyliar in fact if he thinks he's the first pool to mine 0x2... blocks (with 0.13.2) he would be wrong.

Here's an analysis of the last 1321 blocks (since last retarget):

Code:

0x00000004             1207   91.37%
0x20000000             114    8.63%

Version 4 blocks (old) seem to take up 91% of the network. Other pools are in the middle of migrating...
F2Pool (approximately 45% of the network) are working on this, but expect F2Pool to spend some time to support...

[cryptohunter]

what's up with these pools and the LTC miners in general? everyone was crying there has been no new development and suddenly there is some development and nobody wants it although the features all look very useful.

Again the pools having all the say is stupid. I'll give dash it's due here (although its a scam coin) their voting system is a good idea.

[shyliar]

what's up with these pools and the LTC miners in general? everyone was crying there has been no new development and suddenly there is some development and nobody wants it although the features all look very useful.

Again the pools having all the say is stupid. I'll give dash it's due here (although its a scam coin) their voting system is a good idea.

Pools have until the 28th to change to latest version before signaling begins. I mine LTC and if the pool I mine at drags their butt on this update I'll be moving my hashrate elsewhere. Miners are highly invested in doing what is best for a coin. They don't own just a handful of coins. Even the small miners are invested in amounts of thousands and thousands of dollars. It's in the miners interest to do the right thing for a coin.

[jacobmayes94]

Our pool www.sparkpool.org has implemented segwit right off the bat, but awaiting miners...

[peekabootoo]

Our pool www.sparkpool.org has implemented segwit right off the bat, but awaiting miners...

www.litecoinpool.org has zero fees and pays out at  103pps

[freemanjackal]

i have running a full node with 0.13. everything fine so far.

I would like to make some tests, just for fun and test some ideas with cpu mining(i know it is not profitable).i have tried with bfgminer unsuccesfully,
i have set in litecoin.conf, running with litecoind
rpcuser=****
rpcpassword=*****
listen=1
server=1
rpcport=9332
rpcallowip=127.0.0.1
gen=0
daemon=1

bfgminer version 5.4, command ./bfgminer --scrypt -o http://127.0.0.1:9332 -u *** -p ***
it gives me an internal server error. Do i have to set up a pool for get up to work

Code:

 Initiate stratum failed
 [2017-07-11 10:48:19] Closing socket for stratum pool 0
 [2017-07-11 10:48:19] FAILED to retrieve work from pool 0 http://127.0.0.1:9332
 [2017-07-11 10:48:19] Pool 0 slow/down or URL or credentials invalid
 [2017-07-11 10:48:20] No servers were found that could be used to get work from.
 [2017-07-11 10:48:20] Please check the details from the list below of the servers you have input
 [2017-07-11 10:48:20] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
 [2017-07-11 10:48:20] Pool: 0  URL: http://127.0.0.1:9332  User: freeman  Password: superman
 [2017-07-11 10:48:20] Press any key to exit, or BFGMiner will try again in 15s.
 [2017-07-11 10:48:36] No servers were found that could be used to get work from.
 [2017-07-11 10:48:36] Please check the details from the list below of the servers you have input
 [2017-07-11 10:48:36] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
 [2017-07-11 10:48:36] Pool: 0  URL: http://127.0.0.1:9332  User: freeman  Password: superman
 [2017-07-11 10:48:36] Press any key to exit, or BFGMiner will try again in 15s.
 [2017-07-11 10:48:51] Testing pool http://127.0.0.1:9332
 [2017-07-11 10:48:51] HTTP request failed: The requested URL returned error: 500 Internal Server Error
 [2017-07-11 10:48:51] Failed to connect in json_rpc_call
 [2017-07-11 10:48:51] HTTP request failed: The requested URL returned error: 404 Not Found
 [2017-07-11 10:48:51] Failed to connect in json_rpc_call
 [2017-07-11 10:48:51] initiate_stratum with sockbuf=0x7fe53801d230
 [2017-07-11 10:48:51] Stratum connect failed with TLS to pool 0: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
 [2017-07-11 10:48:51] JSON decode failed(1): '[' or '{' expected near 'HTTP'
 [2017-07-11 10:48:51] Failed to resume stratum, trying afresh
 [2017-07-11 10:48:51] initiate_stratum with sockbuf=0x7fe53801d230
 [2017-07-11 10:48:51] Stratum connect failed with TLS to pool 0: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
 [2017-07-11 10:48:51] JSON decode failed(1): '[' or '{' expected near 'HTTP'
 [2017-07-11 10:48:51] Initiate stratum failed
 [2017-07-11 10:48:51] Closing socket for stratum pool 0
 [2017-07-11 10:48:51] FAILED to retrieve work from pool 0 http://127.0.0.1:9332
 [2017-07-11 10:48:51] Pool 0 slow/down or URL or credentials invalid
 [2017-07-11 10:48:52] No servers were found that could be used to get work from.
 [2017-07-11 10:48:52] Please check the details from the list below of the servers you have input
 [2017-07-11 10:48:52] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
 [2017-07-11 10:48:52] Pool: 0  URL: http://127.0.0.1:9332  User: freeman  Password: superman
 [2017-07-11 10:48:52] Press any key to exit, or BFGMiner will try again in 15s.
 [2017-07-11 10:49:08] No servers were found that could be used to get work from.
 [2017-07-11 10:49:08] Please check the details from the list below of the servers you have input
 [2017-07-11 10:49:08] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
 [2017-07-11 10:49:08] Pool: 0  URL: http://127.0.0.1:9332  User: freeman  Password: superman
 [2017-07-11 10:49:08] Press any key to exit, or BFGMiner will try again in 15s.
 [2017-07-11 10:49:23] Testing pool http://127.0.0.1:9332
 [2017-07-11 10:49:23] HTTP request failed: The requested URL returned error: 500 Internal Server Error
 [2017-07-11 10:49:23] Failed to connect in json_rpc_call
 [2017-07-11 10:49:23] HTTP request failed: The requested URL returned error: 404 Not Found
 [2017-07-11 10:49:23] Failed to connect in json_rpc_call
 [2017-07-11 10:49:23] initiate_stratum with sockbuf=0x7fe53801d230
 [2017-07-11 10:49:23] Stratum connect failed with TLS to pool 0: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
 [2017-07-11 10:49:23] JSON decode failed(1): '[' or '{' expected near 'HTTP'

any idea???