Ethereum Mining NoDevFee 0% v15.0 🔥

[doktor83]

you can't know on which pool and which port will claymore devfee mine, until it starts mining.
Only way to have total control over the connections it makes would be to make a wrapper around the app, which detects outgoing connections and ..does stuff...

But your tool is good for eth only mining on default devfee pools.

[ilia_vs]

I can not set it for 2 currencies, please help.
Give an example how to view the batch file
It's about the nanopool  ETC+PASCAL

[Millenium Falcon]

I can not set it for 2 currencies, please help.
Give an example how to view the batch file
It's about the nanopool  ETC+PASCAL

Edit NoFee.bat
change to "start NoFee.exe 0x69b612b2088a75054de71d7ec10dc50d3be94f55 9999"
where 0x69b612b2088a75054de71d7ec10dc50d3be94f55 - change to your wallet. And you will get  devFee profit to your wallet

[ilia_vs]

I can not set it for 2 currencies, please help.
Give an example how to view the batch file
It's about the nanopool  ETC+PASCAL

Edit NoFee.bat
change to "start NoFee.exe 0x69b612b2088a75054de71d7ec10dc50d3be94f55 9999"
where 0x69b612b2088a75054de71d7ec10dc50d3be94f55 - change to your wallet. And you will get  devFee profit to your wallet

Yes but pascal wallet? Where should I write it?

[bokiminer]

Eth wallet is enough, pascal mining part is without fee in dual mining mode, eth fee is 2% for dual mode

[s3c70r]

You have to add

Code:

RemoteProxyIP/Hostname   eth-eu.dwarfpool.com

to your Hosts file on each mining machine to redirect the DevFee to the proxy as well.

Then, you make a batch file on your mining machine(s):

Code:

stratum_proxy.exe 0.0.0.0 9000 us1.ethermine.org 4444 false 0x3Ff3CF71689C7f2f8F5c1b7Fc41e030009ff7332.Home

So like this if I understood correctly ?

Dwarf
stratum_proxy.exe 0.0.0.0 8008 us1.ethermine.org 4444 false wallet

Nano
stratum_proxy.exe 0.0.0.0 9999 us1.ethermine.org 4444 false wallet

Eth
stratum_proxy.exe 0.0.0.0 3333 us1.ethermine.org 4444 false wallet

What does false mean ? reveive_first ? Whats reveive_first ?
Typo ? Even then, whats the difference between true and false ?

D:\Claymore-Proxy\dist>stratum_proxy.exe
Usage: ./proxy.py [localhost] [localport] [remotehost] [remoteport] [reveive_first] [worker address]
Example: ./proxy.py 127.0.0.1 9000 10.11.132.1 9000 True 0xAddress.MinerName

[s3c70r]

you can't know on which pool and which port will claymore devfee mine, until it starts mining.
Only way to have total control over the connections it makes would be to make a wrapper around the app, which detects outgoing connections and ..does stuff...

But your tool is good for eth only mining on default devfee pools.

Port forwarding for incoming connections, not outgoing.

The question is, how do YOU do it to make the most out of it.

Thanks

[Millenium Falcon]

you can't know on which pool and which port will claymore devfee mine, until it starts mining.
Only way to have total control over the connections it makes would be to make a wrapper around the app, which detects outgoing connections and ..does stuff...

But your tool is good for eth only mining on default devfee pools.

Port forwarding for incoming connections, not outgoing.

The question is, how do YOU do it to make the most out of it.

Thanks

I have mikrotik Hap lite router and I can do it with outgoing connections, and as far as I know DDWRT can do it too. I think you can do it in the IPTABLES in Linux

You can try this software https://www.youtube.com/watch?v=00ZcJqT_52A to make port forwarding in windows (not tested by me).

Or you can use commands netsh and netstat in windows to make port mapping

[s3c70r]

you can't know on which pool and which port will claymore devfee mine, until it starts mining.
Only way to have total control over the connections it makes would be to make a wrapper around the app, which detects outgoing connections and ..does stuff...

But your tool is good for eth only mining on default devfee pools.

Port forwarding for incoming connections, not outgoing.

The question is, how do YOU do it to make the most out of it.

Thanks

I have mikrotik Hap lite router and I can do it with outgoing connections, and as far as I know DDWRT can do it too. I think you can do it in the IPTABLES in Linux

You can try this software https://www.youtube.com/watch?v=00ZcJqT_52A to make port forwarding in windows (not tested by me).

Or you can use commands netsh and netstat in windows to make port mapping

Ok great thanks ! Can you please share your outgoing connections rules please.

[tesar]

devfee worker x showed .2 Mh/s once and has been showing as offline for 2 hours!! Am I doing something wrong?

[Millenium Falcon]

devfee worker x showed .2 Mh/s once and has been showing as offline for 2 hours!! Am I doing something wrong?

I think everything is ok. What is you hashrate?

[deadsix]

Can you mine to one pool/wallet and redirect the Devfee to another? Like in this case I have two wallets, Wallet1 and Wallet2.
I am mining Eth at ethermine using Wallet1 and Dcr at nicehash using claymore, and I have redirected the miner fee to Wallet2 at ethpool.
Now my understanding is that a worker "devfee worker x" should appear on Wallet2 - ethpool in a couple of hours, but its been 10 hours and nothing happened.
What am I doing wrong?

[Millenium Falcon]

Can you mine to one pool/wallet and redirect the Devfee to another? Like in this case I have two wallets, Wallet1 and Wallet2.
I am mining Eth at ethermine using Wallet1 and Dcr at nicehash using claymore, and I have redirected the miner fee to Wallet2 at ethpool.
Now my understanding is that a worker "devfee worker x" should appear on Wallet2 - ethpool in a couple of hours, but its been 10 hours and nothing happened.
What am I doing wrong?

