|
noreit
Newbie
Offline
Activity: 30
Merit: 0
|
|
July 24, 2017, 01:13:15 PM |
|
Definitely luck as it seems, have 2 same cards (SN is just +1) and one card is definitely little worse. Honestly, for now makes heat most problems for me, as in my rig I have cards right side by side (because of PCI-e slots are so close to each other and still waiting for PCI-e riser to solve it. I dont actually think that +0,5-1mh/s matters considering time spend with tuning bios (I guess you will agree).
|
|
|
|
Branko
|
|
July 24, 2017, 02:01:45 PM |
|
Definitely luck as it seems, have 2 same cards (SN is just +1) and one card is definitely little worse. Honestly, for now makes heat most problems for me, as in my rig I have cards right side by side (because of PCI-e slots are so close to each other and still waiting for PCI-e riser to solve it. I dont actually think that +0,5-1mh/s matters considering time spend with tuning bios (I guess you will agree).
Ethereum-wise, probably not...I guess its just toying with technology...much more people use RX570/580 cards and I often saw people going from 29.8 to 29.9 and cheering it as some kind of victory Just check threads about those cards I have similar configuration as you do, 2 cards in my PC, and one in main pci-e x16 conenctor have heat issues too, as rest of system is very hot 8320E CPU and also very hot motherboard VRMs... Everything should run much betetr on pci-e risers during this hot summer (32C in my PC room)
|
|
|
|
StraabdenDaals
Newbie
Offline
Activity: 49
Merit: 0
|
|
July 24, 2017, 02:10:32 PM |
|
Can anybody show me an example of the xfx 560 single fan model hitting 14/15 with Hynix or Micron? I'm convinced that there is something fundemantally different about this model - I can't get past 13.5 with Micron or 12.5 with Hynix.
|
|
|
|
biggee
Member
Offline
Activity: 73
Merit: 10
|
|
July 25, 2017, 11:22:31 AM |
|
Jesus there are some greedy people in this thread.
Trying to sell modded BIOS' for 0.1BTC or 0.85 ETH - fuck the fuck off!
It takes 5 minutes to watch a youtube video (or search a forum, this thread is a good start) and mod & flash these BIOS' yourself. Then a bit of effort to test and tweak your cards, which if you are serious about this is a joy not a burden.
As if miners aren't taking the piss out of each other enough already with the resale prices of cards (saw somebody on Ebay asking £500 for a 4GB RX470 Nitro+ just last week) now they are trying to cash in on newbs for something that they could do themselves with 5 minutes of research.
Where has the team spirit gone?
|
|
|
|
h311m4n
|
|
July 25, 2017, 12:25:16 PM |
|
Jesus there are some greedy people in this thread.
Trying to sell modded BIOS' for 0.1BTC or 0.85 ETH - fuck the fuck off!
It takes 5 minutes to watch a youtube video (or search a forum, this thread is a good start) and mod & flash these BIOS' yourself. Then a bit of effort to test and tweak your cards, which if you are serious about this is a joy not a burden.
As if miners aren't taking the piss out of each other enough already with the resale prices of cards (saw somebody on Ebay asking £500 for a 4GB RX470 Nitro+ just last week) now they are trying to cash in on newbs for something that they could do themselves with 5 minutes of research.
Where has the team spirit gone?
team what? 100% agree though. I've see some idiot trying to sell a 4 card mining rig (470/480s) for like 2500$. Told him it was complete bullshit, like it would take over a year to ROI on that poor thing and it was maybe worth 1000$ tops. He assured me it was worth well over 2000$ with all the time and effort...offered him 150$ per card, never responded back lol
|
|
|
|
Branko
|
|
July 25, 2017, 12:51:10 PM |
|
Jesus there are some greedy people in this thread.
Trying to sell modded BIOS' for 0.1BTC or 0.85 ETH - fuck the fuck off!
It takes 5 minutes to watch a youtube video (or search a forum, this thread is a good start) and mod & flash these BIOS' yourself. Then a bit of effort to test and tweak your cards, which if you are serious about this is a joy not a burden.
As if miners aren't taking the piss out of each other enough already with the resale prices of cards (saw somebody on Ebay asking £500 for a 4GB RX470 Nitro+ just last week) now they are trying to cash in on newbs for something that they could do themselves with 5 minutes of research.
Where has the team spirit gone?
