FlapXcoin Back on the move Listings, Pools, Games, More. Flappycoin, FLAP FLAPX

[Sravas]

Okay ... I'd better explain my situation ...

I installed "your version 3.2.0 ..." on two PCs, and I can move my coins from 1 PC to the other PC ... Does this mean that everything is OK or not

QT ver.3.2.0 is not working with current blockchain.
It's not possible move coins between old wallets.
But possible to recover old wallet/wallets on new blockchain in QT ver.5
If you have several old wallets with different addresses, you must recover every of them apart.

If you have only one old wallet and want to move coins to other PC:

Use 3.2.0 only for privatekey dumping on first PC (debug command in console).
Save this privkey.

Go to second PC.
Check whether directory ..AppData/Roaming/Flappycoin exist.
If YES, rename entire folder to other name, for example /FlappycoinOLD
Better way is to make archive copy of this old folder somewhere in secure place away from ..AppData/Roaming.
May be this folder contain another old wallet and you want to recover this one too.

Download new QT ver. 5 from Github, save proper .conf file and .lib

Start QT ver. 5 application. Wait for full synchronization.
You will have 0 (ZERO) balance at this point. It's normal.
QT ver. 5 will create new clear wallet on "clear" PC (old Flappycoin folder is renamed to FlappycoinOLD or moved to archive copy (not removed forever !!!) and not seen by application).
So this ZERO in not your balance yet.
Go to debug window.
Type importprivkey yoursavedprivatekey
Press Enter and wait some minutes for full blockchain scan.
Your old wallet with all previous information (old address, coin amount, thansaction data) will be recovered.
Wait for full synchronization.
Exit application.
Save arhive of entire new ..AppData/Roaming/Flappycoin folder in secure place.
Save archive of your new wallet.dat file from ..AppData/Roaming/Flappycoin in secure place.

NEVER LEAVE YOR WALLET.DAT FILE NOR PRIVATEKEY STRING ELSEWHERE IN PUBLIC ACCESSIBLE PLACES !

If you have "several" old wallets with the same address but different coin amount (actually the same wallet from different PC), you will have the last coin amount recorded in blockchain (according to last confirmed transaction for this address).

If you have more than one old wallet, save them all in secure place before any manipulation.
Rename every wallet.dat file to different name (for example, wallet-YEAR-MONTH-DAY.dat) to prevent overwrite.
Make privatekey for every old one
(copy back to old ..AppData/Roaming/Flappycoin folder on first PC
rename wallet-YEAR-MONTH-DAY.dat to standard wallet.dat
start ver.3.2.0 application
dump privatekey and save)

Import every privatekey in QT ver. 5 on second PC and save every new recovered wallet under unique name.

[ugabuga]

Okay ... I'd better explain my situation ...

I installed "your version 3.2.0 ..." on two PCs, and I can move my coins from 1 PC to the other PC ... Does this mean that everything is OK or not

QT ver.3.2.0 is not working with current blockchain.
It's not possible move coins between old wallets.
But possible to recover old wallet/wallets on new blockchain in QT ver.5
If you have several old wallets with different addresses, you must recover every of them apart.

If you have only one old wallet and want to move coins to other PC:

Use 3.2.0 only for privatekey dumping on first PC (debug command in console).
Save this privkey.

Go to second PC.
Check whether directory ..AppData/Roaming/Flappycoin exist.
If YES, rename entire folder to other name, for example /FlappycoinOLD
Better way is to make archive copy of this old folder somewhere in secure place away from ..AppData/Roaming.
May be this folder contain another old wallet and you want to recover this one too.

Download new QT ver. 5 from Github, save proper .conf file and .lib

Start QT ver. 5 application. Wait for full synchronization.
You will have 0 (ZERO) balance at this point. It's normal.
QT ver. 5 will create new clear wallet on "clear" PC (old Flappycoin folder is renamed to FlappycoinOLD or moved to archive copy (not removed forever !!!) and not seen by application).
So this ZERO in not your balance yet.
Go to debug window.
Type importprivkey yoursavedprivatekey
Press Enter and wait some minutes for full blockchain scan.
Your old wallet with all previous information (old address, coin amount, thansaction data) will be recovered.
Wait for full synchronization.
Exit application.
Save arhive of entire new ..AppData/Roaming/Flappycoin folder in secure place.
Save archive of your new wallet.dat file from ..AppData/Roaming/Flappycoin in secure place.

NEVER LEAVE YOR WALLET.DAT FILE NOR PRIVATEKEY STRING ELSEWHERE IN PUBLIC ACCESSIBLE PLACES !

