lan787
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 106
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 04:55:42 PM |
|
Mine seem to max out around 11.5GH each.. i checked the voltage and they're all at ~1.20-1.23V, clock setting: High
For the people that are seeing 13GH, have you done anything different or tweaked anything in your setup?
is that 13GH on the web blade web interface? or as reported by your pool?
The interface reports 13GH/s, the pool reports 12.5GH/s. I did no tweaking at all.
|
|
|
|
desired_username
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 05:20:49 PM |
|
mine works in the 11500-13500 range (web), and pool reports 10000-12500 so far
|
|
|
|
Pinwheel
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 05:22:13 PM |
|
When I restart a blade it takes approx 15mins to reach it's full speed (around 13ghs).
You could try running a local stratum proxy and see if it makes any difference?
I'm running a local stratum proxy. Current Setup is blade at 192.168.1.20, proxy at 192.168.1.10, then to slush. I wasn't happy with the 6 gh/s attempts this morning, so I am trying to reconfigure the blade for bitminter. I'll report back later today with the approx speed after a few hours. try to test it on mmpool.bitparking.com from all pools which I tested this one gives pretty accurate hash rate in short time.
|
Tom Waits: We should just start as soon as possible cause we might catch a rabbit before we have our pants on. (Juxtapoz)
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 05:30:36 PM |
|
Just my luck. One of my cards is well behaved, the other is a diva. Its convinced itself that its so fucking precious that it has an efficiency of 102%.
BAD GIRL.
|
|
|
|
Omen1855
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 111
Merit: 10
Bitcoin Entrepreneur
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 06:53:02 PM |
|
Mine seem to max out around 11.5GH each.. i checked the voltage and they're all at ~1.20-1.23V, clock setting: High
For the people that are seeing 13GH, have you done anything different or tweaked anything in your setup?
is that 13GH on the web blade web interface? or as reported by your pool?
I also noticed a serious difference between slush pool results and bitminter with getwork. Former goes up to 13 GH/s the latter 3 GH/s, while bitminter does report 10 GH/s. So try with a stratum proxy and different pools. I don't want to fiddle with the overclocking just yet, I'll let a braver man lead the way there.
|
Affiliation code wTksie2mDj for a 10% discount on your trading fees on BitFinex
|
|
|
Caesium
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 07:12:49 PM |
|
Our units are already overclocked aren't they? They came at 1.2v, all you have to do is press "Switch Clock" to go to High.
|
|
|
|
michelet
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 170
Merit: 100
www.easyha.sh
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 07:18:07 PM |
|
Yes I think they are already overclocked. I also have a blade from first auction and for that I had to change manually the voltage to 1.2. These are already preset to 1.2V
|
|
|
|
Omen1855
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 111
Merit: 10
Bitcoin Entrepreneur
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 07:51:52 PM |
|
Did anyone start plotting the regions yet in which Asic Miners are running? Would be nice to see where all this hashing power is travelling to.
|
Affiliation code wTksie2mDj for a 10% discount on your trading fees on BitFinex
|
|
|
desired_username
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 07:51:55 PM |
|
Anyone care to post how many BTCs did their HW got in the first 24h?
Mine will complete the 1st 24h in 1,5 hours. (got 3.57 so far)
|
|
|
|
drlatino999
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 07:55:25 PM |
|
Mine seem to max out around 11.5GH each.. i checked the voltage and they're all at ~1.20-1.23V, clock setting: High
For the people that are seeing 13GH, have you done anything different or tweaked anything in your setup?
is that 13GH on the web blade web interface? or as reported by your pool?
I also noticed a serious difference between slush pool results and bitminter with getwork. Former goes up to 13 GH/s the latter 3 GH/s, while bitminter does report 10 GH/s. So try with a stratum proxy and different pools. I don't want to fiddle with the overclocking just yet, I'll let a braver man lead the way there. I'm checking back in, bitminter 6 hours in is reporting just under 6 gh/s. I'm going to check the voltage settings when I get home, this seems too low. Setup Erupter (192.168.1.20) -> Local Stratum Proxy (192.168.1.10) -> Bitminter
|
Sappers clear the way
|
|
|
Caesium
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 08:03:42 PM |
|
Anyone care to post how many BTCs did their HW got in the first 24h?
