andrew24p
|
|
May 10, 2017, 05:18:47 PM |
|
the claiming is very profitable, if you sign a message with 1000 bitcoin you get 1000 bitcore? lol that is 1.4 bitcoin for free, this is wrong it help the richer get even richer, wasn't better to do it with a fixed amount?
1.4 bitcoin isnt an incentive for enough people with 1000 bitcoin to link their address, just because of logistical stuff (getting it out of storage, potentially risking hacking, potentially revealing identity ect.) I mean some do, but if you look at the byteball which is the same thing, in fact you end up getting much more there, even many long time holders arent linking addresses. Also it wont matter much in 6 months when everything unclaimed gets redistributed to people who are holding bitcore. Your best bet if you want to be one of the rich addresses here is to buy up bitcore in small amounts over a 6 month period.
|
|
|
|
|
Mitja1998
Newbie
Offline
Activity: 56
Merit: 0
|
|
May 10, 2017, 05:59:13 PM |
|
Is 9000 kh/s good for rx470? I've seen that riskyFire have about 9000 kh/s on gtx 970. The 5000 kh/s one is hd7950 and almost 10000 kh/s one is rx480 8gb. https://i.imgur.com/YQyAUMA.jpg
|
|
|
|
Neon~
|
|
May 10, 2017, 05:59:26 PM Last edit: May 10, 2017, 07:06:39 PM by Neon~ |
|
Hi BitCore miners, I just did a major overhaul of BitCore neonpool (http://neonpool.sytes.net) for easy mining! New Features added: - New UI design
- Help page is updated with latest miner links and instructions to start the mining without roadblocks
- Pool Stats page will now show details of the blocks mined (block number/paid/immature/who found the block etc.)
- Pool Stats page will now show pool hash-rate details in real-time in an easy to read graph
- Pool Stats page will now show BitCore network details in real-time
- Miner details page will show the miner's pending balance, paid amount and hash-rate in an easy to read graph
This is mainly a change in user interface and the back-end is kept intact without affecting the pending balance/shares of miners. If you appreciate the effort, feel free to try out the pool and let me know your suggestions/comments. BitCore neonpool - http://neonpool.sytes.net Minimum payout: 0.1 BTX Pool fee: 1% (Pool pays miner payout transaction fee)
Restarted the pool once to add immature block details to pool website. You might have noticed temporary disconnects from pool, but all back to normal now. Please make sure your miners are connected to pool after restart. Btw, new block found after site overhaul!!
|
|
|
|
Kryptowerk
Legendary
Offline
Activity: 2100
Merit: 1403
Disobey.
|
|
May 10, 2017, 07:13:36 PM |
|
Hi BitCore miners, I just did a major overhaul of BitCore neonpool (http://neonpool.sytes.net) for easy mining! New Features added: - New UI design
- Help page is updated with latest miner links and instructions to start the mining without roadblocks
- Pool Stats page will now show details of the blocks mined (block number/paid/immature/who found the block etc.)
- Pool Stats page will now show pool hash-rate details in real-time in an easy to read graph
- Pool Stats page will now show BitCore network details in real-time
- Miner details page will show the miner's pending balance, paid amount and hash-rate in an easy to read graph
This is mainly a change in user interface and the back-end is kept intact without affecting the pending balance/shares of miners. If you appreciate the effort, feel free to try out the pool and let me know your suggestions/comments. BitCore neonpool - http://neonpool.sytes.net Minimum payout: 0.1 BTX Pool fee: 1% (Pool pays miner payout transaction fee)
Restarted the pool once to add immature block details to pool website. You might have noticed temporary disconnects from pool, but all back to normal now. Please make sure your miners are connected to pool after restart. Btw, new block found after site overhaul!! I like the pool! Very clean and fast website. Hope more people hop on board.
|
|
|
|
GamerMiner
Member
Offline
Activity: 93
Merit: 10
|
|
May 10, 2017, 07:41:09 PM |
|
Is 9000 kh/s good for rx470? I've seen that riskyFire have about 9000 kh/s on gtx 970. The 5000 kh/s one is hd7950 and almost 10000 kh/s one is rx480 8gb. That's the results a friend got from his RX 470 and also for his GTX 970. I get a bit more than 10 000 kh/s per RX 480 8gb, 10 000 kh/s with a GTX 1060 (intensity @17 because it is a laptop) and 16 000 kh/s from my GTX 980ti. Hope it helps you Btw the provided sgminer doesn't seem to work well with R9 290 (with intensity @10 I get 600 kh/s per card)
|
Everyone is welcome to mine with us to support decentralization. We're currently at 0% fee.