If you have "several" old wallets with the same address but different coin amount (actually the same wallet from different PC), you will have the last coin amount recorded in blockchain (according to last confirmed transaction for this address).

If you have more than one old wallet, save them all in secure place before any manipulation.
Rename every wallet.dat file to different name (for example, wallet-YEAR-MONTH-DAY.dat) to prevent overwrite.
Make privatekey for every old one
(copy back to old ..AppData/Roaming/Flappycoin folder on first PC
rename wallet-YEAR-MONTH-DAY.dat to standard wallet.dat
start ver.3.2.0 application
dump privatekey and save)

Import every privatekey in QT ver. 5 on second PC and save every new recovered wallet under unique name.

First of all, thank you very much for your explanation. I'm sure you can help a lot of people, besides me ...

Basically what I had done was:

PC 1 ----> I copy flappycoin-5 windows qt.exe from GIT HUB, copied libwinpthread-1.zip and BOOTSTRAP file from https://sites.google.com/view/flappycoin/wallets

I let the network synchronize, I got into ... / roamin / flappycoin / and I put my old wallet.

I went out and went back into my wallet, and there was my old balance ...


PC 2 ----> Same thing as PC 1 but kept the wallet automatically created ...



- Then I sent 1 flap (which cost me 37 Flapp cost ... LOL) from the wallet from PC1 (old) to PC2 (new) and that flap is available in the new wallet ..

But I will install on a third PC, let sync without BOOTSTRAP, and in the end change the automatically created wallet, by my oldest ...


EDIT: Upsssss... I do not know if the flap transferred properly, had been mined in the meantime ..

[Sravas]

Okay ... I'd better explain my situation ...

I installed "your version 3.2.0 ..." on two PCs, and I can move my coins from 1 PC to the other PC ... Does this mean that everything is OK or not

If you have "several" old wallets with the same address but different coin amount (actually the same wallet from different PC), you will have the last coin amount recorded in blockchain (according to last confirmed transaction for this address).

It seems to be situation described above:
1 FLAP balance PC #2
OLD BALANCE minus 1 FLAP (sent) minus 37 FLAP (comission) PC #1
OLD BALANCE PC #3

PC #1 and PC #3 wallets must be identical as recovered from the same old wallet with the same address.

BUT current amounts are "different" because PC #3 don't see your last transaction.

Unfortunately I have not FLAP QT on hand right now and can't check - please try RPC commands in debug window on PC #3:

repairwallet
or
rescan

(you can type help before that and check if command is allowed in current QT version)

You must have identical transactions and coin amounts on both PC #1 and #3 thereafter.

[Sravas]

if repairwallet command / blockchain rescanning doesn't work - try privatekey dump/import
your funds are stored primary in blockchain, not in the wallet.dat file 

use Blockexplorer for detailed imformation about every transaction status

Simple Blockcrawler
http://blockcrawler.rf.gd/index.php

[uBm]

Block crawler does not show all old transactions somehow... but in the end your coins shouldbe fine with importing private keys on the new wallet.
i am also struggling with building the wallet for debian, cannot get it compiled -.-

[wailord284]

Block crawler does not show all old transactions somehow... but in the end your coins shouldbe fine with importing private keys on the new wallet.
i am also struggling with building the wallet for debian, cannot get it compiled -.-

I also am having trouble compiling the wallet on Arch or Ubuntu. The problem appears to be based around the version of OpenSSL needed to compile it. If you use wine and run the windows application for flappycoin, it has been compiled with OpenSSL 1.0.1s. Unfortunately on Arch downgrading this far causes instability and Ubuntu I could not get working either. However, I did have success compiling the daemon flappycoind on a raspberryPi running raspbian and am working on creating another node for the network.

[wailord284]

Don't mean to double post but, I created another node that anyone can use by adding addnode=172.91.203.163:11556 to their conf file. Here it is connected to my FlappycoinQT client.
{
"addr" : "172.91.203.163:11556",
"services" : "00000003",
"lastsend" : 1499709670,
"lastrecv" : 1499709670,
"bytessent" : 772,
"bytesrecv" : 19851,
"blocksrequested" : 0,
"conntime" : 1499709587,
"version" : 91337,
"subver" : "/Flaptoshi:3.2.0/",
"inbound" : false,
"startingheight" : 757557,
"banscore" : 0
},

[uBm]

nice, are you able to create a binary that could run on debian ? - using a windows wallet for the block crawler at the moment, and i want to switch it to my vserver

[wailord284]

nice, are you able to create a binary that could run on debian ? - using a windows wallet for the block crawler at the moment, and i want to switch it to my vserver

I can give it a try. I'm not too familiar with the process but I'll give it a shot. If you know how to do it, let me know otherwise I can just kinda mess around and see what I can do.