Mine will complete the 1st 24h in 1,5 hours. (got 3.57 so far)
3.57?! How? With 4 blades right? Mine have only been running about 10 hours but that's enough to make a decent forecast.. exactly 1BTC mined so far (though I was messing about with configs for some of it and rebooting them a bit), so I should be at about 2.4BTC after 24h. This matches what IRC says.. 21:03 <+Caesium> ;; genrate 50000 21:03 <+gribble> The expected generation output, at 50000.0 Mhps, given difficulty of 10076292.8834, is 2.49549374085 BTC per day and 0.103978905869 BTC per hour. So after fees 2.4BTC looks decent enough..
|
|
|
|
lan787
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 106
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 08:09:26 PM |
|
Anyone care to post how many BTCs did their HW got in the first 24h?
Mine will complete the 1st 24h in 1,5 hours. (got 3.57 so far)
I got 0.8 BTC in first day. Few hours blade was offline as I was experimenting with the cooling. Lucky ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
desired_username
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 08:20:59 PM |
|
Anyone care to post how many BTCs did their HW got in the first 24h?
Mine will complete the 1st 24h in 1,5 hours. (got 3.57 so far)
3.57?! How? With 4 blades right? Mine have only been running about 10 hours but that's enough to make a decent forecast.. exactly 1BTC mined so far (though I was messing about with configs for some of it and rebooting them a bit), so I should be at about 2.4BTC after 24h. This matches what IRC says.. 21:03 <+Caesium> ;; genrate 50000 21:03 <+gribble> The expected generation output, at 50000.0 Mhps, given difficulty of 10076292.8834, is 2.49549374085 BTC per day and 0.103978905869 BTC per hour. So after fees 2.4BTC looks decent enough.. yes, 4 blades.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 08:27:08 PM |
|
On stock clocks mine run at 10.7. Overclocked after an hour 12.450 on both which is a bit disappointing ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Temps are pretty hot too even with 120mm on heatsink and the 2 small fans on the power board.
|
|
|
|
candoo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 08:53:11 PM |
|
Hey folks,
iam working on a tutorial to mount the block erupter in the avalon case! At the spot where the 4th module should be.
Anyone intrested in a tutorial? If so, you may pay me some cents to get it a little bit quicker online.!
|
Einer trage des andern Last, so werdet ihr das Gesetz Christi erfüllen.
|
|
|
desired_username
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 09:38:24 PM |
|
On stock clocks mine run at 10.7. Overclocked after an hour 12.450 on both which is a bit disappointing ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Temps are pretty hot too even with 120mm on heatsink and the 2 small fans on the power board. I think it's normal. I mean at this very moment I read 12.5, 12.9, 12.8, 12.9 all on high clock. Also, it can fluctuate quite a bit. ____ the first 24h completed, it did 3.96 so 0.99 / blade.
|
|
|
|
Caesium
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2013, 09:58:13 PM |
|
the first 24h completed, it did 3.96 so 0.99 / blade.
Which pool is this on? Seems like some really good luck?
|
|
|
|
drlatino999
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2013, 01:15:02 AM |
|
Anyone have issues with their board resetting all the time according to the web interface? I'm lucky for it to stay on for more than 15 minutes before it drops and resets.
|
Sappers clear the way
|
|
|
friedcat (OP)
Donator
Legendary
Offline
Activity: 848
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2013, 02:21:50 AM |
|
Anyone have issues with their board resetting all the time according to the web interface? I'm lucky for it to stay on for more than 15 minutes before it drops and resets.
The boards reset when there are period of time during which not enough shares are accepted. So there must be problem either with the network setting or the board itself. Please first try using a backup proxy/port/userpass combination that is different to the primary one. Also please check the hashrate reported by the web interface. If there are further problem, please contact me.
|
|
|
|
drlatino999
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2013, 02:37:40 AM |
|
Anyone have issues with their board resetting all the time according to the web interface? I'm lucky for it to stay on for more than 15 minutes before it drops and resets.
The boards reset when there are period of time during which not enough shares are accepted. So there must be problem either with the network setting or the board itself. Please first try using a backup proxy/port/userpass combination that is different to the primary one. Also please check the hashrate reported by the web interface. If there are further problem, please contact me. Will do, I'll let it run overnight and report what it gives back. What exactly does this part of the web interface mean? Chip: OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO Image here
|
Sappers clear the way
|
|
|
|