|
|
|
antaja
|
|
May 10, 2017, 08:00:16 PM |
|
Is 9000 kh/s good for rx470? I've seen that riskyFire have about 9000 kh/s on gtx 970. The 5000 kh/s one is hd7950 and almost 10000 kh/s one is rx480 8gb. That's the results a friend got from his RX 470 and also for his GTX 970. I get a bit more than 10 000 kh/s per RX 480 8gb, 10 000 kh/s with a GTX 1060 (intensity @17 because it is a laptop) and 16 000 kh/s from my GTX 980ti. Hope it helps you Btw the provided sgminer doesn't seem to work well with R9 290 (with intensity @10 I get 600 kh/s per card) which miner do you use for nvidia?
|
|
|
|
Mitja1998
Newbie
Offline
Activity: 56
Merit: 0
|
|
May 10, 2017, 08:15:28 PM |
|
Is 9000 kh/s good for rx470? I've seen that riskyFire have about 9000 kh/s on gtx 970. The 5000 kh/s one is hd7950 and almost 10000 kh/s one is rx480 8gb. https://i.imgur.com/YQyAUMA.jpgThat's the results a friend got from his RX 470 and also for his GTX 970. I get a bit more than 10 000 kh/s per RX 480 8gb, 10 000 kh/s with a GTX 1060 (intensity @17 because it is a laptop) and 16 000 kh/s from my GTX 980ti. Hope it helps you Btw the provided sgminer doesn't seem to work well with R9 290 (with intensity @10 I get 600 kh/s per card) Did you try higher intensity? I get only 60 kh/s with -I 8 but at -I 23 is max that Works for me and it is way faster.
|
|
|
|
GamerMiner
Member
Offline
Activity: 93
Merit: 10
|
|
May 10, 2017, 08:21:02 PM |
|
That's the results a friend got from his RX 470 and also for his GTX 970. I get a bit more than 10 000 kh/s per RX 480 8gb, 10 000 kh/s with a GTX 1060 (intensity @17 because it is a laptop) and 16 000 kh/s from my GTX 980ti. Hope it helps you
Btw the provided sgminer doesn't seem to work well with R9 290 (with intensity @10 I get 600 kh/s per card)
which miner do you use for nvidia? I use this ccminer : http://bitsend.info/forums/index.php?topic=178.msg1298#msg1298 That's the results a friend got from his RX 470 and also for his GTX 970. I get a bit more than 10 000 kh/s per RX 480 8gb, 10 000 kh/s with a GTX 1060 (intensity @17 because it is a laptop) and 16 000 kh/s from my GTX 980ti. Hope it helps you
Btw the provided sgminer doesn't seem to work well with R9 290 (with intensity @10 I get 600 kh/s per card)
Did you try higher intensity? I get only 60 kh/s with -I 8 but at -I 23 is max that Works for me and it is way faster. I tried upto 22 but the miner seemed to hang on indefinitely, i stopped it after an hour. My R9's are bios modded do you think it could be an issue ? I'm just curious and it can still help people that would have the same issue, but i disassembled the R9's rig as I received my RX 480 today
|
Everyone is welcome to mine with us to support decentralization. We're currently at 0% fee.
|
|
|
European Central Bank
Legendary
Offline
Activity: 1288
Merit: 1087
|
|
May 10, 2017, 08:23:52 PM |
|
Also it wont matter much in 6 months when everything unclaimed gets redistributed to people who are holding bitcore.
do you have any idea whether that includes exchange balances too? i like the sound of this project but i don't have the bandwidth for full nodes or wallets right now.
|
|
|
|
Mitja1998
Newbie
Offline
Activity: 56
Merit: 0
|
|
May 10, 2017, 08:29:10 PM |
|
That's the results a friend got from his RX 470 and also for his GTX 970. I get a bit more than 10 000 kh/s per RX 480 8gb, 10 000 kh/s with a GTX 1060 (intensity @17 because it is a laptop) and 16 000 kh/s from my GTX 980ti. Hope it helps you
Btw the provided sgminer doesn't seem to work well with R9 290 (with intensity @10 I get 600 kh/s per card)
which miner do you use for nvidia? I use this ccminer : http://bitsend.info/forums/index.php?topic=178.msg1298#msg1298 That's the results a friend got from his RX 470 and also for his GTX 970. I get a bit more than 10 000 kh/s per RX 480 8gb, 10 000 kh/s with a GTX 1060 (intensity @17 because it is a laptop) and 16 000 kh/s from my GTX 980ti. Hope it helps you
Btw the provided sgminer doesn't seem to work well with R9 290 (with intensity @10 I get 600 kh/s per card)
Did you try higher intensity? I get only 60 kh/s with -I 8 but at -I 23 is max that Works for me and it is way faster. I tried upto 22 but the miner seemed to hang on indefinitely, i stopped it after an hour. My R9's are bios modded do you think it could be an issue ? I'm just curious and it can still help people that would have the same issue, but i disassembled the R9's rig as I received my RX 480 today I don't think it should matter because I also have modded hd7950. I had some problems at start. Afterburner showed +0 voltage at slidebar but it should show +956. So I restarted the computer and then it worked.
|
|
|
|
GamerMiner
Member
Offline
Activity: 93
Merit: 10
|
|
May 10, 2017, 08:34:23 PM |
|
I don't think it should matter because I also have modded hd7950. I had some problems at start. Afterburner showed +0 voltage at slidebar but it should show +956. So I restarted the computer and then it worked.
