💥SOLARIS PLATFORM [XLR] 💥Swapping to FinaToken

[viscolex]

Where do I add the rar files?

solaris-daemon-2.2.0.0-win64.zip

What are you trying to do?

[1715320679]

1715320679

[1715320679]

1715320679

[cpimentel]

Where do I add the rar files?

solaris-daemon-2.2.0.0-win64.zip

What are you trying to do?

update the wallet

[viscolex]

Where do I add the rar files?

solaris-daemon-2.2.0.0-win64.zip

What are you trying to do?

update the wallet

On your Desktop?

Then you should download this file: https://github.com/Solaris-Project/Solaris/releases/download/v2.2.0.0/solaris-qt-2.2.0.0-win64.zip

Extract the file to where your wallet is, I like to create a separate folder for the new Wallet and use it.

Also, don't forget to back-up your wallet.dat file.

[vamp8]

Кaкoй зaкoн гoвopит чтo тeбe вooбщe ктo тo чтo тo дoлжeн? Tы пoкyпaeшь фaнтики. Hиктo ничeгo зa ниx тeбe нe дoлжeн. Этo кpиптa co cвoими peaлиями дe фaктo. Я пoнимaю чтo oбиднo т.к. coляpa cтaлa cтoить 3$ нo yвы oбмeн вceгдa имeeт cpoки дaжe кoгдa гocyдapcтвo дeнoминиpyeт cвoю вaлютy. Oпoздaл - твoи пpoблeмы. Heзнaниe зaкoнa нe ocвoбoждaeт знaeшь ли.

Life will show. The developer gave me 2 months to exchange, I give him until 10:00 a.m. Monday, Moscow time, for the indefinite renewal of the exchange. Monday send out letters to the stock exchange , on Wednesday send a letter with a request to check the activities of stock exchanges which will trade XLR.
_____________
Жизнь пoкaжeт. Paзpaбoтчик дaл мнe 2 мecяцa нa oбмeн, я дaю eмy вpeмя дo 10:00 пoнeдeльникa пo Mocкoвcкoмy вpeмeни для бeccpoчнoгo вoзoбнoвлeния oбмeнa. B пoнeдeльник paccылaю пиcьмa cчacтья нa биpжи , в cpeдy paccылaю пиcьмa c пpocьбoй пpoвepить дeятeльнocть биpж нa кoтopыx бyдeт тopгoвaтьcя XLR.

you are not a crow, you are a member, damn it, do not deceive people here

[forexs]

I already update my wallet , and my wallet have some Masternodes running with node-vps.com  . Do I have to update my Masternodes too and how ? THANKS  

[forexs]

I don't have my wallet on VPS , I just buy nodes from node-vps.com and run Masternodes on local wallet on my computer , and already update my wallet and all Masternodes still running good,do I still have to update my Masternodes , PLEASE HELP THANKS .

[travelninja]

I already update my wallet , and my wallet have some Masternodes running with node-vps.com  . Do I have to update my Masternodes too and how ? THANKS  

You will have to update your MN wallet. Node-vps does all the setup for you so you'll have to get in touch with them to update the wallet.

[cpimentel]

Where do I add the rar files?

solaris-daemon-2.2.0.0-win64.zip

What are you trying to do?

update the wallet

On your Desktop?

Then you should download this file: https://github.com/Solaris-Project/Solaris/releases/download/v2.2.0.0/solaris-qt-2.2.0.0-win64.zip

Extract the file to where your wallet is, I like to create a separate folder for the new Wallet and use it.

Also, don't forget to back-up your wallet.dat file.

Thank you so much

[abudfv2008]

Guys,

I still have Solaris (XLR) in cryptopia and it has zero value. Did I lose those coins? I can not change them by XLR with new algorithm?

Hello. It depends on Your ability to defend your property.

Ox Vorona34 нy пpoвopoнил oбмeн и нaчaл дypaкa вaлять. Кoгo интepecнo ты тyт пытaeшьcя нaпyгaть "пиcьмaми" cчacтья.
Tвoи мoнeты y тeбя, никтo иx нe кpaл. Ax дa - oни ceйчac ничeгo нe cтoят, нy тaк и битoк зaвтpa мoжeт лeчь нa днo и чтo? Taк чтo бepи вeткy nist5 в cвoи pyки и paзвивaй, вывoди нa биpжy. Зaщищaй cвoи мoнeты 

[Dabs]

Unfortunately, the time for swapping is over and that's your fault.