I'd agree with you about a week ago, now when I see someone asking 0.85 ETH or 0.1 BTC, I cheer them and say "go for it"
|
|
|
|
Rikhard
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 25, 2017, 01:32:53 PM |
|
Hello everyone,
I have been watching the progress of your analysis on the RX 560 4GB and I would like to share my findings, since I have 2 units of Sapphire RX 560 Pulse 4GB myself.
My stats are as follows:
Miner: Claymore 9.7 Dual Mining - ETH + DCR Current hash rate per card: 13.7 MH/s (ETH) + 365 MH/s (DCR)
I'm running for more than a month already both GPUs with the following settings (BIOS Modded):
- 1500 Strap to 1625, 1750 and 2000. - MemClock increased from 1750 Mhz to 2017 Mhz (maximum safe without memory errors - validate with HWiNFO64) - Increased Max Power Limit to 85 - GPU Core timings - all decreased and last one is 1120Mhz (minimum GPU Core) [Could be lower I think, but decreases dual mining] - Max GPU Freq. = 1400 Mhz - Max Memory Freq. = 2200 Mhz - Decreased Max. Temp in FAN and PowerTune to 82ºC and decreased the overall FAN + Temps settings so it maintains the temperatures down.
- This is a very stable reesult, running for many days.
I have also pushed the memory clocks up, until 2150Mhz, but after 2025 Mhz it gets unstable and crashes the miner. I managed to reach 14.9 MH/s (ETH) + 400 MH/s (DCR) in Dual minig but totally unstable after a few minutes.
I hope it helps you guys getting a few more MH/s from your cards.
For any donation or something, please reach me by PM. Thank you!
|
|
|
|
justchil
Member
Offline
Activity: 92
Merit: 10
|
|
July 26, 2017, 01:52:08 AM Last edit: July 26, 2017, 02:06:45 AM by justchil |
|
Any have issues getting voltage control to work in afterburner with 560's? I tried different drivers / beta versions of AB but no luck so far. I know you can manually edit profiles/cardcfg but that doesn't give you the "power" graphs too :\
|
|
|
|
Rikhard
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 26, 2017, 02:49:57 PM |
|
Any have issues getting voltage control to work in afterburner with 560's? I tried different drivers / beta versions of AB but no luck so far. I know you can manually edit profiles/cardcfg but that doesn't give you the "power" graphs too :\
Hello, In MSI Afterburner it doesn't work. I had changed it all over PolarisBiosEditor and checked the running values with HWiNFO64.
|
|
|
|
dniwaunuiwdniu
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 26, 2017, 07:07:04 PM |
|
HI
first of all i was following this thread from the start and i am giving a big THANK YOU to all of the people who shared their experience with the cards. Because of you i am getting stable 13,8 - 14 MH/s and i am truly happy with it.
I will share something more if i am sure about it.
But now i have a problem.
I have 12x sapphire RX 560 4GB Micron. My Mobo is: Asus Prime Z270-P Gaming
I was working with only 4 GPU's because i am still waiting for more risers and psu. Yesterday i got the rest of my cards. I flashed everyone with the working modded bios (and saved the original). When i connect 6 cards (one on the mobo and 4 with risers), i can see the cards in the hardware manager, but only 2 of them are working. The other 4 has a yellow circle. I tried to flash the original again and reinstall the driver. Also right click, update driver and choose the C0316027 file. Nothing worked. I tried with 5 cards. Also 2 working and the other 3 not. But when i only connect 4, they work.
The risers are fine, i tested them all. Also all the gpus are working.
Whats the problem? and how did you manage to get 6 gpus working?
|
|
|
|
votsirh
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 26, 2017, 09:34:44 PM |
|
HI
first of all i was following this thread from the start and i am giving a big THANK YOU to all of the people who shared their experience with the cards. Because of you i am getting stable 13,8 - 14 MH/s and i am truly happy with it.
I will share something more if i am sure about it.
But now i have a problem.
I have 12x sapphire RX 560 4GB Micron. My Mobo is: Asus Prime Z270-P Gaming
I was working with only 4 GPU's because i am still waiting for more risers and psu. Yesterday i got the rest of my cards. I flashed everyone with the working modded bios (and saved the original). When i connect 6 cards (one on the mobo and 4 with risers), i can see the cards in the hardware manager, but only 2 of them are working. The other 4 has a yellow circle. I tried to flash the original again and reinstall the driver. Also right click, update driver and choose the C0316027 file. Nothing worked. I tried with 5 cards. Also 2 working and the other 3 not. But when i only connect 4, they work.
