JimboToronto
Legendary
Offline
Activity: 4004
Merit: 4482
You're never too old to think young.
|
|
December 18, 2020, 08:17:57 PM |
|
$100k will be next summer at latest. Next December we'll reach $250-$450k. IMHO cards are ok as it's xmas time so why the hell not? I agree. Xmas cards it is. OK. No more cats (sorry Arrie)... no more gay (sorry Bob). Go Santa go.
|
|
|
|
|
|
|
|
Even in the event that an attacker gains more than 50% of the network's
computational power, only transactions sent by the attacker could be
reversed or double-spent. The network would not be destroyed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
LFC_Bitcoin
Legendary
Offline
Activity: 3528
Merit: 9556
#1 VIP Crypto Casino
|
That’s it, that’s the tweet........
|
|
|
|
jojo69
Legendary
Offline
Activity: 3164
Merit: 4345
diamond-handed zealot
|
|
December 18, 2020, 08:22:40 PM Merited by BobLawblaw (10) |
|
|
|
|
|
|
Torque
Legendary
Offline
Activity: 3556
Merit: 5041
|
|
December 18, 2020, 08:29:26 PM |
|
That’s it, that’s the tweet........ Actually if it unfolds anything like 2017 did, Bitcoiners will hate it too. Because there will be an unbelievable amount of FUD and misinformation going on. I just don't see how we get a rise year like 2017 was and have it all buttery smooth, bullish, and non-controversial all the way up. I would love to be dead wrong, of course.
|
|
|
|
Toxic2040
Legendary
Offline
Activity: 1792
Merit: 4141
|
1h 4h #stronghands
|
|
|
|
600watt
Legendary
Offline
Activity: 2338
Merit: 2106
|
|
December 18, 2020, 08:43:44 PM |
|
Poor him ? i dont know why my mind flash backed to summer 2017 Haha what a retard, I can't believe it... is that real? that is what i call a weak hand. on my first buy price crashed hard and did not recover for years. imagine this guy..
|
|
|
|
AlcoHoDL
Legendary
Offline
Activity: 2366
Merit: 4181
Addicted to HoDLing!
|
|
December 18, 2020, 08:47:40 PM |
|
I bought Anycubic's newer Mega S. Prusa's are in the same range, afaik even better quality at the higher ended printers and have also good community support. ....
The Anycubic is an excellent choice! I've used it and it's one of the best VFM 3D printers out there. You just need to be comfortable with tweaking and tinkering with the h/w a bit, like you've already done. Printing with PLA, the output is on par with much more expensive printers. It's the more difficult/exotic materials that make the difference IMHO. And based on Bitcoin's recent performance and expected 2021 price, you'd probably only need 0.1 BTC to get some of the best quality 3D printers out there... Life's sweet for BTC HoDLers! Yeah, the thing is a real bargain at 0.1 BTC (this includes a 1kg spool of excellent PLA). I switched to some *m*zon PLA for 0.0011 BTC per kg and that was a bad choice. The Anycubic PLA printed excellently, out of the box, while the cheap one gave me a hard time adjusting parameters to get mediocre results (like Arries mine replica). I always wanted to print ABS, ultimately for a DIY gun, so i came across PETG/CPE because of the fumes when printing ABS. This time i ordered from a specialized dealer. I got into CNC about a year ago (or make it two, in case my mind fails on this again), and i was thinking quite often about 3DP, but always forgot about it again, mainly because my research for the "best" budget printer never came to an end - a different story. However, for 0.1BTC this machine is excellent, in the meanwhile i got decent CPE results. And it seems to get "cheaper" over time as well. Thanks, Satoshi Yeah, ABS is quite a nasty material to print with. I wouldn't even try it on the Anycubic. As for PLA, I always go for high quality stuff, usually sold in 750 g spools costing around $30 each. Have tried cheap ones ($20 / kg), but results were noticeably inferior, not worth the savings. BTW, my 0.1 BTC comment was obviously not for the Anycubic—you can currently buy 10 Anycubics for that amount! Maybe you missed a zero in your post above. The Anycubic Mega S should now be around 0.01 BTC. My comment was that, in 2021, 0.1 BTC should easily buy you an Ultimaker S5-class 3D printer.
|
|
|
|
SATWAT
Member
Offline
Activity: 868
Merit: 46
|
|
December 18, 2020, 08:52:35 PM |
|
Poor him ? i dont know why my mind flash backed to summer 2017 Haha what a retard, I can't believe it... is that real? that is what i call a weak hand. on my first buy price crashed hard and did not recover for years. imagine this guy.. No one is sure about reality of this because sometime losers also done tricks like these for some intention on social media.