I restarted it too, updated drivers and so on, the problem might be in my end still. I don't know and I give up, RX 480 saved me from investigating further lol I'll put my R9's on Ebay because I can't keep all of them
|
Everyone is welcome to mine with us to support decentralization. We're currently at 0% fee.
|
|
|
Neon~
|
|
May 10, 2017, 09:02:45 PM |
|
Is 9000 kh/s good for rx470? I've seen that riskyFire have about 9000 kh/s on gtx 970. The 5000 kh/s one is hd7950 and almost 10000 kh/s one is rx480 8gb. That's the results a friend got from his RX 470 and also for his GTX 970. I get a bit more than 10 000 kh/s per RX 480 8gb, 10 000 kh/s with a GTX 1060 (intensity @17 because it is a laptop) and 16 000 kh/s from my GTX 980ti. Hope it helps you Btw the provided sgminer doesn't seem to work well with R9 290 (with intensity @10 I get 600 kh/s per card) which miner do you use for nvidia? I use this for Nvidia - https://github.com/palginpav/ccminer/releases/tag/2.0-bitcore.v3 and found it pretty stable.
|
|
|
|
Mrbates
Sr. Member
Offline
Activity: 546
Merit: 250
Maybe a fed.
|
|
May 10, 2017, 09:05:11 PM |
|
I have 6200 kh/s on a nvidia 1050
|
|
|
|
Neon~
|
|
May 10, 2017, 09:23:42 PM |
|
Hi BitCore miners, I just did a major overhaul of BitCore neonpool (http://neonpool.sytes.net) for easy mining! New Features added: - New UI design
- Help page is updated with latest miner links and instructions to start the mining without roadblocks
- Pool Stats page will now show details of the blocks mined (block number/paid/immature/who found the block etc.)
- Pool Stats page will now show pool hash-rate details in real-time in an easy to read graph
- Pool Stats page will now show BitCore network details in real-time
- Miner details page will show the miner's pending balance, paid amount and hash-rate in an easy to read graph
This is mainly a change in user interface and the back-end is kept intact without affecting the pending balance/shares of miners. If you appreciate the effort, feel free to try out the pool and let me know your suggestions/comments. BitCore neonpool - http://neonpool.sytes.net Minimum payout: 0.1 BTX Pool fee: 1% (Pool pays miner payout transaction fee)
Restarted the pool once to add immature block details to pool website. You might have noticed temporary disconnects from pool, but all back to normal now. Please make sure your miners are connected to pool after restart. Btw, new block found after site overhaul!! I like the pool! Very clean and fast website. Hope more people hop on board. Thanks! Me too hoping for the same
|
|
|
|
Smokeyw
|
|
May 10, 2017, 11:06:06 PM |
|
all miners close right away on amd what im doing wrong ?
|
|
|
|
jonald_fyookball
Legendary
Offline
Activity: 1302
Merit: 1008
Core dev leaves me neg feedback #abuse #political
|
|
May 10, 2017, 11:56:37 PM |
|
The claiming period is 6 months. After this period we split the rest to the BTX Holder. 10% from the unclaimed rest is for the BitCore Foundation. After 6 months-> formula is beta (your_amout_after_6_months)=((premine_balance*0,9)/(available_amount_total=(BTX_amount_ total./.(premine_balance*0,9))))*your_balance Example: (304,61 BTX)=((14.400.000)/2.600.000))*55 BTX) (BTX_amount_ total=17MIO) This doesn't make sense to me. Where did they get available total amount? Why is that only 2.6M and premine bal is 14.4M? Where does the 55 come from?
|
|
|
|
GlacierBits
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 03:15:24 AM |
|
I'm trying to claim from my nano ledger. But unalbe to work out how has anyone done it?
|
|
|
|
finder
|
|
May 11, 2017, 04:19:43 AM |
|
No plan to other exchanges
|
|
|
|
marco89
Member
Offline
Activity: 157
Merit: 10
|
|
May 11, 2017, 06:35:12 AM |
|
No plan to other exchanges agree... what about poloniex, bittrex, novaexchange?
|
BTC: 1NCJRUoVo1L1SV4kJDk5e9Ai67ZufEbFnw
|
|
|
|