The risers are fine, i tested them all. Also all the gpus are working.
Whats the problem? and how did you manage to get 6 gpus working?
4g Decoding enabled from the MB Bios ?
|
|
|
|
justchil
Member
Offline
Activity: 92
Merit: 10
|
|
July 26, 2017, 10:04:18 PM |
|
Any have issues getting voltage control to work in afterburner with 560's? I tried different drivers / beta versions of AB but no luck so far. I know you can manually edit profiles/cardcfg but that doesn't give you the "power" graphs too :\
Hello, In MSI Afterburner it doesn't work. I had changed it all over PolarisBiosEditor and checked the running values with HWiNFO64. Ok so it's not just me. I did the same. Thank you
|
|
|
|
votsirh
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 27, 2017, 07:02:01 AM |
|
To all miners with RX560, who achieved 14mh/s and more.
What driver version you guys use ?
Cheers
|
|
|
|
dniwaunuiwdniu
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 27, 2017, 08:54:39 AM |
|
HI
first of all i was following this thread from the start and i am giving a big THANK YOU to all of the people who shared their experience with the cards. Because of you i am getting stable 13,8 - 14 MH/s and i am truly happy with it.
I will share something more if i am sure about it.
But now i have a problem.
I have 12x sapphire RX 560 4GB Micron. My Mobo is: Asus Prime Z270-P Gaming
I was working with only 4 GPU's because i am still waiting for more risers and psu. Yesterday i got the rest of my cards. I flashed everyone with the working modded bios (and saved the original). When i connect 6 cards (one on the mobo and 4 with risers), i can see the cards in the hardware manager, but only 2 of them are working. The other 4 has a yellow circle. I tried to flash the original again and reinstall the driver. Also right click, update driver and choose the C0316027 file. Nothing worked. I tried with 5 cards. Also 2 working and the other 3 not. But when i only connect 4, they work.
The risers are fine, i tested them all. Also all the gpus are working.
Whats the problem? and how did you manage to get 6 gpus working?
4g Decoding enabled from the MB Bios ? Thx for your answer. I enabled it, but when i start my windows i only got a black screen. I couldnt see anything. So i disabled it again. I did not change anything else in the mobo bios. and i forgot to mention. Its error code 12 on the gpu Hope someone can help me to get all the gpus to run ~~
|
|
|
|
Branko
|
|
July 27, 2017, 09:10:56 AM |
|
To all miners with RX560, who achieved 14mh/s and more.
What driver version you guys use ?
Cheers
I always use the last, no issues with any yet...but I don't have dedicated rig, its just my everyday PC (and another that kids use)
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
July 28, 2017, 02:40:31 AM |
|
i think the 560 are not bad
but i m so disappointed for my last 2 buys, i buy 460's because i found some cheaper)
but my 460 ring is very bad it s msi 460 4G without power connector (stuck on 11mh) the ram is very bad only 1 gpu is able to overclock the ram , the other they fail if you past 1750 (even they crash at 1750 with modified traps)
and i bought 2 x 370 4G asus , oh my good why did i buy this ? it s a very bad gpu and more expensive than the 560
i have some 270 2G msi what did a pretty good job (18.2mh on exp) , so i assume it was mostly the same gpu but it should be named a 360 not a 370 lol , it s lagging some shaders
the 370 memory did overclock pretty good (1400 to 1525) but problem it doesn't nothing on the speed lol , i don't understand why ? it has more bandwidth does only 10mh on eth and 14.8 on exp (far from the 18 of the 270's)
|
|
|
|
maselitto90
Newbie
Offline
Activity: 28
Merit: 0
|
|
July 28, 2017, 07:11:10 AM |
|
Radeon RX 560 2G for mining??
|
|
|
|
h311m4n
|
|
July 28, 2017, 07:51:45 AM |
|
Radeon RX 560 2G for mining??
Nope.
|
|
|
|
mauver_korea
Newbie
Offline
Activity: 47
Merit: 0
|
|
July 28, 2017, 07:54:58 AM |
|
I think you mine the Music coin + Sia .
It's good profit for your GPU
|
|
|
|
|