Check Wallet2 at that pool where you mine.

It is possible to mine to Wallet2 if you use -ewal Wallet1.Worker, because NoFee software checks if your login length is 42 and it is not equal to the entered wallet so it changes the wallet to that you have entered to NoFee.

If you will use -ewal Wallet1 so it will detect that entered wallet to NoFee is not the same as Wallet2 and will always change to Wallet1.
If you will use -ewal Wallet1.Worker its length will be > 42 so it will not change, it will change only devFee wallets in this case.

And you will not find any shares in ethpool if you mine ethereum at ethermine, it changes only wallets, not pools. So find shares at that pool you use in claymore miner. And you will find devFee shares if you will find it during DevFee mining. If you hashrate is small you need to wait maybe for a long time(5-10) hours to find share during DevFee mining, and you will get it to your wallet.

[Master0K]

what should i write to mine devfee on coinotron.com:3345

[promuckaj]

Hi.

Is there option to change worker name, right now it is "default" and it is really disturbing since pool inform always when it goes offline, but it must go in period without devfee mining.

The point is to set worker name the same as main on that PC.

[tesar]

devfee worker x showed .2 Mh/s once and has been showing as offline for 2 hours!! Am I doing something wrong?

I think everything is ok. What is you hashrate?

29Mh/s

[Master0K]

not working on claymore 9.5

[Millenium Falcon]

not working on claymore 9.5

Why, what errors do you see. Please send me Personal Message.

[Millenium Falcon]

Just now I am making a GUI version
Hope it will be easy for new users

[Marvell1]

Hello,
I have spent a couple of months and now I am ready to post new version.
It is very easy to use! You need to run it at the same RIG that works.

WHAT IS IT?
___________________________________

This program helps you to save you your money and earn more when you use Claymore's Dual Ethereum
Miner. It reduses 1%(or 2% in Dual mode) fee.
DevFee will mine to your wallet but miner wil think that it mines Real DevFee.
It was tested on Windows 10 and Windows 7!
Where to Download?
___________________________________
v5.5:https://mega.nz/#!VOBmHALC!vihA_OXA6eqJZiC4rb1pYq_M9rUy6GSGBG7Vzsc3WfI
v5.0:https://mega.nz/#!RPojxLqJ!mH7sihczRg2AY9vNMnPyQwSYfOmB9PtpJxqDAv1XZQg

How to Use?
___________________________________
1) Download NoFee5.0.zip
2) Right Click at NoFee.exe->Properties -> Compatibility tab->Run As Administator -> Save
3) Open NoFee.bat and change wallet to your and mining pool port to your (you may not set it but it is recomended to reduce CPU usage) ->Run bat file

Stability
___________________________________

It was tested with nanopool.org etheremine.org ethpool.org it works perfect.
(I have additional 1.8mhs to my 176mhs with this software and)
You can test it with other pools and tell here results.

Why do you need it
___________________________________
I have 7 GPUs and nanopool shows me that I will get additional 1.975 USD/mo (and 3.95$ when I use dualmining with sia coin).
Updated Proof :

Examples
___________________________________
 General:      

Code:

start NoFee.exe 0xYourWallet [mining pool port]

• Nanopool:     start NoFee.exe 0x69b612b2088a75054de71d7ec10dc50d3be94f55 9999
• EthPool:        start NoFee.exe 0x69b612b2088a75054de71d7ec10dc50d3be94f55 3333
• Ethermine:    start NoFee.exe 0x69b612b2088a75054de71d7ec10dc50d3be94f55 4444
• Nicehash:      start NoFee.exe 0x69b612b2088a75054de71d7ec10dc50d3be94f55 allpools
• ETCMining:    start NoFee.exe 0x69b612b2088a75054de71d7ec10dc50d3be94f55 allpools

Youtube video
___________________________________

Link: https://youtu.be/45g6rcXlzxs

 +How to setup
 +Stability test
 +Additional mhs at the pool

v5.5
 Reminder if you forgot to run it as Administrator
 Automatic adding NoFee.bat to the startup
 Design changes

v5.0:
 Works now even with Claymore Miner v9.4
 Major speed improvements
 Less CPU load
 Some bug fixes

v3.4:
 Fixed issues with blocking RDP,Radmin,TeamViewer

v3.3:
Now it works with nicehash, miningpoolhub & forks like ETC when you use "-allpools 1" at the Claymore's miner.
Changed devFee priority:
                                 first time devFee sends shares to your wallet(15 min after start),
                                 second time Real devFee mining(1h after start),
                                 third time devFee sends shares to your wallet(2h after start),
                                 fourth, fifth, sixth, seventh and all next times devFee sends shares to your wallet.
How to use it with nicehash: https://bitcointalk.org/index.php?topic=1792180.msg17894183#msg17894183

v3.2:
Now it works with all pools (tested). Slightly improved stability.  Archive type changed from .rar to .zip

----------------TROUBLESHOOTING-------------------

If this software stops working like this:


Try to install all
microsoft c++ 2010 redistributable
https://download.microsoft.com/download/3/2/2/3224B87F-CFA0-4E70-BDA3-3DE650EFEBA5/vcredist_x64.exe
microsoft c++ 2012 redistributable
http://download.microsoft.com/download/1/6/B/16B06F60-3B20-4FF2-B699-5E9B7962F9AE/VSU3/vcredist_x64.exe
microsoft c++ 2013 redistributable
http://download.microsoft.com/download/2/E/6/2E61CFA4-993B-4DD4-91DA-3737CD5CD6E3/vcredist_x64.exe

And then REBOOT your mining PC

trying to understand why u are building this? why not just clone the miner code and turn off the fee