[spartagates]

Okay ... I'd better explain my situation ...

I installed "your version 3.2.0 ..." on two PCs, and I can move my coins from 1 PC to the other PC ... Does this mean that everything is OK or not

QT ver.3.2.0 is not working with current blockchain.
It's not possible move coins between old wallets.
But possible to recover old wallet/wallets on new blockchain in QT ver.5
If you have several old wallets with different addresses, you must recover every of them apart.

If you have only one old wallet and want to move coins to other PC:

Use 3.2.0 only for privatekey dumping on first PC (debug command in console).
Save this privkey.

Go to second PC.
Check whether directory ..AppData/Roaming/Flappycoin exist.
If YES, rename entire folder to other name, for example /FlappycoinOLD
Better way is to make archive copy of this old folder somewhere in secure place away from ..AppData/Roaming.
May be this folder contain another old wallet and you want to recover this one too.

Download new QT ver. 5 from Github, save proper .conf file and .lib

Start QT ver. 5 application. Wait for full synchronization.
You will have 0 (ZERO) balance at this point. It's normal.
QT ver. 5 will create new clear wallet on "clear" PC (old Flappycoin folder is renamed to FlappycoinOLD or moved to archive copy (not removed forever !!!) and not seen by application).
So this ZERO in not your balance yet.
Go to debug window.
Type importprivkey yoursavedprivatekey
Press Enter and wait some minutes for full blockchain scan.
Your old wallet with all previous information (old address, coin amount, thansaction data) will be recovered.
Wait for full synchronization.
Exit application.
Save arhive of entire new ..AppData/Roaming/Flappycoin folder in secure place.
Save archive of your new wallet.dat file from ..AppData/Roaming/Flappycoin in secure place.

NEVER LEAVE YOR WALLET.DAT FILE NOR PRIVATEKEY STRING ELSEWHERE IN PUBLIC ACCESSIBLE PLACES !

If you have "several" old wallets with the same address but different coin amount (actually the same wallet from different PC), you will have the last coin amount recorded in blockchain (according to last confirmed transaction for this address).

If you have more than one old wallet, save them all in secure place before any manipulation.
Rename every wallet.dat file to different name (for example, wallet-YEAR-MONTH-DAY.dat) to prevent overwrite.
Make privatekey for every old one
(copy back to old ..AppData/Roaming/Flappycoin folder on first PC
rename wallet-YEAR-MONTH-DAY.dat to standard wallet.dat
start ver.3.2.0 application
dump privatekey and save)

Import every privatekey in QT ver. 5 on second PC and save every new recovered wallet under unique name.

I'm a bit confused. I downloaded the new wallet (its named flappycoin-5 windows qt but confusingly it's version 3.2.0.0 - I think that's just an oversight). I just synced the wallet and then copied over my old wallet dat and the coins show up fine. Will these coins vanish after the swap?

[uBm]

Version on account flapmin ( the V5 one) has interal version 3.2 in the code, but the new pow enabled, he dit prop. forget to change the version number ?? - it´s shown as 3.2 here also.


edit: after restarting the crawler wallet i do only have 1 connection, srsly, we need more nodes.

[ugabuga]

What is needed to configure a node? Maybe I can help and do something on my part for the coin ..

[uBm]

What is needed to configure a node? Maybe I can help and do something on my part for the coin ..

For running a node, just run the wallet and leave it open, for running a dedcated node, run it on a server 24/7.

[wailord284]

Turned my wallet on today and I'm glad to see I have 7 node connections! Very exciting and good for this coin.

[ugabuga]

What is needed to configure a node? Maybe I can help and do something on my part for the coin ..

For running a node, just run the wallet and leave it open, for running a dedcated node, run it on a server 24/7.

OK ... I'll leave then wallet open and run a board ITX ... no need to open ports on the router?


EDIT: no need mining? only open?

[uBm]

You dont need to mine actually, but you can do it of course. open port 11555/11556 for having the node accessable.
edit: 11556 should be good, 11555 would be for json, / mining

[ugabuga]

You dont need to mine actually, but you can do it of course. open port 11555/11556 for having the node accessable.
edit: 11556 should be good, 11555 would be for json, / mining

OK. Done.

[csseyah]

Is there a new giveaways on this good coin?

[flappycoinrevive]

our only mining pool has been shutdown. Can anyone startup another one. Reward offering.

[ugabuga]

One more node:

addnode=94.61.193.156:11556