It's a lie

What's a lie? That it's your fault? So it's NOT your fault is the truth? Or the time for swapping is over is a lie?

What I can clearly tell you are two things:

1. The time for swapping is over. The deadline has come and gone. Two months. You were online at that time, you were even posting in other threads
2. It's your fault for not swapping.

The other things are:

1. You want XEVAN XLR to get delisted on whatever exchanges have it right now.
2. You still have your NIST5 XLR. By not doing anything, you have decided to keep it.
3. You want everyone else to lose their money if you succeed. You are going to make a lot of other people upset or angry.

If you want something equal, maybe since the dev gave you two months to exchange, you should give the dev two months to respond to your request before you do anything.

I would like to ask, how many NIST5 XLR do you have?

[striker7334 2.0]

Excellent new wallet! I'm loving the development phases successfully meeting the deadlines especially on the actual date promised that is a huge bonus! But now that this portion of the roadmap is complete what kind of project should we fund to keep the growth coming, like with the developers getting a cut soon from the mn that should help things a lot! I haven't checked the slack or discord channel much(I need to) but is there any talks about how we plan to market XLR's privacy features in a unique way from other coins??

[scorpio18]

https://pool.coin-miners.info/  upgraded the wallet to the latest version

[alinka]

Im interested in this project. But what problem does this project solve? what does this project offer that other masternode-coins dont have? Good luck.

[jubeis_coffee]

Hi,

I never setup a Masternode with the old code, just started once I updated to the zXLR code base that was just recently published to github. I followed the instructions posted, but am using my own node, so I set 127.0.0.1 instead of what would be a VPS server at some public IP address. I saw where it said to set externalip=<ipaddress> to this public IP VPS server, but since I'm using the same server, I just set it to 127.0.0.1 in case the setting just needed to be there. Upon restarting the node via the instructions, I got this:

---begin cli output snippet------

************************
EXCEPTION: N5boost16exception_detail10clone_implINS0_19error_info_injectorINS_16bad_lexica l_castEEEEE      
bad lexical cast: source type value could not be interpreted as target      
solaris in AppInit()

----end cli output snippet-------

Please keep in mind I'm not using the gui, and was able to get all the information I needed using:
./solaris-cli getnewaddress "<new alias>"
./solaris-cli sendtoaddress "<new address created with new alias>
./solaris-cli listtransactions
./solaris-cli masternode genkey
./solaris-cli masternode outputs
nano /home/user/.solaris/solaris.conf
nano /home/user/.solaris/masternode.conf
./solaris-cli stop
./solarisd -daemon

I filled out the masternode.conf and solaris.conf file per the instructions as well. Any ideas why this isn't working?

For the alias, I just ran ./solaris-cli getnewaddress "<new alias> to generate a new address, then deposited exactly 1000 xlr and the contents reflect as such. I also let is get more than 219 confirmations as well before attempting to alter the masternode.conf file.

Also... When I comment out the additions for creating the masternode, "solarisd -daemon" starts just fine and my balances are fine as well so that's a relief.

I hope this is obvious as to what I'm missing. Keep in mind, I don't like GUIs period. I'm old school like that. All I have is CLI linux Ubuntu 16.04 LTS loaded.

[coinskeeper]

Hi folks, could someone share opinion how price of the coin will be in January? Thank you.

[zdeni82]

Hi folks, could someone share opinion how price of the coin will be in January? Thank you.

I think it will be 10$ by the end of the January after the
20.01.2018.
This is my opinion and I hope that it will be at least 10$.
We will see after the new feature kicks in 

[viscolex]

Hi,

I never setup a Masternode with the old code, just started once I updated to the zXLR code base that was just recently published to github. I followed the instructions posted, but am using my own node, so I set 127.0.0.1 instead of what would be a VPS server at some public IP address. I saw where it said to set externalip=<ipaddress> to this public IP VPS server, but since I'm using the same server, I just set it to 127.0.0.1 in case the setting just needed to be there. Upon restarting the node via the instructions, I got this:

---begin cli output snippet------

************************
EXCEPTION: N5boost16exception_detail10clone_implINS0_19error_info_injectorINS_16bad_lexica l_castEEEEE      
bad lexical cast: source type value could not be interpreted as target      
solaris in AppInit()

----end cli output snippet-------

Please keep in mind I'm not using the gui, and was able to get all the information I needed using:
./solaris-cli getnewaddress "<new alias>"
./solaris-cli sendtoaddress "<new address created with new alias>
./solaris-cli listtransactions
./solaris-cli masternode genkey
./solaris-cli masternode outputs
nano /home/user/.solaris/solaris.conf
nano /home/user/.solaris/masternode.conf
./solaris-cli stop
./solarisd -daemon

I filled out the masternode.conf and solaris.conf file per the instructions as well. Any ideas why this isn't working?