|
|
|
|
JimboToronto
Legendary
Offline
Activity: 4004
Merit: 4482
You're never too old to think young.
|
|
December 18, 2020, 08:55:30 PM |
|
Poor him ? i dont know why my mind flash backed to summer 2017 Haha what a retard, I can't believe it... is that real? that is what i call a weak hand. on my first buy price crashed hard and did not recover for years. imagine this guy.. Massive 100 GBP?
|
|
|
|
serveria.com
Legendary
Offline
Activity: 2240
Merit: 1172
Privacy Servers. Since 2009.
|
|
December 18, 2020, 09:04:09 PM |
|
That’s it, that’s the tweet........ Actually if it unfolds anything like 2017 did, Bitcoiners will hate it too. Because there will be an unbelievable amount of FUD and misinformation going on. I just don't see how we get a rise year like 2017 was and have it all buttery smooth, bullish, and non-controversial all the way up. I would love to be dead wrong, of course. Institutions don't buy FUD like average Joes do...
|
|
|
|
serveria.com
Legendary
Offline
Activity: 2240
Merit: 1172
Privacy Servers. Since 2009.
|
|
December 18, 2020, 09:05:33 PM |
|
Meanwhile, closing in on $23k again... I have a gut feeling this aint over yet...
|
|
|
|
SATWAT
Member
Offline
Activity: 868
Merit: 46
|
|
December 18, 2020, 09:10:06 PM |
|
Meanwhile, closing in on $23k again... I have a gut feeling this aint over yet... Most chances now we will stay around this figure for some time may be until new year.
|
|
|
|
jojo69
Legendary
Offline
Activity: 3164
Merit: 4345
diamond-handed zealot
|
|
|
|
|
serveria.com
Legendary
Offline
Activity: 2240
Merit: 1172
Privacy Servers. Since 2009.
|
|
December 18, 2020, 09:13:38 PM |
|
I'll support JimboToronto in this maybe it will help BTC rise...
|
|
|
|
OutOfMemory
Legendary
Offline
Activity: 1540
Merit: 3007
Man who stares at charts
|
|
December 18, 2020, 09:23:43 PM |
|
Yeah, the thing is a real bargain at 0.1 BTC (this includes a 1kg spool of excellent PLA). I switched to some *m*zon PLA for 0.0011 BTC per kg and that was a bad choice. The Anycubic PLA printed excellently, out of the box, while the cheap one gave me a hard time adjusting parameters to get mediocre results (like Arries mine replica). I always wanted to print ABS, ultimately for a DIY gun, so i came across PETG/CPE because of the fumes when printing ABS. This time i ordered from a specialized dealer. I got into CNC about a year ago (or make it two, in case my mind fails on this again), and i was thinking quite often about 3DP, but always forgot about it again, mainly because my research for the "best" budget printer never came to an end - a different story. However, for 0.1BTC this machine is excellent, in the meanwhile i got decent CPE results. And it seems to get "cheaper" over time as well. Thanks, Satoshi Yeah, ABS is quite a nasty material to print with. I wouldn't even try it on the Anycubic. As for PLA, I always go for high quality stuff, usually sold in 750 g spools costing around $30 each. Have tried cheap ones ($20 / kg), but results were noticeably inferior, not worth the savings. BTW, my 0.1 BTC comment was obviously not for the Anycubic—you can currently buy 10 Anycubics for that amount! Maybe you missed a zero in your post above. The Anycubic Mega S should now be around 0.01 BTC. My comment was that, in 2021, 0.1 BTC should easily buy you an Ultimaker S5-class 3D printer. OMG, yes. 0.01 BTC! I missed a zero The Ultimaker will be on my shopping list for sure if i print at least 3 times a week over the course of a year or so. Just printing an ipad stand from thingiverse, i can't stand it when my kids are literally letting their heads "hang" over the damn thing, when it's lying flat on a table or floor. 9 out of 10 times i design custom things, which is freaking easy using 3D Builder, but it has it's quirks when you're used to work, say with Auto Cad in 2D. I wrapped my head around FreeSCAD and the likes, but it was too hard for me to get into, as a man with like half of a brain. What's up with Bitcoin? Should i look up some christmas cards? With Tux, this time? Institutions don't buy FUD like average Joes do... You can count on institutional investors were watching at least one full market cycle, if not two.
|
|
|
|
cAPSLOCK
Legendary
Offline
Activity: 3738
Merit: 5127
Whimsical Pants
|
I bought Anycubic's newer Mega S. Prusa's are in the same range, afaik even better quality at the higher ended printers and have also good community support. ....
The Anycubic is an excellent choice! I've used it and it's one of the best VFM 3D printers out there. You just need to be comfortable with tweaking and tinkering with the h/w a bit, like you've already done. Printing with PLA, the output is on par with much more expensive printers. It's the more difficult/exotic materials that make the difference IMHO. And based on Bitcoin's recent performance and expected 2021 price, you'd probably only need 0.1 BTC to get some of the best quality 3D printers out there... Life's sweet for BTC HoDLers! Yeah, the thing is a real bargain at 0.1 BTC (this includes a 1kg spool of excellent PLA). I switched to some *m*zon PLA for 0.0011 BTC per kg and that was a bad choice. The Anycubic PLA printed excellently, out of the box, while the cheap one gave me a hard time adjusting parameters to get mediocre results (like Arries mine replica). I always wanted to print ABS, ultimately for a DIY gun, so i came across PETG/CPE because of the fumes when printing ABS. This time i ordered from a specialized dealer. I got into CNC about a year ago (or make it two, in case my mind fails on this again), and i was thinking quite often about 3DP, but always forgot about it again, mainly because my research for the "best" budget printer never came to an end - a different story. However, for 0.1BTC this machine is excellent, in the meanwhile i got decent CPE results. And it seems to get "cheaper" over time as well. Thanks, Satoshi Yeah, ABS is quite a nasty material to print with. I wouldn't even try it on the Anycubic. As for PLA, I always go for high quality stuff, usually sold in 750 g spools costing around $30 each. Have tried cheap ones ($20 / kg), but results were noticeably inferior, not worth the savings. BTW, my 0.1 BTC comment was obviously not for the Anycubic—you can currently buy 10 Anycubics for that amount! Maybe you missed a zero in your post above. The Anycubic Mega S should now be around 0.01 BTC. My comment was that, in 2021, 0.1 BTC should easily buy you an Ultimaker S5-class 3D printer. PLA is really wonderful... natural... biodegradable, but it has it's limits. You certainly can't do firearms with it. I did this great set of replacement knobs for my grill. So nice... Prusa silver with a little orange flame glued on them. I loved them. They fit so tightly (she whispered). Until you used the grill. They take enough ambient heat that the would get mushy... lol. So I had to use PETG. And I only had a sort of translucent blue. Oh well... it's kinda comical looking, but they don't melt. I built a Prusa 3 with my daughter... it was a LOT of fun. There are cheaper printers out there for sure... but the quality of that thing. The engineering. It's a work of art.
|
|
|
|
cAPSLOCK
Legendary
Offline
Activity: 3738
Merit: 5127
Whimsical Pants
|
|
December 18, 2020, 09:40:57 PM Merited by BobLawblaw (2) |
|
It's OVER TWENTY THREE!!!!
|
|
|
|
BobLawblaw
Legendary
Offline
Activity: 1826
Merit: 5551
Neighborhood Shenanigans Dispenser
|
It's OVER TWENTY THREE!!!!
We're re-testing levels established mere hours ago !!!
|
|
|
|
OutOfMemory
Legendary
Offline
Activity: 1540
Merit: 3007
Man who stares at charts
|
|
December 18, 2020, 09:50:48 PM |
|
PLA is really wonderful... natural... biodegradable, but it has it's limits. You certainly can't do firearms with it. I did this great set of replacement knobs for my grill. So nice... Prusa silver with a little orange flame glued on them. I loved them. They fit so tightly (she whispered). Until you used the grill. They take enough ambient heat that the would get mushy... lol. So I had to use PETG. And I only had a sort of translucent blue. Oh well... it's kinda comical looking, but they don't melt.
I built a Prusa 3 with my daughter... it was a LOT of fun. There are cheaper printers out there for sure... but the quality of that thing. The engineering. It's a work of art.
Congrats The prusa's indeed have high reputation in the 3dp community. I switched to the Anycubic only because of the price, which was below a prusa3 and the Ac still had a more sturdy looking frame, imho. Personally, i knew some people that had multiple printers, and i think i know why. One built his own, but he does things professionally (model kits) and had studied toolmaking and machine engineering, worked with multiple industry-grade machines of many kinds. That was a monster thing. I bought my first CNC from him. A total freak, of course EDIT: Bitcoin: Knock, knock! $23k:
|
|
|
|
|