For the alias, I just ran ./solaris-cli getnewaddress "<new alias> to generate a new address, then deposited exactly 1000 xlr and the contents reflect as such. I also let is get more than 219 confirmations as well before attempting to alter the masternode.conf file.

Also... When I comment out the additions for creating the masternode, "solarisd -daemon" starts just fine and my balances are fine as well so that's a relief.

I hope this is obvious as to what I'm missing. Keep in mind, I don't like GUIs period. I'm old school like that. All I have is CLI linux Ubuntu 16.04 LTS loaded.

I'm not a dev, so I can't troubleshoot technically why this happened. But, have you tried these two commands as well before starting the daemon:

chmod 777 solarisd

chmod 777 solaris-cli

[Elder III]

Het, SolarisDev, did i miss something, or there's no All Masternodes tab in the new wallet?  CAn't say that i need it very much, but there was some useful info, like total masternodes count.

If you go

Tools
Debug console
Information

It will tell you how many masternodes there are.

There is still a Masternodes tab in the wallet. Either click the arrow to the right of the new Privacy tab, or make your wallet fullscreen so that there is room for all the tabs to show up.

[Lercker]

Hi,

I never setup a Masternode with the old code, just started once I updated to the zXLR code base that was just recently published to github. I followed the instructions posted, but am using my own node, so I set 127.0.0.1 instead of what would be a VPS server at some public IP address. I saw where it said to set externalip=<ipaddress> to this public IP VPS server, but since I'm using the same server, I just set it to 127.0.0.1 in case the setting just needed to be there. Upon restarting the node via the instructions, I got this:

---begin cli output snippet------

************************
EXCEPTION: N5boost16exception_detail10clone_implINS0_19error_info_injectorINS_16bad_lexica l_castEEEEE      
bad lexical cast: source type value could not be interpreted as target      
solaris in AppInit()

----end cli output snippet-------

Please keep in mind I'm not using the gui, and was able to get all the information I needed using:
./solaris-cli getnewaddress "<new alias>"
./solaris-cli sendtoaddress "<new address created with new alias>
./solaris-cli listtransactions
./solaris-cli masternode genkey
./solaris-cli masternode outputs
nano /home/user/.solaris/solaris.conf
nano /home/user/.solaris/masternode.conf
./solaris-cli stop
./solarisd -daemon

I filled out the masternode.conf and solaris.conf file per the instructions as well. Any ideas why this isn't working?

For the alias, I just ran ./solaris-cli getnewaddress "<new alias> to generate a new address, then deposited exactly 1000 xlr and the contents reflect as such. I also let is get more than 219 confirmations as well before attempting to alter the masternode.conf file.

Also... When I comment out the additions for creating the masternode, "solarisd -daemon" starts just fine and my balances are fine as well so that's a relief.

I hope this is obvious as to what I'm missing. Keep in mind, I don't like GUIs period. I'm old school like that. All I have is CLI linux Ubuntu 16.04 LTS loaded.

Not that I think this is your main problem but 127.0.0.1 is not your IP address. You need to access your router and put in your actual IP. You should go on Discord where one of the devs is often there to help.

[Mike_IG]

Het, SolarisDev, did i miss something, or there's no All Masternodes tab in the new wallet?  CAn't say that i need it very much, but there was some useful info, like total masternodes count.

If you go

Tools
Debug console
Information

It will tell you how many masternodes there are.

There is still a Masternodes tab in the wallet. Either click the arrow to the right of the new Privacy tab, or make your wallet fullscreen so that there is room for all the tabs to show up.

They are talking about the "All Masternodes tab" that was within The Masternodes tab you are talking about, Within the Masternodes section it used to have "My Masternodes" and "All Masternodes" and the "All Masternodes" section used to list the IP addresses of all the Masternodes and how long they used to be running not just your own and the total number of them. Now on the Masternode tab it goes straight to what used to be the "My Masternodes" screen from the old wallet.